R32 Gtr Rear Tie Rod End/ball Joints

[SiR_RB]

My outer tie rod end/hicas ball joints or whatever they called are shagged and have play

I've herd replacing just the ball joints are a pain as they are pressed in super tight

I noticed you can buy the tie rod ends complete with the ball joint, would that just be a matter of screwing it off the hicas rod and screwing the new one on? Or should I just leave the existing tie rod end and replace the ball joints?

Basiy after the easiest method of replacing the joints

[GTSBoy]

I think you're missing the point. The hideously tight pressed in ball joint must be broken apart regaredless of how much of the tie rod stuff you are removing. Get underneath your car and have a look.

[SiR_RB]

I thought I could just buy these which house the pressed ball joints in ready which should make it easier?

Not sure

[89CAL]

That looks like the front tie-rod

Rear HICAS part you want looks like this:

EDIT: In Fact the picture you have linked IS the front tie rod (outer) as per this link

Edited September 16, 2014 by 89CAL

[SiR_RB]

Thanks

Il prob get the new ball joints and get my suspension place to install them