Return Flow Intercooler

[Adham33]

Hey guys I have a question what's the return flow intercooler for r33 s2 that can handle 380rkws of power???

[Odium]

Honestly with that much power in mind, just get a cross flow and a forward facing plenum.

It'll make life a lot nicer when it comes to working on the car and its a lot simpler (less joins, fewer points of failure)

[Adham33]

Umm so that mean I have to cut a hole and if i did cut a hole is it easy for RWC and cops ???

[Count Grantleyish]

Another thread by you of same topic?

That calls for rajab praising.

[Kinkstaah]

The blitz return FMIC kit will flow that much.

I know this as I have that much and it flows it.

It supposedly fits on a R33 as well as a R34.

[Odium]

I tell you know, if you're going to be getting 380rwkw out of a GTST, it's going to be FAR from legal and you'll have more than a few headaches with police. Effectively turning your car and $10,000 worth of mods into a garage queen.

Just get a crossflow and get Scotty_NM35 to fab you up a pipe which can bend around the bottom of the radiator and pop up into the engine bay... No holes needed.

[Ben C34]

Pretty sure Kinkstaah would disagree with that. Return flow cooler and stock manifold isn't exactly cop magnet material.

[Birds]

A big high flow turbo + E85 + Blitz return flow + factory airbox would keep you under the radar.

In the end police will always be able to find an ECU or injectors or boost controller if they want to look for them, which means anything over 170rwkw has the potential to get you found out. It's all about hiding it as well as you can. If you can keep the engine bay looking stock they won't have reason to look much further. I'd argue that any forward facing plenum is grounds to scrutinise the engine bay, versus a cooler that uses the factory piping.

[Adham33]

But some people say blitz return flow cooler won't handle 380rkws .can only handle 250rwks

[Ben C34]

But some people say blitz return flow cooler won't handle 380rkws .can only handle 250rwks

Refer Kinkstaah s post a few up

[Birds]

But some people say blitz return flow cooler won't handle 380rkws .can only handle 250rwks

Some people don't know

I'm doing 275 with mine on a conservative dyno and I don't think it's at its limits.

[scotty nm35]

If you are in Vic, keep it all looking as stock as possible. You can still make the power using ethanol as a fuel instead of dino 98.

Either a good return flow or custom piping cross flow will do the job, no need for holes to be cut.

[blah_blah]

380+rwkw return flow intercooler brah checking in

Can still push heaps more through mine

[Odium]

Impressive... Which one do you have Tony?

[blah_blah]

Impressive... Which one do you have Tony?

HDI cooler (not sure what, came with the car) with Scotty's return flow bend

[perzn_34]

How can cops find out what ecu or injectors u got???

also i have a blitz return flow for sale if your interested

[Count Grantleyish]

How can cops find out what ecu or injectors u got???

also i have a blitz return flow for sale if your interested

If cops that moody, they'll tear your car apart.

[perzn_34]

If cops that moody, they'll tear your car apart.

don't they need a warrant or something for that? they not really allowed to pull out the interior trims are they?

[Count Grantleyish]

don't they need a warrant or something for that? they not really allowed to pull out the interior trims are they?

Dunno what rock you've been living in, but cops are known to take kick panel out to see what ecu the car has and some cops know what colour injector caps of cars.

Welcome to Victoria.

Plus some cops doesn't even do that and decide to send you a EPA letter and let EPA do the work.

[Birds]

They carry portable tool kits

Screwdriver to pop open / destroy your kick panel and look for ECU

Injectors are pretty obvious if you know the engine and certain Knox people know the standard RB25 colour is dark red/maroon