Jump to content
SAU Community

Recommended Posts

Hi All,

I am in need of new tyres.

I have a V35 sedan, but came with Coupe 18in rims on it when I bought it. it currently has 245/45 tyres on the rear and 225/45 on the front, which seems to be standard on the Coupe.

I am thinking of going with 245/45 tyres all round. However, I am worried about the fronts touching the guard.

I had to roll the rear guards slightly after fitting 350Z springs and having the rear camber brought back into spec, which kicked the top of the wheel out slightly.

The fronts are fine with 225 tyres, but the camber isn't adjustable, so they have some negative camber with the 350z springs.

Has anyone tried 245/45 tyres on the front of a sedan with 18x8 +30 rims? If so, did you have any issues with them touching the guards?

Edited by sonicii
Link to comment
https://www.sau.com.au/forums/topic/448958-tyres-for-v35-sedan-with-coupe-rims/
Share on other sites

I also have a set of 18inch coupe rims which I use for motor sport with my sedan. Years ago a mate had 245/45r18 all round without any problems. However he like me has std springs and ride height.

Simplest way to tell is to temporarily rotate your wheels front to back for a day and find out. Rims are not identical front to back but are very close. Don't try any fast cornering just some low speed full lock turns to test for touching the guards,

Simplest way to tell is to temporarily rotate your wheels front to back for a day and find out. Rims are not identical front to back but are very close. Don't try any fast cornering just some low speed full lock turns to test for touching the guards,

Good idea.. thanks. Not sure why I didn't think of that!!

Do you know what the difference is with the rims? I have had them both off and the only difference I can find is the stamp 'rear' and 'front' in the casting. they are all 18x8 +30. I just assumed that the stamps were due to the different standard tyre sizes front-rear.

You are correct in that both front and rear rims are stamped 18x8 and +30. So it would seem same size and offset. However they are also stamped front and rear as well making you think there must be some difference.

If you search the topic on G35 driver you can find a few ideas as to what this could be. One guy claims it is just to ensure that "knuckle heads" don't try and rotate the skinnier 225 tires to the rear. Another claims there is some sort of stud/projection on the wheel mounting plate that prevents the rear wheel from being fitted to the front. He claims if you remove the stud it will mount.

I personally can't say I have seen these studs on my rear wheels but haven't as yet tried to fit them to the front. Will try next time I swap my 17inch std rims for the coupe ones.

It is probably just to remind people they are not 'front to rear rotatable' I am guessing, as you also suggested in your last post

Ok, so I swapped the front and rears over and all is fine.. not rubbing under hard cornering, even at full lock.

VDC had a spak with smaller tyres on the rear. It doesn't have a problem with the smaller tyres on the front though, but that isn't really relevant as no-one is going to run smaller rear tyres normally.

Also put the rear and front rims side by side and had a good look at the differences. I found a different shape with the mounting surface as per the pictures below.

But there is nothing on the hubs that prevent either rim fitting anyway. That may be because I have a sedan which normally comes with the same size tyres all round, so there might be something on the coupe that is relevant to these different shapes

post-84647-0-23930900-1411880481_thumb.jpg

post-84647-0-59878700-1411880526_thumb.jpg

Interesting. I had never noticed those differences you point out. Glad to hear they do not rub the guards which is of course what really matters.

All good for your new 245's all round.

Pity you weren't in Brisbane as I have talked Costco into a great discount price on Michelin Pilot Super Sport in that size.

Yeah, that is my next choice... what tyres to go with.. This car is my daily, so I don't need high performance tyres, some decent quality mid-range is what I am after... I currently have KU36s on the front, so the noise from them is driving me insane.. so quite tyres are high on the priority list.

Fair enough if you don't need UHP tyres. For my daily's I also use a Kumho but the KU39's. No where near the noise of the 36's. Not as brilliant in dry grip (few tyres can keep pace with the KU36 in the dry) but a better all-rounder. Considerably better in the wet and better mileage. There are many good brands around, just depends on what you can get locally and for what dollars.

Good luck.

I've read that KU39 aren't as good as the old KU31. That was enough for me to try other brands (Falken FK452, Dunlop SP Sport Maxx; cheap via Tempe Tyres).

The Michelins would be the bomb though. Perhaps the PS3?

Dunno if the PS3's are normally this price but I got a set of x4 for our daily in 215 45 17 for $636 ($159ea) fitted just recently.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Result of another R35GTR build. Similar specs as above except this is running our bigger size SS-2 profile option. Made similar power except this car runs on Pump 98 fuel. Build specs are: Nissan R35 GTR 2015 model stock engine and box. ETS street intercooler boost logi intercooler piping with tial bov, boost logi turbo inlet pipe ID 1050 injector DW 300C fuel pump Decatted oem down pipe and y pipe& HKS exaust 3inch intake pipe Upgraded actautors HyperGear SS-2 high flow option Final result is 639whp / 477wkws hubs, Ron 93 / P98 fuel at 20psi.  
    • Duncan:- it affect both sides.  Driver side is worse.
    • That seems like a very special issue!  Does it affect both sides? Either way, I would disconnect the driver's side switch and see if it still happens, noting that might require removal of the whole door card which is a bit of a pain (it does on V37 and HY51)  
    • MBS206:- The windows start to slowly open themselves. GTSBoy:- Battery is new since Dec. 
    • I currently have a 2008 370GT Coupe, with the big brakes (Akebeno if I'm correct), and Its coming time to get new pads. Previously, I had a 2003 350GT Coupe with the stock sized brakes, not Brembos. I had custom wheels on it that were pretty open to the brakes, and when I first put the wheels on it, the rims where completely coated with brake dust. A few years after adding the new rims, I needed to change to pads on that car. I didn't do any research, but I told the mechanic of the problem with the brake dust. I also told him I didn't track the car or even drive around the streets harshley. But the dust was an issue. The mechanics changed the pads to a different compound, and the dust was GONE! The other change I noted was that when coming to a complete stop, instead of having to press harder on the pedal as I approached 0kph, I had to actually lift off a little to not come to a hard jerky stop.( My unfounded explanation is they became stickier as they heated by stopping ) Since I got my 370gt with big brakes, I noticed that that as I came closer to stopping, I had to press harder and harder to reach a full stop. I am not talking about hard, just harder. I brought the car in from another state, so when I had a blue slip done, I asked the mechanic what he thought of the brakes, and he thought they were brilliant. The only negative of these pads on the 350GT, was that they squealed when cold. So driving out of a shopping center carpark, it was a little embarrassing, as the brakes squealed, and I am sure people thought that I needed new brakes, when they were actually fresh. I have no idea of what type of compound they were on the 350gt, but whatever it was, I want to get the exact same on my 370GT. They weren't ridiculously expensive, and were replaced at the local JAX (which is no longer open), so I am certain they would be a pretty common big brand, off the shelf type/brand. My current mechanic suggested I need top get the rear pads changed soonish, but he suggested standard Brembo pads. Which I expect to behave the same as the current ones and not like the ones on the 350GT.  I don't think dust will be an issue on the 370GT. With the behaviour I describe above on the 360GT, does anyone have a suggestion of pad material that will act like the change I had done on the 350GT?
×
×
  • Create New...