Jump to content
SAU Community

Recommended Posts

Yeah real glamour I know.

Managed to ruin a stud on the weekend which means I now have to buy ten new Nismo long (50mm) studs and new wheel nuts.

I presently have the Project Mu nuts:

http://www.project-mu.com.au/en/products/other_nut_racing.php

Problem being they are open ended and water sits in the ends of them after rain or when you wash the car and you end up with a corroded stud and nut.

So I am after something with a closed end, some STEEL (Not aluminium) and something that doesn't need a special key to unlock them with (So no 7 sided Nismo nonsense or lock nuts)

This is the closest I can find:

http://www.nengun.com/rays/17hex-lock-and-nut-set

I think they are steel but cant confirm. Does anyone have them? Do they fit the 50mm wheel studs?

Of course I then need two sets to get rid of the lock nuts.

Link to comment
https://www.sau.com.au/forums/topic/451511-wheel-nuts/
Share on other sites

I bought mine from the local repco, chrome/steel. The flange style is excellent for seating them in the socket when asking them on and off, and they last forever.

Wheel-Nuts_21.jpg

Not sure that a closed end nut will work on a long stud though

Link to comment
https://www.sau.com.au/forums/topic/451511-wheel-nuts/#findComment-7439546
Share on other sites

Problem being they are open ended and water sits in the ends of them after rain or when you wash the car and you end up with a corroded stud and nut.

LOL, come on man. I run the open ended steel Rays nuts. I always grease my studs and expect the film of grease means they never corrode. Oh, and my front studs are ARP so come zinc coated, though it no doubt wears off after lots of use. . Though my rear Nismo studs are plain steel and are in with a box of bolts and bits that are going off for zinc coating before my new rear end goes back together/into the car.

Link to comment
https://www.sau.com.au/forums/topic/451511-wheel-nuts/#findComment-7439671
Share on other sites

LOL, come on man. I run the open ended steel Rays nuts. I always grease my studs and expect the film of grease means they never corrode. Oh, and my front studs are ARP so come zinc coated, though it no doubt wears off after lots of use. . Though my rear Nismo studs are plain steel and are in with a box of bolts and bits that are going off for zinc coating before my new rear end goes back together/into the car.

Really - what torque do you use post lube?

Link to comment
https://www.sau.com.au/forums/topic/451511-wheel-nuts/#findComment-7439675
Share on other sites

keep using the $300 project MU nuts and just blow out the water after washing. Or go all out and spray a bit of WD40 in there...

Yeah bit late for that. They are already rusted and fkd. Glad I didn't pay $300 for them.

Roy, you don't happen to have a part number for the ARP studs - cant find a reference on their site.

Link to comment
https://www.sau.com.au/forums/topic/451511-wheel-nuts/#findComment-7440402
Share on other sites

I bought these off ebay australia

attachicon.gifpic113_01.jpg

they are great. Just did a quick search as I couldn't remember who I bought them off but there are tons of options.

Cheers

Neil.

These?

http://www.ebay.com.au/itm/Carbon-Steel-Wheel-Lug-Nuts-x-20-M12-x-1-25-Nissan-Subaru-Suzuki-Long-/261563738553?pt=AU_Car_Parts_Accessories&hash=item3ce669e9b9

ARK Design blah blah something.

Edited by djr81
Link to comment
https://www.sau.com.au/forums/topic/451511-wheel-nuts/#findComment-7440702
Share on other sites

It was these ones mate,,,

http://www.ebay.com.au/itm/ARK-Lug-Wheel-Nuts-4pc-M12-x-1-25-Subaru-Nissan-Suzuki-/380314944426?pt=AU_Car_Parts_Accessories&hash=item588c8983aa#ht_1338wt_999

Same shop but the heads are 17mm not 19mm,,,My wed wheels won't really take 19mm heads.

Cheers

Neil

Link to comment
https://www.sau.com.au/forums/topic/451511-wheel-nuts/#findComment-7440724
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, the latter. No diff should have a centre replaced without checking clearances because its unlikely to be the same as whatever came out. Not that that stops most people just checking a new centre in
    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
×
×
  • Create New...