Jump to content
SAU Community

Recommended Posts

Police and Channel 7 busted some drag thing in an industrial suburb. over 100 cars involved.

Just got the jist and of whats going on but very large operation mounted on the event.

BIG POINT. didn't see one not one Japanese Import car in the piece doing any burn outs, donuts, not even on the sidelines. 90% of the cars were holdens, saw some Fords and only 1 Rx3 that was very highlighted cause he got arrested for endangering lives when his donuts came too close to spectators.

D**kHead comment of the night with a foooly sik attitude, "Yeah i know this is all dangerous but i'm young man, live hard die hard"

Comments on how bad this makes every performance car club look.

Didn't see the previous motorbike thing that was mentioned in the forums.

thats true about how bad an image like this makes us ALL look bad.

Even if they were holdens and fords, it makes the rest of us look bad simply cos we're young and stereotypically we are all made to act the same.

Bah, holdens and fords... theyre mostly auto*... how much fun can u have in an auto*? :cheers:

*conditions apply

If cops r going t crack down on us (aust/jap car nuts) then where r we going to do it, ok so they the street drags at the motorplex on wenesday night, but what the guys/girls who like to drift and race around? Seeing that u get busted for useing light industil areas. ;)

Yup it was WA cause they said that the WA police force was undertaking this "sting" and if i'm not wrong, WA cops only have juridiction in WA.

My problem with it is the picture that it painted that ANY young person with a performance car partakes in "hoon" activity.

what they were doing was stupid and dangerous, like the nuts right next to people, but im sure most people with performance cars have more brains than that.

i dont think its fair we all have that image on our heads. most of us do take more care, even when we are stupid :headspin:

Did this story end with a bust where the Guy swapped seats with his (big) girlfriend to try and avoid getting busted?

If so it was on TV here about a month ago (smirks to himself and thinks the rumors about sand-gropers may be correct)

If so check some of the comments made in other state forums.

Did this story end with a bust where the Guy swapped seats with his (big) girlfriend to try and avoid getting busted?

If so it was on TV here about a month ago (smirks to himself and thinks the rumors about sand-gropers may be correct)

If so check some of the comments made in other state forums.

There was about 3 guys that swapped spots with their (rather large) gfs that looked hell out of place in the seat.

But the RX3 that busted had this large white PROFOMAZ (can't spell) sticker on the back windshield, looks hell familiar around here pretty sure i've seen it here in perth.

Did this story end with a bust where the Guy swapped seats with his (big) girlfriend to try and avoid getting busted?

If so it was on TV here about a month ago (smirks to himself and thinks the rumors about sand-gropers may be correct)

If so check some of the comments made in other state forums.

There was about 3 guys that swapped spots with their (rather large) gfs that looked hell out of place in the seat.

But the RX3 that busted had this large white PERFOMAZ (can't spell) sticker on the back windshield, looks hell familiar around here pretty sure i've seen it here in perth.

"If cops r going t crack down on us (aust/jap car nuts) then where r we going to do it, ok so they the street drags at the motorplex on wenesday night, but what the guys/girls who like to drift and race around? Seeing that u get busted for useing light industil areas. :rant:"

For racing i would check PPCC forums and see if you get any ideas there and for drift i would check cars more suited to drift

i hope you aint a snitch trying to help in the next bust....

Indeed they did. No mention that it was VIC. Durty mofo's trying to stirr shit as if it was local.

It was the vic lic plates on the cars and the EPA test that gave it away though.

Oh and an edit ... :cheers:

Giving that dude that charge of attempting to cause bodily harm is ridiculous. 5 years jail for a burnout WTF !!!

Damn i am giving up burnouts and going to go steal from peoples house's from now on, much lighter penalties ....... as long as i dont use a car to do it.

the media will always show this sort of thing in the worst light and generalise as much as possible ya know make it sound bad enuf an people will watch an then you can do a follow up an a follow up on the follow up and people will tune in to see it s@#$ happens

Indeed they did. No mention that it was VIC.  Durty mofo's trying to stirr shit as if it was local.  

It was the vic lic plates on the cars and the EPA test that gave it away though.

Damn passing it off as if it was there own gotta be some ethical media law against that because isn't our 6.30pm current affairs programs supposed to deal with our local issues?

Hey how about we go to Current Affair and complain about the story on there and how defaming and biased it is against us. That should go down real well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Unfortunately haven’t taken pics yet after it was finished. All the edges are hemmed nicely, just had to cut holes for the gear shifter and seat bolts and seat belt bolts in the rear. The molds seem like they’re done with steam and a layer of glue on the underside to hold a bit of shape but still soft enough that it’s a good fit when it’s all pressed down.
    • When's the rear mounted turbo kit coming? Needs dose and V8 chop idle lol.
    • I was very unimpressed with how the car came up from the A pillar forward, before I hit things (twice). It all has to go. It had to go, but now it has to go... more. So we finally found the very first Shennanigans with the entirely perfectly setup engine that had no problems being pulled apart to improve on 'was perfectly fine'. Cam bearings looked a bit... stock. Which isn't entirely bad given they were stock and this is a ~20 year old engine. So new cam bearings are on the way because it's somewhat difficult to get to this stage to do it later, and it will trash the block. It was quite unusual that it wasn't done when the perfectly new-looking VCM cam was originally installed by [unknown] What IS unusual is the cam that was installed there was advanced SIX degrees. As to why there is no way to know.. however it could have been @Dose Pipe Sutututu's mate who wanted a larger cam sound but also wanted it to come on earlier to be more usable. This is my dyno sheet with the previous setup - This cam is not supposed to peak until 7000+ RPM, according to VCM. This is what lead me down the whole 'my heads/intake setup is running out of puff and can't support the cam' line of thinking to begin with. Anyway too late now - New cam is in! It could be rather funny if this smaller cam acts like a larger cam because it isn't advanced six degrees. In the spirit of everything is working amazingly - the COMP cam required no dialling in whatsoever. It was about 0.5 degrees advanced, which seems pretty bang on. Any adjustment either way would be further out. I'm told as a chain breaks in it ends up regarding back about 0.5 a degree as the chain breaks in, making it bang on. In the spirit of everything was previously working amazingly - The timing gear that was taken out turned out to be was an N-Motion double timing chain kit, with adjustable cam gear (which is how it was 6 degrees advanced) and all looks entirely perfectly new. It also had a Torrington bearing, which was one of the reasons I ended up getting the Cloyes kit which they used in the C5R 24 hour racecar - Because I couldn't confirm what was in the engine when talking to Tony Mamo. I did believe however it was a Double chain kit of some kind... but found no supporting documentation or evidence for it.
    • I recently did this to my R33 with the full set from Car Mats Direct, they can't do the vinyl anymore that's advertised on the website due to a supplier issue so I ended up with the Black Loop Pile which looks great. I went all out with rubber sound deadening sheets from Repco and also added the sound deadening foam layer option with the carpet. Makes a world of difference and got rid of all the weird smells in the 29 year old interior. It was a bit of work but I'd 100% recommend it, Car Mats Direct had awesome customer service and quick postage. Replaced my seats with some sporty ones from Autotechnia while I was at it, feels like a new car.
×
×
  • Create New...