Jump to content
SAU Community

Recommended Posts

I currently have a open diff and want to put a LSD in. I have a r32 with a 25det neo in it. What are your thoughts on this diff? i can get one for a good price. Heard they a good option if wanting better acceleration. But will it be too much for everyday driving

Link to comment
https://www.sau.com.au/forums/topic/449846-thoughts-on-r200-lsd-46-ratio/
Share on other sites

I've had 4.6's in my NA R32 for a year now which is daily driven and occasionally drifted. I wouldn't have any bad feedback for them.

I would be inclined to keep my 4.6's if I went turbo as well.

Std R32 GTSt is 4.3:1. Auto and manual are two different gear tooth counts that come out to 2 different but very close versions of 3.2 IIRC. Doesn't matter, it's all same same anyway.

Std R33 manual is 4.11. Autos are 4.08 I think. Again, close enough.

For RB20 turbo 4.3 is pretty good. 4.11 is perhaps a bit too tall although it might make 2nd gear a bit nicer. I spent most of my RB20 time with an RB25 NA gearbox, which has slightly different ratios that I found to be better than std RB20DET box ratios, so my memory of 2nd gear in RB20s is clouded by that.

4.6 would be far too short for a turbo. You need at least some load on the engine to make it make boost. 4.6 would be fine for a torqueless NA 20 though. They need all the help they can get for the rice custard skinning tasks that they get put to.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That ring thing is interesting how it's holding everything together 
    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Damn... Not the feedback I want to hear.
×
×
  • Create New...