Jump to content
SAU Community

Atr43Ss2 With External Gate And Stock Manifold Rb25Det Pics

Badgaz

By Badgaz,
in Engines & Forced Induction

 Share

Recommended Posts

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

yeah off the turbine housing, used a 45mm Turbosmart Hypergate

I've got heaps of photos at home, but check out instagram.com/traklife I've got a few photos here and there.. I'll send you some when I'm back home on my PC

  • Like 1
boostn0199 Grand Master

boostn0199

Posted
Posted

any advice on external gate ? i'm trying to decide between the turbosmart 40mm comp gate and 45mm hypergate....

hypergears own 50mm one is good and cheaper than the others.
Badgaz Experienced

Badgaz

Posted
  • Author
Posted

Cool! well i've ordered the turbo, Stao doesn't have any wastegates at the moment. So i was thinking what size would be best and it made me wonder how to size it properly.. i spoke to a mate of mine said the larger the turbine housing the smaller the gate required and the smaller the housing the larger the gate required. does this sound right.. sort of does to me. there's a $150 difference between a 40mm and 45mm turbosmart gate..

iruvyouskyrine Grand Master

iruvyouskyrine

Posted
Posted

Big turbo big boost = small gate

Big turbo small boost = big gate

Small turbo big boost = small gate

Small turbo small boost = medium gate

That's how I have seen a few people here size gates. *waits for Scotty*

scotty nm35 Grand Master

scotty nm35

Posted
Posted

I run 45mm usually, you can't run too much gate imo, it only helps with top end power after all, but 40 will be fine.

I can get the Turbosmart 45mm cheaper than the 40 at the moment. PM me for price. ;)

  • 2 weeks later...
SargeRX8 Grand Master

SargeRX8

Posted
Posted (edited)

That's an immaculate fit Johnny. Good to see more SS2 turbos feeding air to these motors! Did you get the hot side of your turbo modified to suit the external or did that come from Hypergear as an option? I'm thinking about running an external but I'd like to maintain the standard dump pattern.

Edited by SargeRX8
Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

Thanks man!

I actually got the rear housing sent to scotty_nm35 to modify. I opted for the v band rear because I absolutely hate the nissan 6 bolt flange, always snap bolts lol

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 GTST - 600KW+ RB28/CD009 Build

      By GTSBoy · Posted

      Yucky. Things haven't gotten any better though. Now you have Emerson and Honeywell pushing these massive DCS/Scada things with proprietary hardware. They're not a PLC, they're not a computer, they're a...distibuted PLCish/DCSish monster of thing, that only they can program because they make the barriers to entry for anyone else so fricking high. And their developers are all located in the third/developing world (and India, in case anyone does not include that place in that category) and there are terrible failings of the ESl variety, of the care and common sense variety, and f**king forget about Functional Safety. Not a one of them has any idea what it means to comply with an IEC 615xx series standard.
    • niZmO_Man
      Is r33 gtr steering wheel the same as the gtst?

      By niZmO_Man · Posted

      oi (you're right though)
    • pogman
      Low oil pressure after WOT

      By pogman · Posted

      All of the ECU grounds are to the chassis, the IGN grounds are to the cylinder head and i believe all the OEM body harness are left in original locations, im trying to work out if i can tell if the sensor voltage itself is losing any power to it from the very low ECU voltage. But yeah a manual pressure gauge will help in picking which path to actually chase. Also please dont bully my wiring plan i never designed it to be universally understood hopefully it still can make sense to you, im a wiring virgin.  1 thing i have just noticed the pressure sensor in question relays both pressure and temperature, the temperature reading holds nice and steady despite the low ecu voltage but the pressure reading is the one that jumps around alot so maybe it is really a pressure issue? wiring plan.xlsx
    • Yeetus
      RB25DET Solid lifter conversion

      By Yeetus · Posted

      Gday, Due to not finding much up to date info on this topic I thought I'd make a thread to get peoples latest opinions/recommendations. Background info -  I've got a S1.5 R33 GTST as a fun project car, mainly for street use and occasional drag strip, apart from all the cosmetic things I'll be doing a full rebuild of the engine with forged internals. Since it'll be getting new cams (kelford) and springs to match I thought I might as well get new lifters and valves while I'm at it, the dash says 160k KMs but the engine seems pretty tired, compression measures about 130psi across all cylinders so I'd like to freshen everything up. This is where I'm tempted to just fork out the extra and go solid lifters while it's all apart, aiming for 400-450kw atw with a flex tune. Assuming all supporting mods (oiling, fuel and all bolt ons) with a lightly ported head and turbo to match (yet to make a decision possibly gtx3582r or similar from Hypergear) I've seen the Tomei kits with just the buckets getting around, Supertech sells most things - Supertech High Performance Cam Followers | Trusted Racing Cam Followers Questions -  Has anyone found the Hydraulic lifters to limit them at this power level? Is it usually found that you can just clean the stock lifters and find they work fine?  Does going solid lifters save any headaches/issues with hydraulic lifters in the future? Any recommendations on other things that will need to be replaced, I know I'll need to get the solid profile cams but can you use the same type of valves and springs/retainers and is it recommended to change the guides and stem seals?    Summary -  Basically looking for pros/cons and wanna know if I'll actually need the extra RPMs from solid lifters or it'll just be bragging rights to say it ReVs OvEr 8000 Cheers
    • MBS206
      R32 GTST - 600KW+ RB28/CD009 Build

      By MBS206 · Posted

      Ha ha ha, this stuff they had was installing Toshiba PLCs that were made some time in the 1990s, and they were replacing GEM80 PLCs. To let those two talk (staged upgrade along a ~1.2km long building that was split into 4 sections), was a bunch of WinXP machines running Java gateways... There was no way to put something like ProfiSafe in... Most of the HMI machines were WinXP, with Java program, with a custom button board emulating a keyboard... About the only buttons in the operator stations that went direct to the PLCs was the eStop. There was some interesting design stuff in that place...
×
×
  • Create New...