Jump to content
SAU Community

Recommended Posts

Wrecking R32 GTS-T.

Main items listed below, however too many parts to list them all. If you need something, just ask as there is every chance i'll have it.

Also have a few other random parts from RB25 and RB26. See bottom of post.

Pickup from either Traralgon or Melbourne - Sth eastern suburbs.

Happy to post if buyer pays postage.

Can supply more info and better photos for anything on request.

PM, or call / SMS - Mike 0412 678 973

Front guards - Both LHS & RHS. Black. No dents or creases. $50 each

Rear bar (not inc reverse lights) $60

Boot lid $50

Headlights $80 each, or $150 pair

Rear lights $40 each, or $70 pair

Indicators - 1 x LHS clear, 1 x LHS orange, 1 x RHS smoke $50 each

Complete dash - has the bubble in the usual place. See pics. $100

Glove box/s $30

Center console/s $30

Speedo/gauge cluster 139xxx km's $80

Speedo surround (inc headlight switches etc) - one in standard black, one painted silver - see photos. $60 each

Kick panels LHS & RHS available $20 each

Steering wheel surround plastics $30

AC/Climate control unit $40

Plastic stereo surround - painted silver - cracked at bottom $20

Gearbox/manual conversion kit - everything except flywheel $750

Top mix racing seat - no rails. Set up in fixed position in R32. $80

Standard seats - driver and passenger - good condition $35 each

Standard radiator $80

Standard fan $20

R33 RB25 tailshaft $100

Standard RB26 turbos - excellent condition $250

RB26 airbox $60

More available that i have forgotten about. Just ask if you need anything in particular.

Prices on most things are negotiable. Happy to consider reasonable offers.

Mike - 0412 678 973

post-33046-0-78731800-1409816106_thumb.jpg post-33046-0-57055900-1409816198_thumb.jpg post-33046-0-99932000-1409818789_thumb.jpg

post-33046-0-22025200-1409818889_thumb.jpg post-33046-0-31316100-1409819347_thumb.jpg post-33046-0-60879800-1409819784_thumb.jpg

post-33046-0-23047500-1409819995_thumb.jpg post-33046-0-25775100-1409820120_thumb.jpg post-33046-0-77783400-1409820522_thumb.jpg

post-33046-0-08354700-1409820666_thumb.jpg post-33046-0-81143200-1409820773_thumb.jpg

Edited by xtra.5

Mate, I'm looking for the driver side rubber strip that goes between door card and the glass on the inside. If in good condition

Got it?

Mate, I'm looking for the driver side rubber strip that goes between door card and the glass on the inside. If in good condition

Got it?

Mate, I'm looking for the driver side rubber strip that goes between door card and the glass on the inside. If in good condition

Got it?

Do you mean the felt bit that is attached to the top of the door trim?

any updates mate? have you got this trim part?

Hey mate, ive got it but not in good condition. its not straight and wont provide a good seal against the window.

Manual conversion sold.

Drivers headlight and passenger rear light sold.

Boot lid and rear bar sold.

Still got plenty here.

Also have R32 RB20 ABS Tailshaft available $100

Hybrid (i think) front mount cooler $60

  • 2 weeks later...

Interested in the:

Stock Seats

Clear indicator

Glove box (I hope this is the same as 4-doors)

Stereo surround

AC/Climate control

DIN brackets if you happen to have them

pick up SE burbs.

Interested in the:

Stock Seats

Clear indicator

Glove box (I hope this is the same as 4-doors)

Stereo surround

AC/Climate control

DIN brackets if you happen to have them

pick up SE burbs.

PM sent

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Nah no bearings, just slip fit.  Would be a reasonably challenging but not impossible job to modify it to run bearings but I'm hoping that's not necessary as I may have well built one myself if I end up spending hours modifying it!
    • Brumbys with good shells are bloody expensive, I've looked at 2 "cheaper" cars, and walked away from both,  plus after some research spare parts are fairly sparce I'm starting to think that I missed the boat on finding a clean one that is straight (ish) and without alot rust I'm starting to think about a old Hilux as panels and other parts are much more available as they sold tens of thousands of them I use to be indecisive but now I'm not sure
    • A Brumby would probably fit a big metal toolbox in the back... this is how it begins  
    • Picked up a new OEM boot seal for the MX5 today as the old one got ripped a bit by me being a idiot by seeing if I could fit a large metal tool box in it, it didn't fit, and ripped the seal with the corner of the tool box I am still waiting on time to get the cams and new balancer installed, as well as the repairs to the boot Time will not be an issue soon though
    • I was more thinking so it doesn't flop around as much rather than for rotating it. Once you have the balance right, it should rotate well enough, depending on how much resistance there is on the pivot. I think you said the pivot point was on a bearing though didn't you?
×
×
  • Create New...