Jump to content
SAU Community

Recommended Posts

RB25DET cylinder head. $2500
Stage 2 port work
Clearance Machined on CNC accurately (not die grinded)
suits all available cam profiles from drop-ins to
to huge 12.5mm lifts if chasing big power numbers.
Acid Cleaned & Skimmed for fitment by Ultra torque Heads Campbelltown.
will suit RB25 or RB30 as oil gallery plugged & tapped instead of permanently welded.
HKS Cams, HKS Step 2 Valve springs, HKS Adjustable Gears.

This Head will suit Turbo charging your RB30 NA engine or
a power upgrade on your RB25 with VCT delete, or use your own VCT cams if you choose.

Combustion Chambers Lightly Polished &
Modified to for faster flame propagation & detonation prevention.

post-29115-0-09139400-1414994992_thumb.jpg

Oil gallery Plugged instead of welded so head can run VCT.

post-29115-0-42801400-1414995021.jpg

Exhaust Ports relieved & pocket ported

post-29115-0-96476000-1414995000.jpg

Intake port casting smoothed & pocket ported

post-29115-0-41788100-1414995014.jpg

Biggest drop-in HKS cams installed prior to cam lift clearance machining.

post-29115-0-01096300-1414995007_thumb.jpg

HKS drop-ins installed after clearance machining, gained extra 3mm.

post-29115-0-60264100-1414995143_thumb.jpg


cost tally;
$1200 port work
$200 Combustion Chamber Modification
$100 Remove External Casting Marks.
$300 CNC Clearance Machining
$400 Head Service
$400 HKS Cams
$250 HKS Adjustable Cam Gears
$50 Drill Tap Oil gallery & supply VCT Plug & grub screw
HKS step 2 Valve Springs $400
spend over $3000.

Link to comment
https://www.sau.com.au/forums/topic/450320-built-rb25-head/
Share on other sites

  • 2 weeks later...
  • 3 weeks later...
  • 1 month later...
  • 1 month later...


  • Similar Content

  • Latest Posts

    • Nope, but they are definitely one of the default choices. Well established.
    • Has anyone used > https://performancecoating.com.au/  
    • Haha actually I did join back then under a different email address,  I couldn't re-activate my account so made a new one! I didn't post much anyway so not missing out on much. Amazing to see how the value of the cars and parts has changed over the years, also ACT section appears to be dead now. 
    • Thanks... It's in pretty good condition overall, probably due to not being drifted/tuned however being a daily driver has taken its toll. Had 100k on the clock when I got it, up to 180k now. Unfortunately it's not 100% dent free, it's got a small dent on FLH side and broken indicator from where I hit a small kangaroo at high speed. If you look at closely at pic #5 you might spot the dodgy trailer light repair my old man and I rigged up as temporary repair! - It's still there due to a combo of needing the car as daily driver and then too lazy/busy to fix properly. I've a couple of other minor accidents accidents as well but nothing major. One required a new front bar and unfortunately the smash repairer ordered the normal gtst one and not the aero bar. Needed the car back asap so just went with it, regretted ever since.
    • I can't believe that anyone is foolish enough to believe that the base maps are for any other purpose than to drive the car up onto the trailer/truck or gently creep it to the dyno. No matter how good they are, they can never be any better than the factory maps**, and only the foolish trust those on a significantly modified setup. **Yeah, yeah. I know there's also the difference between factory maps being fixed to certain injector sizes and MAP/AFM/VE relationships, and the likely aftermarket ECU base maps being better able to handle the sorts of changes that would render a stock ECU dangerous, like different sized injectors. But let's just ignore that for the moment, because the principle is still the same.  
×
×
  • Create New...