Jump to content
SAU Community

Recommended Posts

Got some parts i want to get rid of

1) 2x z32 afm. Very little use, bought brand new includes plugs. $150 each

2) R33 gtr extended sump with baffles and oil pick up. hi octane racing copy. Diff/sump from a series 3 gtr $800

3) Catch can. Custom catch can. designed to fit where washer bottle is. Has 2 inlets, breather outlet and a drain back as well. also has a clear tube to indicate oil level. $150

4) Apexi Power FC and controller, fitted to my R33 gtr. Tune that is saved on the computer is from JEM for a forged engine with 2530, cam gears. $650

5) Nitto oil pump. Removed from car due to finding a crack in the block and stripped the whole engine down. $500

6) RB26 Rocker covers. Spares left over $280

7) Custom Dump pipe. Lobster tail welds, very good flow. $150

8) Standard rb26 manifold and cross over pipe. $best offer

9) sard 700cc injectors. very little use maybe 10,000 kms if that. Direct drop in for rb26. $400

Call for more info

Going to post pics later tonight

Location is Newcastle (Mount Hutton), NSW

Andrew

0431088733

Had a lot of enquiries about the oil pump. Oil pump is in perfect condition. removed from engine due to low compression which was caused by a cracked block. No damage was done to block pistons, so no metal fragments have entered the pump even though they are tuff as nails, these pumps are. This go as well as the sump. Items have done less than 10,000kms

post-31739-0-91180500-1412761728_thumb.jpg

post-31739-0-95651000-1412761730_thumb.jpg

post-31739-0-40247100-1412761732_thumb.jpg

post-31739-0-51733900-1412761734_thumb.jpg

post-31739-0-24661700-1412761737_thumb.jpg

post-31739-0-74203000-1412761739_thumb.jpg

post-31739-0-36759900-1412761743_thumb.jpg

post-31739-0-24188300-1412761745_thumb.jpg

post-31739-0-06010900-1412761747_thumb.jpg

post-31739-0-70713900-1412761749_thumb.jpg

  • 3 weeks later...
  • 4 weeks later...
  • 2 weeks later...
  • 11 months later...

Sump sold to me. Excellent seller. Thanks for working with the international shipping. Highly recommended :cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yep, the plan is to do some work in Japan, as I mentioned above possibly keeping it there longer than November 2025. Frankly, I'm not dealing with TopRank ever again and, because my car is no longer with them, I could work with BBL/GY directly👍 But alas, I'm not looking at major bodywork just yet.
    • Yeah I had the probes on the battery terminals.  Sounds good. What reading should I expect to see in a car that runs well? 
    • I went for the scissor lift option, gives a 3ft lift at full lift. I wanted a 2 post but my concrete wasn't deep enough to secure it properly
    • Depending on exactly where that voltage is being measured, that is most likely the battery is f**ked. If the multimeter probes are on the battery's own terminals, then it is f**ked. If they are on the car's terminals, then there is a bad connection. Either are fatal to the attempt to start it. Literally just put it on the 20VDC range, put one probe on the battery's -ve terminal (ideally not the car's terminal) and the other on the block somewhere exposed/metal, like an engine mount bolt head. You can also test the earth lead is steps, so from battery to body earth, body earth to engine connection point, engine connection point to some other spot on the engine, to see if you can isolate where a shit connection actually is.
    • I meant to write 50 originally and then double checked the price and found it was ¥12m (125k) and came to edit it and realized I had accidentally added and extra 0 in the first place lol 
×
×
  • Create New...