Jump to content
SAU Community

Error Fo, Cd Stuck, Fitted With Aftermarket Screen That Does Not Display Anything?

timw

By timw,
in V Series (V35, V36, V37 & Infiniti)

 Share

Recommended Posts

timw Contributor

timw

Posted
Posted

Hello SAU

Just got my 350gt, love it!

Only problem is that there is the Error FO being displayed and a CD is stuck. An aftermarket mounted screen is where the pop-up one use to be (came like this from Japan) but it does not turn on or display anything, aircon and climate work fine so far, not too concerned that the CD player does not work as there is another aftermarket one been fitted where the DVD player was on the left.

Would anyone have any idea as to why screen is not working, and how difficult these cars are to open it up and have a look?

Much appreciated. :):action-smiley-069::yes::domokun:

Nightcrawler Grand Master

Nightcrawler

Posted
Posted

You answered your own question. Removing the oem DVD player on the left disables any funtionality your screen once had. And messing around with the can-bus system is a VERY bad idea.

AsM Rising Star

AsM

Posted
Posted

Im guessing you didnt have the factory navi option in the car and it came with an aftermarket screen/dvd navigation(like a panasonic strada for example) where the screen is mounted and the dvd drive (for nav and media is put in the empty smaller glove box) if it isn't factory then you wont be messing with the can-bus i reckon...but making that aftermarket screen to work is another matter all together...take it to Chris Rogers who posted above.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • kevboost7
      Magnetic Drain Plug Snapped in Half

      By kevboost7 路 Posted

      Update: I got the magnet out. I bought 3 different flexible magnetic reach tools, but none of them worked. The magnet on the tip was all less than 2lbs of force, so i had to buy a special cylindrical magnet that had a pull force of 9lbs.  The magnet finally came in the mail yesterday, so i got under the car to get to work. The super strong magnet isn't that long, so i only have about 1 finger pinch lengths to hold it. I was so scared when i was going in the hole, that the 9lb magnet would just fly away inside the oil pan never to be seen again, but i had my butt cheeks clenched and finger gripped on that thing so tight, i managed to get it to suck the other magnet out.  It was a victory for me last night.         
    • MBS206
      New fix for low tyre pressure from bmw

      By MBS206 路 Posted

      Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • sunsetR33
      Anyone know this frontpipe?

      By sunsetR33 路 Posted

      Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • dbm7
      New fix for low tyre pressure from bmw

      By dbm7 路 Posted

      Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 馃槂
    • joshuaho96
      Anyone know this frontpipe?

      By joshuaho96 路 Posted

      You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
脳
脳
  • Create New...