Wtb S1 Awd Radiator And Shroud

[66yostagea]

Must have wide spaced top pegs and be tapped for A/C sensor.

[Dan_J]

i'd say its the same as a r33/r34 not r32

[66yostagea]

I know it is not the same as an R32 caus I have one. Their top mounting pins are closer together and there is no tapping for the A/C control sensor.

I have a radiator marked R34 but it does not have the tapping point for the A/C control. The last one I had delivered from a wrecker was not only 15mm thick core, did not have the tapping point,for the A/C, but the connector for the auto tranny oil line on the passenger side was too far to the left for the stock line to fit. On top of that the top tank leaked,

My original S1 RS4, auto that I imported from Japan in 2006, has a 25mm thick core. That is what I am after to fit to the S1 Dayz.

[sriver killer]

Ive got an R33 one that you can try,