Jump to content
SAU Community

R34 Power Fc D-Jetro, Fc Datalogit, R33/r34 Gtr Nismo S-Tune Suspension, 700Cc Sards

GTRNUR
 Share

Recommended Posts

GTRNUR Grand Master

GTRNUR

Posted
Posted (edited)

R34 GTR Power FC D-Jetro with Apexi 3.5 Bar map sensor $450

Power FC DataLogit (Black) tuning interface $200.

Nismo S-Tune coil overs - $500.

Sard 700cc low impedance, GTR direct fitment injectors and R34 GTR fuel rail $250.

All prices exclude freight.

Estimate $15-20 anywhere in Australia express for the PFC and Datalogit.

The suspension is a bit heavy, so factor in 100-150 for your postage costs. Will be shipped in Tein packaging, so it will travel well.

Negotiable, and will parts trade.

Cheers,

Ian

0434 147 478

Edited by GTRNUR
GTRNUR Grand Master

GTRNUR

Posted
  • Author
Posted

Single sensor, not two. The D-Jetro will support any MAP sensor provided you go to the effort of calibrating it properly.

No I didnt have any issues running a single sensor on a multi throttle RB. Although I suspect twin map sensors are more useful at providing a more stable load point on little engines with big cams.

http://www.frsport.com/APEXi-499-X002-AVC-R-Pressure-Sensor_p_9450.html

APEXi-499-X002

Apexi_499-X002_1.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Skid pans in/around Sydney?

      By PranK · Posted

      Crowd funding FTW
    • JC71
      ER34 trunk jack etc

      By JC71 · Posted

      Could someone post some pictures of the factory Jack , tools, spare tire and how they were in a 1998 ER34 2 door skyline originally?
    • Eric0
      HyperGear vs Pulsar Turbo RB25DET

      By Eric0 · Posted

      UPDATE: Hi all!  As we are getting towards the end of this thread where I’ll showcase final dyno numbers and graph, I wanted to provide an update. Tao from HyperGear has done an amazing job building the custom divided T3 housing for the G30. Communication was flawless, price was great, and now the housing is estimated to arrive in 7-10 days! Very very pleased. I must add, if someone is looking for an affordable turbo and end up reading this thread, I would recommend HyperGear. Genuine brands are the way to go as their proven reliability, predictable performance, and there’s a plethora of information available for specs, flow, and more. This HyperGear recommendation is based on their excellent communication, dedication, and willingness to listen to their customers. I particularly liked their ability to create custom adaptations tailored to specific needs, which is a HUGE benefit over other brands. And if we consider the HyperGear provided dyno results, it adds reassurance knowing their turbos can compete against genuine brands. Next update will be after the dyno!  
    • Duncan
      Probolt

      By Duncan · Posted

      I've previously seen people post up "dress up bolt kits" for RBs but don't remember seeing them specify the full contents. I can only really suggest you grab the verniers and start measuring, and keep in mind the cam cover and timing cover bolts are both quite specific with a wider unthreaded section where the bushes sit, that will make it hard to get aftermarket replacements which tend to be all thread (set screws) or for longer bolts a flat section with a shorter threaded section at the end
    • Beanie
      R34 GTT Battery Relocation To Trunk

      By Beanie · Posted

      I believe there was a similar one posted by @duggyphresh. They were re-routing their battery positive cable in the way I am also trying to achieve. Sorry, I’m new to this forum, so was a bit late to the party by a few months and so reignited the old thread, as I wanted to know how they got on with doing it.
×
×
  • Create New...