Jump to content
SAU Community

Recommended Posts

Hi there,

I've got a few things I want to clear out of my shed.

R32 passenger side glass window: $50

I bought a door, it came with glass, I didn't want to re-tint my windows so I changed my old glass over.

In very good condition, no scratches, just a little bit dusty but I'll give it a clean.

post-32719-0-90565100-1415404330_thumb.jpg post-32719-0-21815900-1415404579_thumb.jpg

Genuine R32 GTR Nismo strut bar: $80

I bought this strut bar to put on my car but it sits too high so I can't close my bonnet.

This will only fit on R32 GTR as far as I can tell. You are welcome to buy it and try to get it on your GTST but I don't guarantee it will fit.

Condition is ok. Paint is peeling off a little bit as can be seen in the photo. Other than that it is straight and a very solid bar.

post-32719-0-66863700-1415404888_thumb.jpg

2x Nankang 245/45/18 Ultra Sport NS-II: $50 for the pair

Not sure why I got these. I've never used them and they have just sat in storage. Pretty much brand new condition with plenty of tread left.

Good if you want a spare pair of tyres for skids or you can use them on the street.

post-32719-0-42645100-1415404963_thumb.jpg post-32719-0-45968200-1415404967_thumb.jpg post-32719-0-62507100-1415404972_thumb.jpg post-32719-0-24008500-1415404977_thumb.jpg

Stock RB25 turbo with actuator: $30

I replaced this turbo on my car. Was working ok when I took it off the car. Would suit someone wanting a cheap turbo that they can then hi-flow/rebuild. Doesn't seem to have any wiggle in the turbo wheels.

post-32719-0-22540000-1415405187_thumb.jpg post-32719-0-42480400-1415405189_thumb.jpg

3A Racing Black Pod Filter: $20

I bought this with the intention of putting it on my car but never got around to it. Brand new condition, the only time it has come out of its plastic wrapping packaging was today when I took a photo of it.

Has a 3 inch outlet. Plenty of reviews online on how good these are.

post-32719-0-91883500-1415405350_thumb.jpg post-32719-0-28779800-1415405353_thumb.jpg

Gktech Hicas Lock bar for R32: $60

I bought this when I wanted to remove the hicas from my car but I ended up replacing the whole sub-frame with one from an S13 which doesn't use hicas.

Again this is in brand new condition and comes with fittings as well.

post-32719-0-49966200-1415405355_thumb.jpg post-32719-0-59672500-1415405357_thumb.jpg

Genuine Nismo Black Alumide gear shift knob: $50

Suitable for all Nissan cars which uses a 10mm thread. Awesome gear knob to use.

In great condition.

post-32719-0-44243700-1415405359_thumb.jpg post-32719-0-28032200-1415405424_thumb.jpg

Razo leather gear shift knob: $40

In brand new condition. Comes with various thread fittings so will fit pretty much any manual car. Also comes with the stickers showing the gear locations.

post-32719-0-32247800-1415406256_thumb.jpg post-32719-0-00203300-1415406251_thumb.jpg post-32719-0-52585900-1415406253_thumb.jpg

Prices are relatively firm.

I'm happy to post the smaller items at buyers expense. Otherwise pickup can be organised anywhere between Chester Hill, Campsie, North Ryde or the city depending on the day.

Send me a PM or call/SMS my mobile: 0432 595 358.

If you call during the day, I may or may not pick up depending on the time of day and whether I am in meetings or not. Leave me an SMS and I'll get back to you.

Thanks for looking.

Peter

*** UPDATE ***

Tyres are sold. Following items are still available:

R32 passenger side glass window: $50

I bought a door, it came with glass, I didn't want to re-tint my windows so I changed my old glass over.

In very good condition, no scratches, just a little bit dusty but I'll give it a clean.

attachicon.gif2014-11-08 09.17.20.jpg attachicon.gif2014-11-08 09.17.39.jpg

3A Racing Black Pod Filter: $20

I bought this with the intention of putting it on my car but never got around to it. Brand new condition, the only time it has come out of its plastic wrapping packaging was today when I took a photo of it.

Has a 3 inch outlet. Plenty of reviews online on how good these are.

attachicon.gif2014-11-08 09.52.22.jpg attachicon.gif2014-11-08 09.52.51.jpg

Razo leather gear shift knob: $40

In brand new condition. Comes with various thread fittings so will fit pretty much any manual car. Also comes with the stickers showing the gear locations.

attachicon.gif2014-11-08 11.22.25.jpg attachicon.gif2014-11-08 11.21.05.jpg attachicon.gif2014-11-08 11.21.17.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have done a lot of research before posting here and on gtruk forum. couldn't find anything. I have my gauges all part except the needle itself. the needle has a extremely small hole in the center, but the shaft going to the needle is extremely small and appears to have nothing to index it either. doesn't seem strong enough to simple pry or pull without damaging something. Already tried the old spoon trick on a extra triple meter I have from a gtt, but no luck. the center cap comes off easily but the hole in the meter face plate aren't big enough to get over the needle itself. figured this would be my best place to find someone who might have actually removed theirs. wonder if there is some type of small pin press tool to push the pin in while pulling the needle base off.
    • Ok...its taking me long enough to finally do this.  Feck financial security...heart disease will get me soon enough anyway So welcome to the garage..."Clem" Belsil80 has been running a 370Z in Super TT series. So after entering with him in last years Winton 300 i figured I  need my own car. Seems SAU Vic race cars need to be yellow....{tick} Reckon with enough motor i will be able to make up for the lack of talent and stay ahead of the 370Z... but the LS powered S13 and E36s are a ways up the road Aim is to have a car that doesnt stop or turn but has a bit of shed built motor with jam...maybe some cream  First step is getting this ex drift car log booked I am keeping faithful silver car. As the road-club car gets upgrades the race car wil get the sloppy seconds
    • Assuming that they will come off without damage at all.... i would have thought just pull straight up off the spindle with a something or other than can reach underneath. Have you searched for youtube vids of people doing similar on R34s or any other Nissan from the same vintage? They should be the same technique, in all likelihhood.
    • Keeping in mind that sandblasting is really aggressive on softer metals like cast alloy, and you can do damage that you might regret. For trash wheels, not a problem. For wheels with value/scarcity issues, etc.... perhaps a less aggressive media is a better choice?
    • Don't get all high and mighty. Experienced spanner wielders know exactly what effort is required to release an Oof.
×
×
  • Create New...