Jump to content
SAU Community

Wtb: Adm Rear Number Plate Panel For R32 Gtr.

R32GOJIRA

By R32GOJIRA,
in Wanted to Buy

 Share

Recommended Posts

R32GOJIRA Mentor

R32GOJIRA

Posted
Posted

Hi Guys,

As the title states, I am chasing the panel/s that sits behind the rear number plate of the ADM R32 GTRs and whatever bolts or brackets are necessary.

Does anyone have one, or know of anyone who has one, whether its a reproduction or genuine that isnt ridiculously expensive?

Not fussed on colour as I can have it sprayed.

Cheers

Damo.

  • 4 months later...
  • 1 month later...
GH05T Grand Master

GH05T

Posted
Posted

ADM R32 GTR******************************** that isnt ridiculously expensive?

never seen those two lines work in the same sentence before.

Anfanee Grand Master

Anfanee

Posted
Posted

Isn't the whole thing wider to suit Aus number plates? and will not fit a JDM model?

That's why the rear lights are completely different on ADM models.

GH05T Grand Master

GH05T

Posted
Posted (edited)

i didnt think the lights were a different dimension. they just dont have reverse lights by the plates.
i dare say you would need a whole rear bar though.

Edited by GH05T
R32GOJIRA Mentor

R32GOJIRA

Posted
  • Author
Posted

I wana get rid of the reverse lights and custom make a reverse / indicator light where our normal indicators are out of leds.

Hence why i want that plate to make it look pretty and fit a number plate properly.

  • 6 months later...
R32GOJIRA Mentor

R32GOJIRA

Posted
  • Author
Posted

Guys, I am still chasing one of these.

Does anyone know of any one that has one for sale?

Or even if they would let me borrow one to make a copy or take some measurements and have a look at the brackets so i could fabricate something to suit?

  • 2 weeks later...
  • 1 month later...
R32GOJIRA Mentor

R32GOJIRA

Posted
  • Author
Posted

Still looking for one, or a copy, or if some one will let me take pics of the setup with measurements.

PLEASE :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • PLYNX
      BCNR33/ECR33 Door corner piece replacement

      By PLYNX · Posted

      Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • BourneToLive
      R32 GTR Park lights issue

      By BourneToLive · Posted

      So was there a solution to this problem? I’m having this issue now. 
    • Duncan
      Beers and skylines Fatz style

      By Duncan · Posted

      not expensive, just irreplaceable if you don't go sub 60 at wakie in that thing people will start talking
    • Duncan
      BCNR33/ECR33 Door corner piece replacement

      By Duncan · Posted

      I haven't replaced that, but I have had the doors apart on the r32 a couple of times The door skin will be held on by a combination of clips and bolts, just take it slowly and make sure all the sneaky hidden bolts are out Once the skin is off you should be able to pop that piece off pretty easily, looks like there are only 2 bolts holding it on
×
×
  • Create New...