Jump to content
SAU Community

Worst Modifying Experience


Nismo 3.2ish
 Share

Recommended Posts

Haha yeah, I'm all for having a laugh at myself but there has to be a line in the sand at what's funny or not and that crossed it I think

Well he does drive two really fast cars and a silly fast bike so he might be compensating for something :/:D

You have to be careful what you write, you never know WHO will see it, haha :woot:

If that's to case I think I need a few more really fast cars and a couple of big Bikes :yes::yes:

Link to comment
Share on other sites

Experience Peter, I was sitting in a HQ ute while one mate was filling up and the numbnut next to me decided to play with a lighter just rolling the wheel on the flint

It ignigted the fumes in the cabin (Boom!) and lit up the filler neck. The attendant refused to come out with the extinguisher.

So I went back over after about 30 seconds and put the cap back on which extinguished the flame.

(Only the fumes were burning from the filler neck.)

We all lost eyebrows, some hair and a few years.

Farkin idiot

Sorry no vid ...

Link to comment
Share on other sites

Fark, you blokes were lucky, it does not take much to cause what could have been a lot worse.

I had a 1936 Dodge when I was a kid, had just filled it up and was going like a DH , lost it and wrapped it around a light post, bent it in half , we all got out OK, well sort of OK. Petrol all over the place and my mate lit a smoke, everyone shit and he threw it on the ground, yes into the petrol and it went out, windy night no fumes I guess but it scared the crap out of me :nuke:

Link to comment
Share on other sites

Yer thought I would go to my local racecraft engineer to get some end links made for my sway bar. I gave him the instructions & measures. With rose joint ends , a short and long extensions for a soft and hard setting. Left & right handed threads with matching locking nuts and tapped spacers. You get the picture, and a price tag to match. Only to find out later none of my measurements even came close to working . Engineer says to me try these, a male and female rosejoint screwed together 40 bucks.

  • Like 1
Link to comment
Share on other sites

release bowser handle (natural reaction) and close lid (unnatural reaction) when fuel neck catches alight

maybe difficult to comprehend if first time and/or fear sets in

Man i wish i knew that, at first i thought the whole servo was going to blow up. But 2 seconds after I didn’t care.

I was more worried with saving my car then anything, i understand the servo attendant did not want to help but heck i just wanted my car. He could have at least given me the key to the fire exinguher box, i asked him like 6 times and was yelling at him towards the end.

Even the firemen said what the hell why was there no key in the box as that’s not compliant by fire safety standards. Also it was blocked by the servo bin that they have were the water bucket ect is.

They now have a key in the box, the break glass section is removed so even quicker access and no obstructions, yet they still claim no fault at all.

It took him like 2 min to hit the fuel cut emergency button when i ran in and told him there was a fire, he didn’t believe me.

The funny thing about the fuel vapours is. The servo was only renovated 2 weeks prior, it was the first service station in Aus to have this new technology installed that has a vacuum in the nozzles to suck out any fuel vapour.

I remember that for next time and I will have my own extinugher in the car.

Link to comment
Share on other sites

I remember seeing the video of this, bought a tear to my eye watching it :(

Reading this it reads like you think the guys building did something that cause it ?

Yes and no, two different mechanics built the car and put it all together. Then a separate tuner.

I had also taken it too another two mechanics locally to get a few small things fixed up, i.e. catch and BOV issues and they never picked up on anything

I had also filled up about 5 times prior to this time so I was not expecting it

Link to comment
Share on other sites

My worst modifying experience would be when i was being bloody ignorant by using only a scissor jack to hold up the car while changing my brake pads. The jack snapped and the car plummeted onto the rotors, luckily my foot wasnt under the car and my expensive brembos didnt take a hit. Since that day i bought 2000KG axel stands and 1800KG hydraulic jack as well as watching countless number of youtube vidz on how to properly jack up a car.

Link to comment
Share on other sites

Throw a wheel under the car, under the sump or something. Will stop the car from Crushing you if it falls. I have had a car snap a jack as well. Always have something as a failsafe.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • So next year I am looking at upgrading from my VE SS bomadore ute to something more refined.  I wanted to stick with a V8 but not anything German or Australian, either a coupe or a sedan. So if I wanted anything newish that limited my options to either the Lexus RCF which I quite like. But with the price they demand and a kid on the way a 2 door coupe is probably not going to be the best idea. The next best thing would be the ISF but the newest models are 2014 and commanding over 60k and even the older 2008 models in ok condition starting around 35k is kind of bullshit. So I figured if I could not have the noise I could perhaps make do with easy power. Enter the infinity Q50 or Skyline equivalent. The price difference between the 300 and 400hp models seems a bit crazy. Right now there is 300hp Q50 one on carsales from a dealer with 61km for 27k drive away. If I wanted to get a 400hp Red or 400R car the prices seem to start at 43k From my limited research it seems that the only differences are that the 400r/Red Red runs more boost and a more aggressive tune. There are are turbine speed sensors on the turbos. Has 2 pumps for the water to air intercooler. Runs an engine oil cooler. I'm guessing that the exterior trims might look a little more sporty as well. I had a lazy look for upgrades to bridge the gap on z1motorsports They have kits that upgrade the water to air heat exchanger as well as the coolant pump which should give a non Red/400r better intercooling temps than the stock Red/400r. I added an engine oil cooler with a thermostat as well to try and make things as close as possible. Obviously the ECU is going to need a tickle. Having not done much in the way of research they also sell a ECU flashing tool with pre loaded tunes that are supposed to boost the non Red/400R by 100hp which adds 1k USD to the cost. The total cost of the parts @ the current time including shipping and taxes worked out to be $4350 AUD. Personally I would rather get the car tuned on a dyno which would probably add more cost Assuming the worst that you got a workshop to install the new parts I would guess no more than 5 hours would be required in the worst case @ 5 x $150 per hour = $750 So the total cost could be around $5100 So for easy number 5k + 27K = 32k I guess that would leave some change left over to swap out the open diff and fit a LSD Any thoughts?      
    • Right, not sure why I thought it to be a lean spike. It might be fixable with modern card-style hot film MAFs which have some design features to avoid counting reversion flow but I've never tried it myself.
    • I did not realise this, I'll contribute more and earn my stripes and retry later. 
    • I'm only going to hassle you for posting links to images. It's against my policy to click links that could be some nasty payload. Sadly, you need to make 9 more posts before you can just stick the images directly in a post, unless @PranK sees this and bends the rule for you.
    • Hello,new to the group, I bought a R32 from auction recently, wondering if anyone knows the cars history, seems to have the usual go fast bits on it, plan is to do an engine swap- add 2 extra cylinders and 1 extra turbo. https://www.dropbox.com/scl/fi/i4rjmlzubjbwjtguh6f4s/IMG20241011140744.jpg?rlkey=q0lumm251377vknbqktfwrycq&st=7scvwx4e&dl=0 https://www.dropbox.com/scl/fi/ro24qmwzlczzlfsr4y05x/Screenshot_2024-10-10-10-49-23-90_9a2f5bb2149dae94cd1e190effc09b33.jpg?rlkey=oyguh26ttshlf04ccp48odf4v&st=xloae97b&dl=0   New to forums and posting pics, if links don't work, take it easy on me, 42yrs old and I tune carburettors!!  
×
×
  • Create New...