Jump to content
SAU Community

whos in townsville its time to get it rockin


AZZA
 Share

Recommended Posts

Hi all i have been in the vill for 4 yrs now but until recently didnt own a skyline. In saying so i have recently joined this forum site and was wandering who is in the vill.

As although there are plenty of skylines owners here i dont know any of them.

I was hoping to get something organised, or get a group of enthusiest's together to liven up the place, or if thats already going then who should i contact to let the good times flow. :D

Link to comment
Share on other sites

I have just moved up from brisvegas. Would be great to get something organised. Have a few good events in brissie but have not heard of much up here.

Sounds good mate will have to try to get something going, i dont know how successful we will be, but i know you only have to pay about $20 to take your car down the 1/4 mile when its running. how about we arganise that as our first event. Or theres always the possibility of a roud run.

Link to comment
Share on other sites

I used to live up there , there are some nice new straight roads on the way to Charters if you wana test your speed , but yeah if you want to cruise not much else but Paluma

Link to comment
Share on other sites

  • 3 months later...

Hey guys, i used to live in tsv, and will be back again at the end of the year. I would also like to find someone in tsv or cairns region that has a 4 door R34 for a wedding car around middle of next year. Unless someone has one for sale ????

Also I'm a member of a good car club that does cruises every 2 weeks. "Pulse" (www.pulsemotorsports.net.tc)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
    • You can just get the injector bosses, which allows top feeds to fit. He can use the same injectors without issue, like these (another option): https://rocketindustries.com.au/af59-2210-rb25-fuel-injector-inserts     The Racework ones look a bit better: https://www.nzefi.com/product/raceworks-lower-injector-mounting-boss-kit-for-r33-rb25det-s14-s15-sr20det/   You could also just get a similar kit like the Radium one by Plazmaman: https://plazmaman.com/product/nissan-rb25det-r33-billet-fuel-rail/?srsltid=AfmBOoogfYq49X0fu2Wdbf8yOf6zt9egyPAif_gn3Qr3G8hzAphhTgOkO70  
×
×
  • Create New...