Jump to content
SAU Community

Duncan's Race Car - The Most Overdue Build Thread On Sau


Recommended Posts

We paid $31k for ours, 1996 R33 GTS-T with 56000 kays. True M-spec I might add, not a car with add ons after the sale from factory. 

Ha Ha yea Duncan it's very amusing trying to explain to them about their cars, I get much enjoyment. One that always pops up is the Power FC, apparently they are junk, but they still get sold for big dollars.

  • Like 1
On 27/08/2022 at 8:44 AM, Duncan said:

Mate, there would be new skylines owners on these forums from American that weren't even born then...

Lol

I hope some Muuurricaaaannnnnn buys mine. 

I will then never own a Skyline again (I said that last time, and the time before I said I'll never buy a JDM shit box but ended up my 1st R33, now 2nd)

  • Haha 1
On 8/26/2022 at 2:50 PM, Neil said:

Sorry Ben, let me re-phrase that, I would have to be the longest single ownership person of a Skyline on SAU, Invoice date 06/09/2001.

I have you beat, Nov 99. What was the plate Duncan...HUJ-33 or something wasnt it?

462R32_Carpark.jpg

On 8/28/2022 at 11:41 AM, Roy said:

I have you beat, Nov 99. What was the plate Duncan...HUJ-33 or something wasnt it?

462R32_Carpark.jpg

Geez mate, they hadnt much earlier released the R34!

  • 4 weeks later...

Ha, well no progress lately so no updates. Given another upcoming wet summer I've been out on the tractor with the grader blade trying to get some driveway drainage in place, which in itself is an interesting challenge. And once that is done I'll have a few months of weeds to get ahead of for the same reason.

My guess is progress on GTR will be slow until later in the year. Kell is off to Great Tarmac Rally in a couple of weeks with Mel in a shitbox wrx instead.

  • 2 weeks later...

No work worth updating on the race car, dealing with some minor surface rust / underbody / chipped interior paint etc. As they say in racing, its "good from afar, but far from good".  I'm also updating mounts for rally gear in the boot like spare wheel/jack/toolkit.

On the other hand, the 100m of the 1klm of driveways I have done went awesome in the big rain :)20221008_142439.jpg

The rest, not so much.

  • Like 1

I did a fair bit of prep work before the rain and then we got less than expected and spread out so we actually faired really well, you guys got pumped (you are up blue mountains way yeah?) 

We're a bit south of there but same general area. This was the little river behind our place after 50mm of rain (back during the drought it took 150+mm for that)

20221009_082736.jpg20221009_083228.jpg

  • Like 1
  • Sad 1

We had water over our driveway from dam overflowing for the first time ever recently, only a few inches, but it had to fill the dam and overwhelm the overflow first. 

This was because our neighbours dam had blocked/spilled over, then he unblocked it so we had the overflow and the spillage coming at the same time plus the rain. 

The water table is defs full. 

9 hours ago, Duncan said:

No work worth updating on the race car, dealing with some minor surface rust / underbody / chipped interior paint etc. As they say in racing, its "good from afar, but far from good".  I'm also updating mounts for rally gear in the boot like spare wheel/jack/toolkit.

On the other hand, the 100m of the 1klm of driveways I have done went awesome in the big rain :)20221008_142439.jpg

The rest, not so much.

Throw in some side drains on the low side every 50 meters or so

Control scouring with rubble drains, and put in the odd culvert 

I build alot of unsealed roads with work, drainage will keep it open longer, but there is only so much drainage can do

 

erosion-sediment-control-unsealed-roads-field-guide-120410.pdf

Thats f**king awesome, thanks mate. I was just looking at the drains thinking they were going to need some larger rocks to stop erosion in the fast moving/steeper sections too, they are comparably cheap to bring enough of them in.

I've got a grader blade so regular resurfacing is no issue, I do need to bring in a massive amount of roadbase over time if I want to improve the actual surface meaningfully, but it is passable now, even 2wd in the wet

Culverts are a practical issue too....there are 4 places where I could do with them but that is a very expensive job - 2 lengths of pipe, excavator time to dig down, aggregate under them to keep them stable with a proper fall, headwall at both ends and a pit at the entry. For now I've just got a light ditch across the road surface at each location and just fill them back in every now and then.

We did put 2 proper culverts under the main drive - 4 lengths x 600mm pipe...cost about $8k but I've never seen them more than 2/3 full which is a win.

20220129_172959.jpg  Need to do the same under the mid dam road, it goes under all the time

20220129_172632.jpg

Just had the lower dam overflows dug out, looks like they are 2x300mm which is probably not enough for big rain.

All of which will seem like a hell of a waste of time and money in 18 months when the drought returns and we are watching the bushfires roaring across the hills 

  • Haha 2
  • 1 year later...
On 18/10/2022 at 9:15 PM, Roy said:

When does the airstrip go in for the Cessna Bird Dog?

Took me a while to answer that....

Funny thing is, the across the river neighbour did put in an airstrip, built a hanger, and buy a cessna, because strangely they aren't allowed to build a house on the property but there is no problem building an airport terminal :rofl:

They've used in 3 times, once for an attempted landing where they misjudged a little, aborted and missed the trees by so little that new underwear was required. Second time the landing stuck, then a few weeks later the plane left and never returned, so I don't think aircraft noise is going to be an issue.

Funny looking back through the last few posts too, I've spent a heap of time lately redoing the roads  and drains so I guess it is a 2 yearly thing to add to the calendar. Those big drains did overflow in the rain about a month ago so that is pretty disheartening....just a reminder that you can't stop nature I guess.

Uncle Duncan, send me some photos of the creek/drain/culverts, when it's low or dry, and also when it floods if you have any

Do you have an idea of how much water that part of the land and drainage would capture in a heavy fall

Does the whole creek/drain overflow up stream as well as downstream, or are the culverts the bottleneck, or is the water building up past the culverts and stifling the flow, or does the whole road go under

Are the culverts being blocked by dirt or vegetation during the event

A land survey would be handy to see where the upstream water is captured and drains down stream

I can roughly calculate the size of the drain and culverts required and speak to our surveyors and engineers at work to see what options there are

When it comes to culverts and drainage it all comes down to some math to work out what is required 

People often underestimate the size of a culvert/drain

In saying this I won't be back at work for a week or so as I had my right shoulder rebuilt 12 days ago

On 5/6/2024 at 9:40 AM, The Bogan said:

Uncle Duncan, send me some photos of the creek/drain/culverts, when it's low or dry, and also when it floods if you have any

Do you have an idea of how much water that part of the land and drainage would capture in a heavy fall

Does the whole creek/drain overflow up stream as well as downstream, or are the culverts the bottleneck, or is the water building up past the culverts and stifling the flow, or does the whole road go under

Are the culverts being blocked by dirt or vegetation during the event

A land survey would be handy to see where the upstream water is captured and drains down stream

I can roughly calculate the size of the drain and culverts required and speak to our surveyors and engineers at work to see what options there are

When it comes to culverts and drainage it all comes down to some math to work out what is required 

People often underestimate the size of a culvert/drain

In saying this I won't be back at work for a week or so as I had my right shoulder rebuilt 12 days ago

Duncan just needs to start an epic open pit mine, let it store the excess water for him.

Call it a dam and the authorities won't say a word :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A realistic expectattion of how long it has to last also comes down to.... when do you think you will be banned from registering and driving old petrol powered shitters? It's 27 years since that thing was built. It probably rusted out 15 years ago. It was probably repaired and looked OK for another 10. If you do a similarish bodge job now, or perhaps slightly better with some actual rust conversion and glassing, then.... get another 10-15 years out of it, after which you'll only be permitted by the CCP to drive electric cars manufactured in their Shenzen zone anyway. 
    • Let me assume that the concern over a manual ECU is that the NeoDET that you have was an auto and has an auto ECU. That ECU will not be a problem, but you WILL have to Nistune it. And you would have to Nistune it even if you had a manual ECU, because the turbo ECUs will shit the bed if they do not have all the things that they were told they have to have, to be happy. The big one being the TCS CU, which you won't have in your car. Anyway, with an auto ECU (which I have running my originally auto NeoDET in an R32) Nistune allows you to put in a Stagea image which doesn't panic about the absent TCS, and allows you to override a whle bunch of other annoyances that would otherwise see the check engine light on 100% of the time. Also, you can't wind up the power very far on the stock NeoDET ECUs without Nistune, because the boost sensor gets in the way. Nistune allows you to push that problem much further up the dial. Do you even have the boost sensor with the engine? Without it, you are SOL and will need an aftermarket ECU (or to find a sensor somewhere, god knows where). I can't tell you what the wiring loom differences are in a 34. But what Duncan said above needs to be considered. When you say "loom", does that include the transmission loom? Because you will need to swap out the auto tranny loom for the equivalent manual loom, and get rid of the neutral/park start interlock (basically hot wire it).
    • I have had the r3c in for years now, maybe close to 7 years and it has never missed a beat, anyone can drive it. Super easy to drive around town, the hotter it gets does get a little hard but it holds the power easy as 
    • Shit thing to find eh? I guess the big issue is that whatever "fix" you do now, it might slow the rust down but won't fix it. I just wanted to add that in no way is fixing sheet metal in 3 dimensions the place to start with welding....that is a pro only job because its too hard to work out where things should be, let alone doing a clean enough job that it can look OK and still be strong too.  I needed to get a new rear quarter panel on the GTR and it took a pro weeks to get the old one off cleanly, new one on in the right place and looking somewhat like it should have with most of the previous connecting panels in place. Gluing a couple of bits of metal together with a welder in the garage is doable, but that is totally different to doing panel  replacement
    • This seems to be a very popular swap since all the turbo skyline prices went through the roof! I'll let someone more familiar chime in, but I understand that yes you probably want to swap the loom in to swap out the auto TCM stuff. You should not assume everything just plugs in either, you need to check at least the ECU wiring diagram for any differences at the plug at the left headlight and probably the ones near the ECU that join the dash loom too  
×
×
  • Create New...