Jump to content
SAU Community

H K S Suspension With A Host Of Question Marks - R32 G T R

GTR-N1
 Share

Recommended Posts

GTR-N1 Grand Master

GTR-N1

Posted
Posted

$100 buys you HKS Suspension from my car that I've never driven. Isn't that a puzzle?

Terry-60_zps12df8cfc.jpg

My BNR32 is still going through compliance and I've never driven her. This suspension has now been replaced.

Terry-64_zpse11794a5.jpg

So this set is a bit of a lucky - or unlucky dip. These could be worth a lot. But if they're 20 yrs old, they could be worth very little. Treasure or Trash?

Terry-63_zps49feb4b1.jpg

Yes, there's been surface rust through the car sitting outside.

Terry-62_zps741a5051.jpg

I can't detect leaks. The wetness is purely from WD40. Rubber boots are in good nick.

Terry-61_zpscacd69f7.jpg

The compliance centre said that the car rides fine without cap slap. Progressive springs helped. Probably for street, but not sure about track wk.

Terry-36_zpsc2e1370c.jpg

This is how the car sits with them > tyre wear has been even across the tread.

Pick up from Lower Blue Mtns thanks.

Initialdennis Collaborator

Initialdennis

Posted
Posted

They look like their in pretty good nick Terry my mate had the same set in an S13 and I'm pretty sure those are rebuildable and are the hypermax D if I didn't have my teins I woulda taken a gamble on these hehehe lucky dip indeed !

GTR-N1 Grand Master

GTR-N1

Posted
  • Author
Posted

BARGAIN IF YOU HAVE A R32 GTR SOMEONE BUY IT NOW BEFORE I USE IT TO MAKE A COFFEE TABLE

Wut? No excuse for breaking dropped china hehe

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Stagea Front CV Axle Question

      By Duncan · Posted

      I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • soviet_merlin
      Stagea Front CV Axle Question

      By soviet_merlin · Posted

      One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • S1_C34
      Stagea Front CV Axle Question

      By S1_C34 · Posted

      I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • TurboTapin
      CD009 RB Conversion

      By TurboTapin · Posted

      Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Nightmare_mistress_R33
      CD009 RB Conversion

      By Nightmare_mistress_R33 · Posted

      Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...