Jump to content
SAU Community

Recommended Posts

I've always assumed its because more people = bigger economy (easy way to keep growth going) = more power. If you look at population density, resources etc, compared to other countries, Australia is no-where near full, even if you take out all the useless desert. Personally I would prefer to keep the population low, but I believe expanding the population enjoys support from both sides of politics

The actual population growth policy was around ensuring we have enough people should another country decide to invade following how close we came to this in WW2

Can't remember who it was, but pretty sure the line was - "lets populate ourselves, before someone else does it for us"

There was an estimate that we needed to grow by approx 200k people per annum.

It was viewed that around 70k could be achieved through birth rates, the rest would come from migration.

The UK was unable to meet the 130k needed, which then led to the ending of the "White Australia" policy and commencing migration agreements with several countries.

^ Interesting - that's another aspect of larger population = more power. Also, letting in younger immigrants could be used offset the ageing population, but i don't know if the system is setup that way, but it should be.

MHM had no right to be out on bail. He had not right to Centrelink benefits. And he had no right to be here. But I do pray for families and friends of the barista, the barrister and the bastard.

Seems like criminals have more rights/protection around here than non-crims. If I smash a would be robber over the head, he can sue me and will probably win.

The court's defence regarding his bail was that the prosecutors didn't have a strong enough case against him for the alleged murder. Disregarding his previous convictions of course!

Will things change regarding crims on the street? Probably not.

  • Like 1

Seems like criminals have more rights/protection around here than non-crims. If I smash a would be robber over the head, he can sue me and will probably win.

If he's taking your stuff, yes. If you think he's going to harm/kill you then you can defend yourself. For example, if you think "i am in fear of my life" and you accidentally smash him harder than is required so stop him killing you, because you're not an expert fighter, then you may be ok. I'd imagine that if it was a his word against yours thing in court, you'd probably be more believable being the victim.

If he's taking your stuff, yes. If you think he's going to harm/kill you then you can defend yourself. For example, if you think "i am in fear of my life" and you accidentally smash him harder than is required so stop him killing you, because you're not an expert fighter, then you may be ok. I'd imagine that if it was a his word against yours thing in court, you'd probably be more believable being the victim.

I've read a few too many Australian articles to say otherwise.

I've been listening to this shit since 10 o'clock this mourning, suprised it took this long for someone to post up about it

1 dude, really, don't we have snippers

No but we have media taking snaps of him in perfect view with no hostages as shields. just shot the dude in the head and save 2 innocents lives.

I've read a few too many Australian articles to say otherwise.

Me 2. tbh if someone steps on your property with the intent to steal something or hurt you or any of your family. laws should go straight out the window. Same when there is a sketchy muslim sending hate mail to deceased australian soldiers families and you don't have enough evidence to convict him of murder. keep him in jail until you can can find him guilty or innocent. don't send him into public to allow him to walk the streets among everyone else. I blame the courts/justice system more than the nut job that did it.

Edited by SkylineR33RB25

The police did do amazing 2 dead is pretty good for so much hostages. No blame on polices part.
But look at this image, no hostage as shield. any sniper in the world could make that. 999/1000 times

1418779188127.jpg

Me 2. tbh if someone steps on your property with the intent to steal something or hurt you or any of your family. laws should go straight out the window. Same when there is a sketchy muslim sending hate mail to deceased australian soldiers families and you don't have enough evidence to convict him of murder. keep him in jail until you can can find him guilty or innocent. don't send him into public to allow him to walk the streets among everyone else. I blame the courts/justice system more than the nut job that did it.

You would be ok with a "sketchy Christian" sending hate mail to dead soldiers? There's a group of Christians in america who do that and protest at funerals.

I assume you wouldn't like it.

Makes me wonder why you specified Muslim in your post. Makes no difference.

Edited by Ben C34

You would be ok with a "sketchy Christian" sending hate mail to dead soldiers? There's a group of Christians in america who do that and protest at funerals.

I assume you wouldn't like it.

Makes me wonder why you specified Muslim in your post. Makes no difference.

You're right. I wouldn't care who they are. If you don't support what we are doing over there then that's not the way to protest..

Me 2. tbh if someone steps on your property with the intent to steal something or hurt you or any of your family. laws should go straight out the window.

Your system requires a way to quickly and accurately establish intent. How would you do that?

The police did do amazing 2 dead is pretty good for so much hostages. No blame on polices part.

But look at this image, no hostage as shield. any sniper in the world could make that. 999/1000 times

1418779188127.jpg

Was that photo taken before Police could establish what was happening? Did he then stay away from the windows, with victims holding up flags in the windows, because he was worried about getting sniped?

The only story i heard was that he had a sawn off double barrel shot gun. If that's the case, then he was only ever likely to kill two people.

The whole "should have sniper ed him" armchair hindsight train of thought also assumes there was a sniper next to you camera man.

Um, get it right, it was an excavator chair, and I suggested it less then 2 hours after the shit started and they had 16 hours to organise something before the baristor did something

  • Like 1

Um, get it right, it was an excavator chair, and I suggested it less then 2 hours after the shit started and they had 16 hours to organise something before the baristor did something

Maybe you should change careers.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • You've just discovered a really good reason to tell yourself, yes, I do need to buy an aftermarket ECU. Put the MAF in the bin. Slap in the new ECU and have a think about what turbo sounds you prefer.  Do you want a 90's style BOV wooosh? Do you want a hektik tsututututu?  Mate, can't go wrong. Just gotta get that ECU and the world is your oyster. 
    • Hi. Iam just curisou about this topic. I saw this video. It is about Greddy Type FV2. I know that BoVs are about that sound but how and when to use it? I read some topic here and from what i have understand on stock RB with MAF there will be some "problems" if you use this BoV? It vents the air in to the atmosphere and the MAF on stock car needs this air back in to the intake and not out? Or is it wrong? If so...i saw you can put some adaptor to circule air back...but does that not "loose" that sound? I saw another BoV from Turbosmart and it has two "exhaust" like ports? One is for the stock tubing for letting air back and one is for "sound" and let the air in the atmosphere? Can someone please explain? This is the Greddy one:  And this is the Turbosmart.     THANK YOU!! EDIT: So i read about this topic some more and i if i understand that correctly: That Greddy can function either like BoV or 100% Bypass valve? And that Turbosmart is what they called hybrid so you can adjust what and how many air can be vented out or back in? Is this right? THX!
    • That dirty voltage drop is the culprit I suspect 
    • i cant get them all in 1 screenshot unfortunately as i just dont know how to move things around tbh, but they are all from the same log and the line crosses at the same point for all of them
    • It's about time I start work on my sun tan. So I knocked up a few parts that will all combine together to become my new power steering reservoir. Now just to produce an abundance of UV and IR rays while melting a heap of bits of alu to become one... Well, that's after I put one more hole in it for the return line to plumb to. It likely won't be this weekend, as Sunday I'm meant to be in doing some last minute stuff to the AMG race car, and the weekend after will be filled with non my Skyline stuff, followed by Bathurst 6 hour. So I don't expect to get to melt metal for at least 3 weeks.   I also managed to stuff up and start cutting the hole for the res to pump pipe on the wrong side of the line... It means instead of the lines being nice and tight against the inner guard, they'll be out off the guard.    The size of it means I should end up with about 1.8L of power steering fluid, and still have space for another half a litre before it reaches the overflow/breather. This is wayyyyyyy more capacity than factory, which should help keep Powersteer oil temps lower, and the design hopefully allows it to prevent any aerated oil being able to makes its way down to the bottom as it'll have a couple of baffles and some hopeful trickery to force air bubbles away from the bottom.
×
×
  • Create New...