Jump to content
SAU Community

Shed Clean Out 1/2Way Lsd Diffs + Various Ratios

sucram
 Share

Recommended Posts

sucram Rising Star

sucram

Posted
Posted (edited)

Cleaned the shed of diffs from my old track car, they have not had a lot of

use as they were spare diffs for various tracks, none have been used in the last 5 year

since I just run what I brung.

No drifting use, some road use as well, not abused on track. I would be classed as "smooth". I started track 15 years ago in a 400hp rx3 with a 2 way and tiny axles, I had to be gentile on the drivetrain as axles and LSD's were rare or super expensive and continued to drive that way.

All come with S13 rear covers so reuse your own if 2 bolt type. All are 5 bolt flange.

4.08 1/2 way interchangeable currently set to 1 way $850, I think its a kaaz (should have under 4k klm)

4.363 2 way $780 possibly tomei, maybe kaaz too (should have under 4k klm)

I only used factory oil + Castrol LSX lsd oil in all of my clutch LSD's

3.9 with viscous center $450

4.08 housing and gears only drop in your center, change rear cover if needed and go! $450

4.363 viscous $450

4.363 ratio only $260 shipped

4.363 crown wheel only (couldn't find the matching pinion $100 shipped)

Sorry I cant be more specific on the make of the aftermarket diff's, the tag either broke off or the writing faded so can only go off what I see

Pick up from Bankstown or Epping, currently can only ship just the 4.36 ratio as the others are too heavy to send via post.

Edited by sucram
  • 7 months later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      The Cool Tools Thread

      By MBS206 · Posted

      Don't use "gasless MIG" (FCAW) you want to use proper MIG. FCAW burns a few hundred degrees hotter than MIG will for mild steel. It is a true ball ache for sheet metal. New MIG / TIG machines even have features like "Spot Weld" as well as "Automatic" settings. Plenty of people say for DIY home hobby, the auto machines are pretty good for 95% of welding. I personally, I'm a sucker for punishment and wanting to dial it in, and be able to adjust the machine. Mainly because I used to MIG weld for a living, and being able to tweak and tune things ever so slightly was my preference. Hence when I bought my ACDC TIG, it has all the adjustments for everything and no "easy" mode. Ha ha I have stick, MIG, "gaslessMIG" and ACDC TIG at home. Out of them, if you're doing mild steel sheet metal repair, and want to do mild steel exhausts, go MIG. If you're thinking you'll want to get into doing some aluminium stuff, or stainless steel, get an ACDC TIG with HF start. If you can, get one with a foot pedal too. My MIG machine is a UniMIG, and my Stick/TIG is CigWeld. If I were buying another machine, I'd buy another CIGWeld. Lots of people having issues with UniMIG, and them not wanting to cover warranty. Everything has to go back to UNIMig themselves. CIGWeld, I've had to use their warranty on my machine for a gas leak, they have repair centres everywhere, (contracted authorised repair centres). First repair place I used were hopeless, but the second place were amazing. Warranty process itself super easy, and second repair place was telling me CigWeld actually cover in their warranty, upto an hour of techs time to help you with your machine, and going through the settings and helping teach you the machine. UniMIG keep trying to get out of replacing motherboards on 12 month old machines.   TLDR, mild steel sheet welding, buy a MIG. my vote is CigWeld for brand.
    • MBS206
      RB25DET Solid lifter conversion

      By MBS206 · Posted

      I guess that's what happens when someone can't convert metric to freedom units to machine something. 😛
    • MrStabby
      The Cool Tools Thread

      By MrStabby · Posted

      I've watched some vids and the technique seems to be to butt the sheets up to one another and use MIG to spot weld and slowly fill in the spots until its eventually all sealed. No runs as you would normally do, as there's too much heat generated that way. Yeah my stick welds are terrible these days because its been so long since i've done any of it. I expect to be spending many hours practicing
    • joshuaho96
      RB25DET Solid lifter conversion

      By joshuaho96 · Posted

      I have personally seen a Tomei USA RB26 cam that didn't even fit the head. Kind of nuts to me that it was even possible for that to happen but such is life.  There's two UP Garages in the US. One is a US branch of the Japanese company which sells things they brought over at tremendous markup. The other is University Place Garage/Fairlady Motors which is a shop best known for putting VCAM in RBs and trying to convince people to stop putting in 800hp of turbo on a 2.5L motor.
    • GTSBoy
      The Cool Tools Thread

      By GTSBoy · Posted

      Gasless MIG is not exactly suited to what I would call "delicate" or "attractive" welding. So I would rule it out for sheet metal rust repair type stuff, unless you're only doing it in hidden places. I'm thinking about getting myself a gasless MIG for "hack together" type work. Noting that my welding experience is very very low, and quite a long time ago. So I'm also looking for "simple", but I'm not expecting "excellent". I'm not even sure that proper MIG is the best for sheet metal work. I get the feeling that the degree of control and the minimisation of heat input that you get from TIG is probably what you really want. And then you have to get good at doing it before the welds won't look like a monkey flinging a handful of shit anyway. You're probably SOL for an easy and cheap way to get from where you are to where you want to be. Much like myself.
×
×
  • Create New...