Jump to content
SAU Community

Recommended Posts

Hey guys

So basically i have put a RB25DET NEO into a R32 GTST
Everything mechanical is done.

I have used the RB25det NEO Loom and ECU

I basically need a guide/help on wiring the Rb25det Neo engine loom to the R32 gtst body loom and to basically get this thing started and running.

Now i have searched everywhere for days found little bits and pieces like this :

The internal wiring is the only hard part. You need to place the wires from the 34 loom into the factory 32 internal loom. This is easy if you know what every wire from the 32 and 34 ecu’s is and what thus each wire in each plug in the 32 and 34 kick panel is. It is easiest (in my opinion) to cut the internal loom plugs off the 34 loom and off the 32 loom where it went onto the main ecu loom, and attach the 32 plugs onto the 34 ecu loom. This way, if you crash your 32 or whatever and want to put the neo into a new 32 all your wiring is done basically. If you do it the other way, you will also need all the corresponding 34 internal plugs from the internal loom. I say do it the first way. It’s your choice.
The only point to really note and emphasise here is this:
The r32 is basic. The 34 had TCS and ABS. Each system in the 34 has it’s own computer ie for the
1. Engine
2. TCS
3. ABS
Each computer works both independently, receiving the signals it needs to and consequently processing them, and together. They all talk to each other. If you remove the ABS computer (or in the 32’s case, it was never there to start with) the engine computer does not see a signal from the ABS computer, so it thinks the car has no brakes. And it won’t go. So you need to trick the ECU into thinking that the TCS and ABS computers are their, functioning properly, and sending a signal so the ecu thinks you have never locked up braking or lost traction whilst driving. The information on how to do this, along with spreadsheets of what every wire in the 32 and 34 kick panels is, the plug layouts, ecu pinouts etc is all available via application in writing

Now it says what to do but not how TO DO IT ?!?!

does anyone have a guide or write up for this?

OR know how to do it

Thanks kindly

Ryan

It's pretty easy. I'll see if I have some pics from when I did mine. There is really not much that needs to be done.

Power and earth come from engine bay. Fuel pump, tacho and some other stuff go into the body loom in passenger footwell.

There is a dedicated guide here in the how to section by the way. Search and Ye shall find.

You will need to Nistune the ECU to get rid of the fault codes and CEL. ABS and TCS are the big problem. Nistune fixes all.

The only way to do a neat job of it is to use the complete R34 loom and add the body connections from R32 into it, rather than the sort of horrible hack and tack approach that has been documented elsewhere.

I wish could give you a nice summary on how to do it, but I sensibly left that part in the hands of people who knew exactly what to do and had the bits to do it with before the swap commenced.

Hmmm okay looks like ill get a nistune after i get it started and see how that goes.

but yeah im wanting to cut the plugs off the R32 gtst loom and use them on the NEO loom, if you do find any information on how to do it please lemme know.

and Josh, did you find any photos ????

thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, does anyone know how I can, or can a moderator remove this advertisement please.  Has been sold a long time ago and would like to remove references. Thanks. 
    • There are adaptors that allow you to delete the booster and use an s15 clutch master cylinder.    if you want to keep the booster they are still available brand new 
    • I visited again today: It would appear they have painted the main body of the car and some parts of some of the panels, so I can say that I now have BMW parts in my car, much to the envy of @Dose Pipe Sutututu It is still covered in dust which is quite the tease but I did look at a few circumspect spots that will be behind bumpers and such and wiped some dust away: After my repeated begging to PLEASE DONT PAINT OVER THE ENGINEERING CERTIFICATE (you have to re-engineer the entire car if they do) I see THIS: Which is great. Excellent job tbh at least to me. A better non dusty example would be the backs of the doors that have been painted: Giving a reasonable contrast between old and new (I know the old isn't clear coated on the inside of doors). The door card will well and truly cover where the old paint is, you can see in the second pic some of the black butyl/whatever shit is sticking the plastic sheet behind the door transfer that has happened since it's clearly been stuck back on. The most maddening thing about this colour is every time I saw it in the wild it looks like another colour, same with photos of many cars with the same colour looking wildly different in every photo anybody ever takes and this is no exception. But stand a little further back and it suddenly looks dark AF. I did tell them when I was discussing which of the 70 million charcoal colours to choose from (a porsche one, a BMW one, or a R32 GTR one etc) that if they just ignored me and chose one at random I would probably never notice. Maybe they did. But the colour is supposed to be B39 (BMW Mineral Gray). Boring I know, but the R34 sedan (to me) really shows off it's boat-ness when you paint it in a bright colour like bayside blue or white or whatever else. I do have a fondness for AR2 Nissan Red, but decided against that because it'll have pretty odd contrast to random bits unpainted (like engine bay, bits of trim etc, and maybe it'll fade). And people will always fkin comment on AR2. Everything remains super dusty. I have tracking numbers for the new heads, as well as some Improved Racing goodies, but they probably will be a next year thing by the time they end up on the car. I did some maths on the heads and I know why nobody goes to this extent in Australia, because it's really not worth it, given I could have just CNC'ed my current heads, bought a FAST102/TB and used my current rocker/spring/cam combination and get a 383 stroker (or stroked a 6.0 GenIV bottom end to 6.6L) built for the same price of just the setup in the mail/on the floor here. Or I could have bought a LS3 and a Drysump system. And then have a complete engine to sell. Oh well
    • We just disconnected the vacuum line if I remember correctly, booster is still there. Is there a rebuild solution for the booster or a different adapter that will work for GTR chassis?
    • Yeah 4wd (boosted) has a recess in the firewall for the booster, and 2wd is flat - the example in the link shows the flat surface. When you deleted the booster, did you just attach the factory slave cylinder directly to the recess in the firewall with no adaption?  
×
×
  • Create New...