Jump to content
SAU Community

Fs: R32 Gtr, Track / Project, Nsw - Aus Complied

GreddyGo
 Share

Recommended Posts

GreddyGo Rising Star

GreddyGo

Posted
Posted (edited)

Hey All,

Unfortunately I have been put in a tight situation which has resulted in needing to sell my track car project……
It has only been on Wakefield once over a year ago, since then it has sat in my garage whilst I get it ready for track work. It does get started monthly to check pressures and leaks etc.
As you will see from the build list below, it’s a very strong, fast and a reliable base to create an epic track car!

As it’s purpose was a track car, all interior components have been removed along with the sound deadening.
The complete chassis has been pop riveted for extra strength, along with the sills being filled with expanding foam for the little bit extra stiffness..

I still have most of the the interior components, these will go with the buyer in case you would like to rebuild, or part out for some extra cash.

This car has been registered in NSW, so all it “theoretically” requires is a blue slip to be back on the road.

I’m looking for a really quick sell here, so any reasonable offers will be considered.
I would be happy with anything over the 13K mark.

Model: BNR32 GTR
Year: 1992
Colour: Red metallic
Kms: 124,xxx
Condition: All in ok condition, considering it’s purpose was a track car, I was not too worried about this aspect of the car..


Here's what it has:

Cosmetic / Misc:

  • Genuine nismo front bar vents, and three piece genuine nismo side skirts.
  • Rear quarter skirt pods
  • 18x10 400R rays nismo 3 piece (genuine)
  • Sparco Racing Seat
  • RPM 5-point Harness
  • Door & Bulkhead Trimmed
  • Custom control console
  • Front Splitter (time attack style)
  • Front & Rear Tow points
  • Power Safety Switch w/ Remote
  • Headlight Induction Kit
  • Sound deadening removed
  • Internal painted same colour as car w/ Clear

Handling:

  • UAS front brake upgrade (324mm 2 piece rotors with billet dogbone spacers)
  • UAS brake air deflectors
  • Cusco brake master cylinder brace
  • Tein super street coil overs
  • Whiteline adjustable roll bars front and rear
  • UAS adjustable front camber arms
  • UAS adjustable front castor arms
  • Whiteline rear offset camber bushes
  • UAS chrome moly lock bar, all hicas gear properly removed
  • UAS urethane rear cradle bushes
  • UAS front triangle braces (fit behind front guards for rigidity)

Engine:

  • R33GTR Engine
  • Block was bored and honed 20thou (.5mm)
  • Tomei oil restrictor
  • ACL forged pistons
  • Spool rods with ARP bolts
  • R33 crank
  • R33GTR oil pump
  • Ross metal jacket balancer
  • Tomei 260deg cams inlet and exhaust with clearances checked and shims adjusted
  • HKS cam gears
  • Port matched stock exhaust manifolds
  • HKS 2530 turbo’s
  • HKS dump pipes
  • UAS front pipe
  • Hi-Flow metal cat
  • HKS Hi power exhaust
  • Just jap air oil separator
  • Catch can
  • Toyo tube and fin intercooler
  • HKS intercooler hard pipes with “t” bolt clamps
  • Extreme carbon fibre twin plate clutch.
  • R33 GTR gearbox converted back to push type clutch with R32 transfer case
  • Nismo gear knob
  • Nismo oil cap
  • Nismo radiator cap
  • Alloy radiator
  • Sard 700cc injectors
  • Bosch 044 fuel pump in tank
  • Braided oil & water turbo lines.

Electrical:

  • 300k speedo
  • Power fc with hand controller
  • 80mm Z32 AFMs
  • HKS EVC 4 boost controller
  • Oil pressure and oil temp gauges

Dyno:

  • 373RWKW on 20PSI using pump fuel.

Contact Details:

PH: 0413 659 640
Best to SMS me your questions.
I can freight interstate, at owners cost if required…
Hill’s District, NSW

Thanks

Josh Day (GreddyGo)

Pictures:

IMG_0316.jpg

IMG_0291.jpg

IMG_0309.jpg

IMG_0300.jpg

IMG_0303.jpg

IMG_0296.jpg

IMG_0304.jpg

Edited by GreddyGo
  • 2 weeks later...
  • 3 weeks later...
Roy Grand Master

Roy

Posted
Posted

I am getting close to calling you and doing something stupid :) My questions, and reason for posting vs calling as it may help other perspective buyers are:

- body...is it the angle of pics or are the drivers side rear qtr and door etc different colours? Has the car had a hit at any time?

- Related to above...I cant see any pictures of the areas where pop rivets have been used. Can you state where that has been done and post any pics.

GreddyGo Rising Star

GreddyGo

Posted
  • Author
Posted

@ER34 - Depends on how well you know the person doing the blues lip :)

@GiJOr33 - it can be driven straight away. Has the regular trip around the block for a checkup :)

@Roy - Body isn't 100%, I can't see any parts that have been resprayed. My price reflects this, as I could sell for more $$ if it was perfect.

All negotiable guys.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Ticking Sound On Idle - Rb25

      By MBS206 · Posted

      Have you put an aftermarket oil pressure gauge on and verified your oil pressure?   Noise being on the block, on exhaust side, how high up the block does it seem to be? It could be the VCT system getting cranky, especially if it's mainly at idle, and when warm, as that'll be your lowest point for oil pressure. Could be showing that oil passages / VCT solenoid are blocking.
    • WARLORD
      injectors top feed for sale

      By WARLORD · Posted

      Deatschwerks 1800cc sold
    • GTSBoy
      Ticking Sound On Idle - Rb25

      By GTSBoy · Posted

      Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • myrbgivesmeheadaches
      Ticking Sound On Idle - Rb25

      By myrbgivesmeheadaches · Posted

      Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • GTSBoy
      Ticking Sound On Idle - Rb25

      By GTSBoy · Posted

      This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
×
×
  • Create New...