Jump to content
SAU Community

Recommended Posts

A lug nut or wheel nut is a fastener, specifically a nut, used to secure a wheel on a vehicle. Typically, lug nuts are found onautomobiles, trucks (lorries), and other large vehicles utilizing rubber tires.

Jdm - Japanese Domestic Market

Don't know if this helps mate I used arp studs on my gtr. I bought the wrx kit for the front and rears. Fronts pressed straight in. the rear was a bit tighter to press in so a light file to help them go in all was needed and used Advan steel lug nuts open end.

Don't know if this helps mate I used arp studs on my gtr. I bought the wrx kit for the front and rears. Fronts pressed straight in. the rear was a bit tighter to press in so a light file to help them go in all was needed and used Advan steel lug nuts open end.

The reason for them being "A bit tight" was because the fronts and rears are different. Fronts are a 14.3mm (0.565") knurl (ie as per Subaru) and the rears are 13mm.

And nothing wrong with ALU, just torque them to spec.......

that's not really my experience. I never had a failure or one come off but I was not happy with the wear on the flange where they seat on the wheels or the fact that they didn't always hold at the torque they were set to. I've been a lot happier since I changed back to steel

  • Like 1

Rays Duralumin lug nuts look tasty...

And nothing wrong with ALU, just torque them to spec.......

weight reduction ftw.

100g of weight saving so close to the hub center is not worth didly squat.

My Rays Duralium nuts used to come loose constantly when torqued to spec. Think of the weight you'll save when a wheel comes off! :)

Cheap nasty steel wheelnuts are the way to go.

Was going to drill out the rear hub but the hardened steel makes mince meat if drill buts so just went Nismo studs on the rear. Lol turned down the end so they are quick start like ARP and dropped off to zinc coaters with other bolts ... Overkill is my middle name :)

I ended up getting all the arp studs for cheaper than a rear set of nismo ones, good old gtr tax!

Edited by just32gtr

The reason for them being "A bit tight" was because the fronts and rears are different. Fronts are a 14.3mm (0.565") knurl (ie as per Subaru) and the rears are 13mm.

Yeah that's why I originally bought them because of the close sizing match

I got lock lug nuts and got a special tool to unlock. but it fits on and is only about 10-15cm long. can someone tell me what tool to use to loosen them. I need something with a long lever so i don't think pliers will work :/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
    • Yup but for me its the HR ! Cut my teeth on the old holden 6s in the day ! And here's me thinking in the day it was also the 300ZX and the Mitsubishi GT3000 ! All, as well had good lines, but always seemed to need finishing off, style wise.
×
×
  • Create New...