Jump to content
SAU Community

Recommended Posts

At the risk of sounding like a idiot im having some issues. I have a r33 gtst. Ive just recently replaced the std fuel pump with a walbro255lph and since ive installed it the car has been running like a dog. Its been splattering and just generally running like a pig lol. So i really need some help would the best bet just put the std back in until i get a tune? Or is there something else i can do in the mean time to get it running half normal again

Link to comment
https://www.sau.com.au/forums/topic/448830-fuel-pump-issues/
Share on other sites

Unless your car was tuned to suit a half dead pump putting a walbro in won't make it run bad or need a tune..

Ideally you will have run a direct feed to the battery, but again, if not there won't necessarily make it run like crap.

Yeah its doing my head. So i guess eother put the half dead one in then when i get it tuned put the walbro back in or just dont drive it until i get it tuned lol

Edited by cav33r

So if the direct power souce doesnt work then i can rule out everything else and bascially conclude the pump was a dud

There is also the actual fitting of the pump - location in the cradle/tank, attachment and orientation of the pickup and filter and correct connection of the fuel lines.

Fuel lines have been put back to orignal positions so no real issue there. And it sits in the cardle basically the same as the standard one and put the cradle back in the housing in the tank. So basically exactly how the standard one was is how the walbro is. Ive just emailed the guys i bought it off to see if they will send me a replacment one under their warranty basically to see if it is the pump or somethin else.

And i used the orginal sock off the standard pump because i was looking at the tiny tiny sock they supplied with the pump and basically said yeah no lol. So i put the orignal longer sock back on it

Some workshops can run the new pump in vitro to check flow rate.

I once had a brand new but faulty 044 and the flow rate was barely over 20.

Had to replace it with another 044.

Yes, the faulty one was genuine from Just Jap; but alas, Bosch would not honour the warranty.

They did pull a swifty though. After testing in Melbourne they sent it back in the original box. But it didn't have the texta mark I placed on the faulty one. Caught the buggers out!

Hahaha shifty ones. Well ill see how i go. If i can handle this company to send me a replacement pump and i get it fitted and it still does the same then i have to look deeper into the issue but if it doesnt well it was obviously the pump then. So fingers crossed

Ive just been doing some more reading on what could possibly be causing this problem besides it being a dud pump, ive found that pump i have may not necessarily be a high pressure and if there is any more then 60psi of pump pressure running through it it could cause it to drop in power. I had a look at my fuel reg this morning while on idle and it was showing like 105 psi so obviously under load and boost the fuel pressure is sky rocketing. So my thoughts is if i drop the fuel pressure and get the combined fuel and boost psi under 60 should it then resolve the problem?

No way should you be running 105 psi base.

That's mental.

Like really mental.

You have problems. You can't just drop the pressure on the reg and expect the car to run correctly.

Edited by Ben C34

i know it is i haven had it tuned since ive gotten the car. Previous owner had it tuned to that . Ive just now realized how stupid high it is. I look at it this morning and got a little bit confused.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I agree on doing some better than factory pistons, rods, and oil pump. For anyone using the vehicle on the road, I don't get why everyone wants big cams. The stock cam profile, with some more lift would be mint for road usage. Everyone going big cams and then wondering why it isn't as responsive in traffic, when they've shifted the torque curve upwards an additional 1000RPM. Make torque, at lower RPM. Sure it's not as cool as claiming "500KW" and revving it to 8,0000RPM, but that same torque 2,000RPM earlier... Then you don't need the extremely high end pistons and rods, and blah blah blah.
    • Personal experience. Those f**kers burn. And are actually a PITA to put out. Next time I walk down the back, I'll snap a photo of what the inside of the bonnet looks like when that thing ignites. PS, powder fire extinguishers are useless on that stuff too as it's fibrous and when it ignites, it starts to pull apart. And you end up just blowing powder through a sieve effectively.   Like the big thing is, if it's fire resistant, it's job is to stop what burning? The METAL above it? It's just to try keep heat off the bonnet paint work.
    • Oh man, sorry, $60.00000000... 😛
    • That's more or less what he meant. What it really means is that you do not have to go full crazy on the build. Don't need the best oil pump, expensive rods & pistons, big cams, etc. You can upgrade whatever you want instead of using stock level items, but you don't have to. Having said that - any time an RB is opened up, if anything is getting replaced, I think the opportunity should be taken to do all the sensible upgrades. Pistons, rods, pump, etc.
    • February update 🙂 We managed to get the very last 1/18th "Extra Scale" cars stock available from bookstores in Kyoto. These are actually the last ones and will not be restocked again! Hachette Collections Japan have not decided on a release date for these or other models in the series, so for the time being these are all there are available new.  These are showing up on Yahoo auctions at inflated prices already (especially the Celica and NSX) so get yours now at a very reasonable price before they disappear! Stock quantities: NA1 Honda NSX - 1 left: https://www.oemsoko.co.jp/products/1-18-extra-scale-1990-na1-honda-nsx 1973 Toyota Celica LB 2000GT - 2 left: https://www.oemsoko.co.jp/products/1-18-extra-scale-1973-toyota-celica-lb-2000gt 1968 Mazda Cosmo Sport - 2 left: https://www.oemsoko.co.jp/products/1-18-extra-scale-1968-mazda-cosmo-sport 1970 KPGC10 Nissan Skyline 2000GT-R - 2 left: https://www.oemsoko.co.jp/products/1-18-extra-scale-1970-kpgc10-nissan-skyline-2000gt-r
×
×
  • Create New...