Jump to content
SAU Community

Recommended Posts

Trying to find some rims for my car. Specifically a 17x9 +15 (or 22) in a BBS or Rays. There isn't much showing up on Yahoo in Japan and the local importer style sites all are months/years old with apparently no turnover in anything good.

Can anyone suggest somewhere who may have something?

How much are you wanting to spend?

What about a brand new set of ENEKI RPF1s in what ever desired size/offset you like? Would probably come in cheaper then used jap rims too.

Also not sure if there still available but import monster has on their site refurbished 17x9 + 22 gold BBS rims for $2600 they look great.

There were some new Enkei's RPF1? for $1300 ish plus shipping which I would be ok with. First preference is to match what I have 17" titanium CE28's but they dont come up that often. Last time out I bought a pair with tyres in good nick for $750 which in retrospect may have been a bargain.

Problem is because of the fitment thing everyone has 18's and hella flush offsets. 9.5" is the default width now it appears.

  • 1 month later...

If your prepared to go the new Enkei option I'd suggest suggest go to Tire Rack in the USA www.tirerack.com Their the cheapest I've found and they provide good service, either by chat or phone.

For a set of 4 Enkei RPF1, you are looking at about $1,300-$1,400 AUD, including delivery to Australia. Or if you choose a different Enkei wheel you may even get them for a couple of hundred dollars less.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
×
×
  • Create New...