Jump to content
SAU Community

Recommended Posts

Hey folks,

I noticed on the track that the back end of my R33 gtst feels a bight 'light'. What I mean by that is that if im coming down the straight doing around 160-170kms the back feels a bit bouncy and unstable. I've added a bit of weigh in the boot which seemed to help a bit.

Any idea what could be causing this? My guess is that my suspension is simply not cutting it on the track. I currently have JIC height adjustable coilovers but will be considering upgrading when I have the money. Other suspension components (arms etc) are also stock. I lowered the car but dont want to go much lower as it seems to be at good height.

If you guys have any thoughts please let me know.

Cheers

Amir

Link to comment
https://www.sau.com.au/forums/topic/450107-back-end-feels-light/
Share on other sites

Don't put weight in the back to try to counter bad suspension setup. That's a terrible idea.

Hard to know exactly what is wrong - too many variables. Could be poor alignment (toe), poor damping, slop in bushes, tyres themselves. It could even be the front end causing problems at the back (mismatch, poor alignment etc.)

How do you know it's at a good height? Just from looking at it, or because of the amount of travel (bump and droop) you have available? How has the ride height affected geometry? Are the dampers in good condition? (ie did you buy them second hand?)

Best advice is to take it to a suspension place (preferably one who understands track cars) and check out what you have (bushes, alignment, shock tests etc.). This might give you an insight into what's going on

Cheers guys. I think it is too stiff. I got alignment done by Wheels World - Peter races in Targa etc and is quite knowlegable. He gave the thumbs up for ride height and tried to do the best allignment with the stock components. I agree that adding weight is silly in this instance but I did it to test for any differences.

I am looking for new coilovers and other suspension bits to allow for adjustments so we'll see what happens. Meanwhile its good to get some input so cheers.

Got any ideas on the spring rates involved? Which track? Is that straight smooth or does it have any low or high frequency bumps in/on it?

Springs and dampers need to be matched to tune them to a particular frequency. Race cars get stiff springs in order to limit body roll and to make one part of the suspension (the springs) suited to high frequency inputs. That's because when going fast the input of bumps and the transitions caused by changing directions are short and sharp. When running stiff springs, the dampers then have to be matched so that the system isn't horribly underdamped at the frequencies likely to be experienced. Horrible overdamping is also to be avoided, but probably not as bad as underdamping. BUT......one thing that can happen and is spectactularly funny to see is when the rebound damping on a suspension is so high relative to the spring rate that the car will jack itself downward whilst driving around. Each bump compresses the spring, but the damper doesn't allow the suspension to re-extend. A mate of mine when I was a kid had a 116 ALFA with Koni Yellows wound to max stiffness (rebound adjustment only on these things) and stock torsion bars and rear springs. It would arrive into the carpark at work at lo-rider height and over a period of 5 minutes would raise itself back up to normal sky high 116 chassis height. It made it an awful harsh billy cart to drive around in. The suspension was too soft everywhere except in rebound damping, and so when it became compressed, it became too hard everywhere, with no bump travel.

Worth considering both aspects of the above with ref your car. Maybe the springs have been changed on those coilovers, either to higher or lower rates, leading to one or the other problem.

Edited by GTSBoy

Cheers for the info mate. The straight Im talking about is quite smooth and doesnt really have bumps - but I seem to feel anything I go over as Im guessing the spring rate is too stiff. I'm not sure what the spring rate is but I can tell you it is very stiff - too stiff. I will look into what you said mate, its great info. I dont think there's much I can do till I get new suspension. Or is there?....

Are you still running HICAS? If so, gave you checked your HICAS ball joints? For track use you probably want to ditch HICAS anyway so a lock bar or an eliminator kit might help.

EDIT: Also you might just need more aero. Years ago at Sandown I felt the car getting really light in the rear at the top of hill near the end of the back straight at ~190 clicks, not a nice feeling...

Edited by V28VX37

Are you still running HICAS? If so, gave you checked your HICAS ball joints? For track use you probably want to ditch HICAS anyway so a lock bar or an eliminator kit might help.

EDIT: Also you might just need more aero. Years ago at Sandown I felt the car getting really light in the rear at the top of hill near the end of the back straight at ~190 clicks, not a nice feeling...

no HICAS mate, got the lock bar on. I was also considering aero, maybe a decent rear wing to give it some down force. But for now I think sorting out the suspension is the main priority. And you're right, its not a nice feeling at all. I find myself wanting to come off the gas as Im afraid the rear end will kick out and send me into the wall at 170+ Ks an hour.

Cheers for the input

Amir

Lock bar doesn't prevent the outer tie rod ends from allowing slop. Worth a look. But HICAS problems are more likely to make a car feel left-right unsettled than up-down unsettled. Should be relatively easy to tell the difference at 160+.

Its an up and down rather than side-to-side movement.

Two Zimbabwe cents on flogged out rear struts.

uhhh what now?

Nizmo man made a very small bet that the rear dampers are stuffed. This is certainly a possibility. I didn't go there in initially talking about your problems because I was willing to assume that if you had HSD coilovers then you'd probably know their condition. If that assumption is not valid......

Edited by GTSBoy

I see I see. Yes they could be stuffed. No, Im not 100% sure of condition. Will get in the garage over the next few days to do bits and pieces so will have a look. Anything in particular I should look for? Leaking oil etc?

Cheers

Bahahaha.

Man, you said you have old JIC coilovers. They are usually pretty stiff (running 8+ kg/mm spring rates), so they may be what GTSBoy said in post #2. Coupled that with old, worn dampers, you'd get that bouncy feeling.

Get some MCA suspension ;).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Which model Maxima? This is good knowledge to have.
    • I'm with GTS, that's not an actual overheat issue. That's an electrical issue.
    • So, it's clearly an electrical problem. Either with the gauge itself, or the sender. It appears to be voltage sensitive (ie, alternator output affects the reading.
    • Yes, at this stage of SAU threads, I  automatically assume that anyone here knows that everything depends on each and every setup and its choice of parts and what an individual wants from the setup. I think your misunderstanding what I've said, I'm not saying your curve will move to the right.. I'm stating the opposite; that my setup has a much larger turbo than my last one, my current exhaust manifold runners are 2-3x longer than the last one, the intercooler is longer and thicker (hks 103mm thick), the itbs are now oversized from 45mm up to 49mm, and the plenum is now a larger Nismo plenum that's been port matched. As a result, I'm making more power, torque and boost 1000rpm earlier than my last setup. My curve moved left, in a big way. You guys with 800-1000+hp turbos should be considering hks v-cam or the other Japanese company Sakura who makes RB25 Neo vct adaptor kits for RB26's. they all make more power / boost / torque far earlier and higher peak numbers. Dahtone Racing modifies the Hks v-cam systems to his own specs and he also developed the worlds first and best dbw individual throttle body kits, to complement his V-cam. Every single car is 800-1200+hp and they all produce huge gains in response and peak power. 
    • I have a 2008 Skyline 370gt with about 160,000 km on the clock currently. A while ago, I noticed the temp gauge would start climbing but it comes down when I give it some throttle. I took it into the shops. The technicians comments are transcripted below. Reported they couldn't find anything wrong with the vehicle mechanically and they pressure tested the cooling system. Funnily enough, the technician commented that the temperature dropped back down when the car is stationary but this is when I'd notice the temp gauge to be climbing. Just wondering if anyone else experienced anything similar to enlighten me? Cos at the onset, the temps were going up one tick and then comes back down when I step on it. Now, the temps are climbing all the way to the top of the gauge, and it's making me very nervous lol. It also doesn't come down to the neutral position anymore. PS I do have a small exhaust leak near the drivers side caused by when I got f**ked by a really steep driveway at a mall I never visited before. Not sure if this would affect the sensor. Technician comments: Check and verify Fan/Cooling system - ALL OK max 106*C and fans operating at 100% Cools down right away. Checked Fan Operation - 55%@101*C, 85% @ 104*C and 100% @ 105*C Vehicle did not exceed these temperatures with max load. Temperature recovered back to 99*C after fan operation while vehicle Stationary.
×
×
  • Create New...