Jump to content
SAU Community

Recommended Posts

Is that with a 6766 ?

Would love to see a see a graph to compare with my 6266

That it is mate. Nice turbo. We use to have a T78 on it but decided to try for some more power as Yavuz at Unigroup kept telling us there was something that seemed to be holding the power back.

Put this turbo on and picked up quite a bit of power and about 8mph which is decent

Have you had it down the qaurter mile ido9s? Is it fairly responsive on the 26 or abit laggy?

I have. I cant drive for crap but the car has run 11.00 with a best mph last time out of 138.5. Will be back out this Saturday with some new tyres to see if i can run a 10 with it.

I think its responsive but having said that the car has had big singles on it for years so i am used to it.

If your worried about lag go the 6466. The graphs above show the difference and had i seen that i would have gone the 6466. I ahve never been able to find a direct comparison as good as that one. Its quite eye opening to be honest

Weapon X, so there wasnt much involved with those 2 graphs other than swapping out the turbo and a little bit of timing? Nothing else got changed? What sort of boost was it running and what fuel?

Edited by ido09s

No other changes just a bit of timing maybe 2 degrees. Pulled the 6766 put on the new 6466 . Same day or night I guess it was late. lol

Boost is 24 psi. fuel is 93 oct we have in the USA. But the nonEthanol 93 is going away

  • Like 1

Just did a tune on my rb25/30, 6466 t4 twin gates, 6 boost on e80% and it did 520rwkw on 29psi, 420 on 18psi... Unigroup dyno - stupid amounts of torque and lights up every gear up to 4th on 265 AD08r's response is better than 6766 based on comparisons on supras in the US. Just top end is better on 6766 when its pushed hard.

Just did a tune on my rb25/30, 6466 t4 twin gates, 6 boost on e80% and it did 520rwkw on 29psi, 420 on 18psi... Unigroup dyno - stupid amounts of torque and lights up every gear up to 4th on 265 AD08r's response is better than 6766 based on comparisons on supras in the US. Just top end is better on 6766 when its pushed hard.

graph?

Just did a tune on my rb25/30, 6466 t4 twin gates, 6 boost on e80% and it did 520rwkw on 29psi, 420 on 18psi... Unigroup dyno - stupid amounts of torque and lights up every gear up to 4th on 265 AD08r's response is better than 6766 based on comparisons on supras in the US. Just top end is better on 6766 when its pushed hard.

your not heading back to Unigroup any time soon are you? We made 485rwkw but we stopped at 24psi and would love to see your graph with ours on the same sheet. Only difference is ours is a 26 bottom end

I am quite disappointed to be honest in how ours makes its power. Unfortunately i am limited to 24psi due to standard head studs and with the way ethanol fuel is possibly heading i am not really wanting to disturb the head and stud it as it may not be available in the long run.

I had it back out at the drags a week or so ago and it didnt go any better. 60 foot is down ever so slightly due to new tyres, but it just wont run the first half of the track well. Still runs mid 130's mph wise, but it wont run a decent time. 11.3's pretty much all day

Edited by ido09s
  • 6 months later...

Hope To have a result to post up here in the next month. Built 2.8 stroker with a 6766 1.0 rear on E85. Will be pushing it till the turbo has nothing left.

Did you end up getting it on the dyno legzy?

I see what your saying alot of people like the response and midrange when looking for a turbo, this video is on a rb26 running 22psi it's doesn't seem laggy.

A 6766 on a rb30 would be even better and with more boost [emoji3]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...