Jump to content
SAU Community

Recommended Posts

Wrecking R32 GTS-T.

Main items listed below, however too many parts to list them all. If you need something, just ask as there is every chance i'll have it.

Also have a few other random parts from RB25 and RB26. See bottom of post.

Pickup from either Traralgon or Melbourne - Sth eastern suburbs.

Happy to post if buyer pays postage.

Can supply more info and better photos for anything on request.

PM, or call / SMS - Mike 0412 678 973

Front guards - Both LHS & RHS. Black. No dents or creases. $50 each

Rear bar (not inc reverse lights) $60

Boot lid $50

Headlights $80 each, or $150 pair

Rear lights $40 each, or $70 pair

Indicators - 1 x LHS clear, 1 x LHS orange, 1 x RHS smoke $50 each

Complete dash - has the bubble in the usual place. See pics. $100

Glove box/s $30

Center console/s $30

Speedo/gauge cluster 139xxx km's $80

Speedo surround (inc headlight switches etc) - one in standard black, one painted silver - see photos. $60 each

Kick panels LHS & RHS available $20 each

Steering wheel surround plastics $30

AC/Climate control unit $40

Plastic stereo surround - painted silver - cracked at bottom $20

Gearbox/manual conversion kit - everything except flywheel $750

Top mix racing seat - no rails. Set up in fixed position in R32. $80

Standard seats - driver and passenger - good condition $35 each

Standard radiator $80

Standard fan $20

R33 RB25 tailshaft $100

Standard RB26 turbos - excellent condition $250

RB26 airbox $60

More available that i have forgotten about. Just ask if you need anything in particular.

Prices on most things are negotiable. Happy to consider reasonable offers.

Mike - 0412 678 973

post-33046-0-78731800-1409816106_thumb.jpg post-33046-0-57055900-1409816198_thumb.jpg post-33046-0-99932000-1409818789_thumb.jpg

post-33046-0-22025200-1409818889_thumb.jpg post-33046-0-31316100-1409819347_thumb.jpg post-33046-0-60879800-1409819784_thumb.jpg

post-33046-0-23047500-1409819995_thumb.jpg post-33046-0-25775100-1409820120_thumb.jpg post-33046-0-77783400-1409820522_thumb.jpg

post-33046-0-08354700-1409820666_thumb.jpg post-33046-0-81143200-1409820773_thumb.jpg

Edited by xtra.5

Mate, I'm looking for the driver side rubber strip that goes between door card and the glass on the inside. If in good condition

Got it?

Mate, I'm looking for the driver side rubber strip that goes between door card and the glass on the inside. If in good condition

Got it?

Mate, I'm looking for the driver side rubber strip that goes between door card and the glass on the inside. If in good condition

Got it?

Do you mean the felt bit that is attached to the top of the door trim?

any updates mate? have you got this trim part?

Hey mate, ive got it but not in good condition. its not straight and wont provide a good seal against the window.

Manual conversion sold.

Drivers headlight and passenger rear light sold.

Boot lid and rear bar sold.

Still got plenty here.

Also have R32 RB20 ABS Tailshaft available $100

Hybrid (i think) front mount cooler $60

  • 2 weeks later...

Interested in the:

Stock Seats

Clear indicator

Glove box (I hope this is the same as 4-doors)

Stereo surround

AC/Climate control

DIN brackets if you happen to have them

pick up SE burbs.

Interested in the:

Stock Seats

Clear indicator

Glove box (I hope this is the same as 4-doors)

Stereo surround

AC/Climate control

DIN brackets if you happen to have them

pick up SE burbs.

PM sent

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • It was roughly 3.5 hours.    car went in around 11:00 and I was done around 2:30 He did the initial runs, install the BC and then Nistune install and tune.  The best part was sitting in the lobby and hearing the skyline on full throttle at the dyno 😂😂
    • Glad it all went smooth. How long did the tuning process take?
    • Yeah that was kind of the same feedback my tuner gave me.  the boost tee is until I can sort out my plan for the electronic boost controller and what I’d get, where I’d mount the dash etc.  I’m happy with this until I can figure it out. Not a big fan of the A-pillar gauges. I’d like to get a clean install of the boost gauge - something digital like GFB.  Something like that might fit neatly where the ashtray is and look clean. I feel like replacing the OEM triple gauge is a bit extreme for a weekender like my skyline. And it’s not making crazy power to need all the additional sensors/gauges. 
    • I'm about to swap my box to Tremec T56 Magnum F & initially thinking of re-using my DCS twin plate (can get it re centred for the bigger spline) but it's been called out the box will be noisy (rattle) as the clutch is unsprung.  So I'm doing as much research as possible. I'm not so worried about holding the power as I'll go the track version which on paper will hold the maybe 1000hp I make. It's the longevity I worry about. DCS told me they don't use a sprung centre as it's just something that can break. The uni clutch has a very complicated sprung centre. Any one had or heard about any issues with it failing? Thanks in advance.
    • Auto is at least 10% (from my real, actual experience with different torque converters and manual on the same setup) ~185rwkw at 11.6psi (peak!) is entirely what one would expect without a FMIC or anything else on the intake, it does bleed off towards the higher RPM so it's what, 9psi there? Note: There is nothing that can be done about this with a manual boost tee. If you want to hold it steady and gain more top end, well - You will need electronic boost control.....
×
×
  • Create New...