Jump to content
SAU Community

Bilstein Shocks, Apexi Power Fc For Ecr33 Rb25, Top Feed Fuel Rail, Splitfire Coilpacks [syd]

chiksluvit
 Share

Recommended Posts

chiksluvit Experienced

chiksluvit

Posted
Posted (edited)

Have decided today that I will part out some parts in the car so the following items are for sale:

Bilstein shocks- Car handled really well with them, great for street cars and occasional track days.

Suits: 4wd Skyline / stagea models with eye mount at the rear. eg GTS4 GT4

Condition: Good condition, No leaks, fronts are only 5000km old, rears are about 15000km with circlip groove machined for height adjustment.

Also Included: Suspension top mount, stock R33 GTR rear springs (slightly higher spring rate than GTST).

Price: $350 for the set

Apexi Power FC for R33 GTS-t with EL Controller- Good reliable cheap plug and play alternative compared to most other ECUs.

Suits: R33 GTST, S1 Stagea with RB25DET

Condition: Only roughly 9 months old, latest model, in almost brand new condition

Also Included: EL hand controller, Box and all instructions included

Price: $990

Top Feed Billet Fuel Rail for R33 GTS-t- Does not require modification to the stock plenum, makes top feed conversion a walk in the park. It is set up as a single entry fuel rail but you also have the freedom of converting it to twin entry if you wish- just undo the top cap

You will only need to get the injectors and some fuel hose if you use this kit for the conversion- will save you a lot of pain and headaches

Suits: Bolt-on fuel rail for R33 RB25 top feed conversion, using 1/2 height top feed Bosch EV14s or Siemens Deka injectors,

Also Inculded: Cap and fitting for the top fuel exit and fittings on both ends, plenum spacers for the rail, spacer for 14mm injectors, 14mm to 11mm injector top hats

Price: $150 - will also throw in a generic fuel pressure reg for free. Been using this on a 280rwkw setup with no issues.

Splitfire Coilpacks- engine runs smooth and strong @ 280rwkw with them

Suits: series 2 R33 GTST RB25 and R34 GTR RB26,

Condition: as new condition, only had them for roughly 5000km as well.

Price: $300

Located in North Sydney, pick up available, shipping @ buyers expense.

PM me if interested.

Edited by chiksluvit
chiksluvit Experienced

chiksluvit

Posted
  • Author
Posted

Also stock fuel reg adapter for external mounting, good for top feed conversions without having to buy another reg

Does not come with the fuel regulator

$40

post-27668-14208458034646_thumb.jpg

chiksluvit Experienced

chiksluvit

Posted
  • Author
Posted

Fuel rail with the spacers and adapters. This makes rb25 side feed to top feed conversions with 1/2 height injectors like bosch ev14 , injector dynamic id1000s or Siemens deka a walk in the park

What it looked like installed

chiksluvit Experienced

chiksluvit

Posted
  • Author
Posted (edited)

The photos for power fc

This is the latest PFC for ecr33 with EL commander and additional tuning load vs timing feature. The EL hand controller has improved visibility.

Comes with box, original packaging etc, only used for roughly 9 months

Edited by chiksluvit
chiksluvit Experienced

chiksluvit

Posted
  • Author
Posted

Also included as part of the fuel rail:

Injector collar / spacer that sits on the plenum, brand new O rings will also come with them too as pictured in previous post

chiksluvit Experienced

chiksluvit

Posted
  • Author
Posted

One thing I'd like to add:

I have been very reasonable with the price of items that I have listed- a few of them being half or less than half of what I have paid for. They are not old parts either, most items have only been bought for 6~9 months and limited usage

so please, no unreasonable offers

chiksluvit Experienced

chiksluvit

Posted
  • Author
Posted (edited)

PFC Sold!

Items still available for sale:

Bilstein shocks- Car handled really well with them, great for street cars and occasional track days.

Suits: 4wd Skyline / stagea models with eye mount at the rear. eg GTS4 GT4

Condition: Good condition, No leaks, fronts are only 5000km old, rears are about 15000km with circlip groove machined for height adjustment.

Also Included: Suspension top mount, stock R33 GTR rear springs (slightly higher spring rate than GTST).

Price: $350 for the set

Top Feed Billet Fuel Rail for R33 GTS-t- Does not require modification to the stock plenum, makes top feed conversion a walk in the park. It is set up as a single entry fuel rail but you also have the freedom of converting it to twin entry if you wish- just undo the top cap

You will only need to get the injectors and some fuel hose if you use this kit for the conversion- will save you a lot of pain and headaches

Suits: Bolt-on fuel rail for R33 RB25 top feed conversion, using 1/2 height top feed Bosch EV14s or Siemens Deka injectors,

Also Inculded: Cap and fitting for the top fuel exit and fittings on both ends, plenum spacers for the rail, spacer for 14mm injectors, 14mm to 11mm injector top hats

Price: $150 - will also throw in a generic fuel pressure reg for free. Been using this on a 280rwkw setup with no issues.

Stock Fuel Pressure Regulator adapter for external mounting- Good for RB25 top feed conversions without having to buy another reg
Suits: Nissan RB SR fuel regulator - maybe other cars too like subaru wrx but I'm not 100% sure

Also Inculded: Dash 6 male fitting
Does not come with the fuel regulator
Price: $40

Splitfire Coilpacks- engine runs smooth and strong @ 280rwkw with them

Suits: series 2 R33 GTST RB25 and R34 GTR RB26,

Condition: as new condition, only had them for roughly 5000km as well.

Price: $300

Edited by chiksluvit
chiksluvit Experienced

chiksluvit

Posted
  • Author
Posted

Front Bilsteins Sold!

rear pair still available @ $100 for the pair

Items still available for sale:

Bilstein shocks rears only- Car handled really well with them, great for street cars and occasional track days.

Suits: Skyline / stagea models with eye mount at the rear. eg GTST, GTS, GT, GTS4, GT4

Condition: Good condition, No leaks, rears are about 15000km with circlip groove machined for height adjustment.

Also Included: Suspension top mount, stock R33 GTR rear springs (slightly higher spring rate than GTST).

Price: $100 for the pair

Top Feed Billet Fuel Rail for R33 GTS-t- Does not require modification to the stock plenum, makes top feed conversion a walk in the park. It is set up as a single entry fuel rail but you also have the freedom of converting it to twin entry if you wish- just undo the top cap

You will only need to get the injectors and some fuel hose if you use this kit for the conversion- will save you a lot of pain and headaches

Suits: Bolt-on fuel rail for R33 RB25 top feed conversion, using 1/2 height top feed Bosch EV14s or Siemens Deka injectors,

Also Inculded: Cap and fitting for the top fuel exit and fittings on both ends, plenum spacers for the rail, spacer for 14mm injectors, 14mm to 11mm injector top hats

Price: $150 - will also throw in a generic fuel pressure reg for free. Been using this on a 280rwkw setup with no issues.

Stock Fuel Pressure Regulator adapter for external mounting- Good for RB25 top feed conversions without having to buy another reg
Suits: Nissan RB SR fuel regulator - maybe other cars too like subaru wrx but I'm not 100% sure

Also Inculded: Dash 6 male fitting
Does not come with the fuel regulator
Price: $40

Splitfire Coilpacks- engine runs smooth and strong @ 280rwkw with them

Suits: series 2 R33 GTST RB25 and R34 GTR RB26,

Condition: as new condition, only had them for roughly 5000km as well.

Price: $300

chiksluvit Experienced

chiksluvit

Posted
  • Author
Posted

http://www.sau.com.au/forums/index.php?/topic/403711-Top-Feed-Rail-In-R33-With-Stock-Plenum%2E%2Eyes-It-Can-Be-Done/page__view__findpost__p__7421431

Above is a link to the guide on how to install the top feed fuel rail with 1/2 height injectors. The fuel rail is exactly the same as what Johnny has except for the colour, so you will be able to go by this guide when doing the conversion.

chiksluvit Experienced

chiksluvit

Posted
  • Author
Posted

Will include additional barbed fitting for the fuel reg adapter @ no extra cost so you can choose to use either the barbed hose fitting and the dash 6 fitting

post-27668-14220567738421_thumb.jpg

chiksluvit Experienced

chiksluvit

Posted
  • Author
Posted

Have pulled the rear shocks out, washer on strut top isn't in the best condition and the top of one of the shaft is rounded.

Top nut isn't frozen and there are no leaks however. It has been loosened so you can swap the springs over or to adjust the height

In light of the condition, Price of bilstein rear suspension is now dropped to $50, includes GTR rear springs and strut tops

post-27668-14222452150874_thumb.jpg

chiksluvit Experienced

chiksluvit

Posted
  • Author
Posted (edited)

Just tidying this thread up and price updates- price drop on most items refer to below

Bilstein shocks rears only- Car handled really well with them, great for street cars and occasional track days.

Suits: Skyline / stagea models with eye mount at the rear. eg GTST, GTS, GT, GTS4, GT4

Condition: No leaks, one of the shock shaft is rounded at the top, top nut is loosened however. has with circlip groove machined for height adjustment.

Also Included: Suspension top mount, stock R33 GTR rear springs (slightly higher spring rate than GTST).

Price: $50 for the pair

post-27668-14222452150874_thumb.jpg

Top Feed Billet Fuel Rail for R33 GTS-t- Direct bolt on to the stock plenum, makes top feed conversion a walk in the park.

You will only need to get the injectors and some fuel hose if you use this kit for the conversion- will save you a lot of pain and headaches

Follow this link for installation instructions, it is the same kit as Johnny's http://www.sau.com.au/forums/index.php?/topic/403711-Top-Feed-Rail-In-R33-With-Stock-Plenum..yes-It-Can-Be-Done/page__view__findpost__p__7421431

Suits: Bolt-on fuel rail for R33 RB25 stock plenum, using 1/2 height top feed Bosch EV14s or Siemens Deka injectors,

Also Inculded: Cap and fitting for the top fuel exit and fittings on both ends, plenum spacers for the rail, spacer for 14mm injectors, 14mm to 11mm injector top hats

Price: $130 - will also throw in a generic fuel pressure reg for free. Been using this on a 280rwkw setup with no issues.

Stock Fuel Pressure Regulator adapter for external mounting- Good for RB25 top feed conversions without having to buy another reg
Suits: Nissan RB SR fuel regulator - maybe other cars too like subaru wrx but I'm not 100% sure

Also Inculded: Dash 6 male fitting
Does not come with the fuel pressure regulator
Price: $40

post-27668-14220567738421_thumb.jpg
post-27668-14208458034646_thumb.jpg

Splitfire Coilpacks- engine runs smooth and strong @ 280rwkw with them, update your old tired coilpacks, fixes the common misfire on boost issues

Suits: series 2 R33 GTST RB25 and R34 GTR RB26

Condition: as new condition, only had them for roughly 5000km as well.

Price: $250

Edited by chiksluvit
chiksluvit Experienced

chiksluvit

Posted
  • Author
Posted

Coilpack sold

Bilstein shocks rears only- Car handled really well with them, great for street cars and occasional track days.

Suits: Skyline / stagea models with eye mount at the rear. eg GTST, GTS, GT, GTS4, GT4

Condition: No leaks, one of the shock shaft is rounded at the top, top nut is loosened however. has with circlip groove machined for height adjustment.

Also Included: Suspension top mount, stock R33 GTR rear springs (slightly higher spring rate than GTST).

Price: $50 for the pair

post-27668-14222452150874_thumb.jpg

Top Feed Billet Fuel Rail for R33 GTS-t- Direct bolt on to the stock plenum, makes top feed conversion a walk in the park.

You will only need to get the injectors and some fuel hose if you use this kit for the conversion- will save you a lot of pain and headaches

Follow this link for installation instructions, it is the same kit as Johnny's http://www.sau.com.au/forums/index.php?/topic/403711-Top-Feed-Rail-In-R33-With-Stock-Plenum..yes-It-Can-Be-Done/page__view__findpost__p__7421431

Suits: Bolt-on fuel rail for R33 RB25 stock plenum, using 1/2 height top feed Bosch EV14s or Siemens Deka injectors,

Also Inculded: Cap and fitting for the top fuel exit and fittings on both ends, plenum spacers for the rail, spacer for 14mm injectors, 14mm to 11mm injector top hats

Price: $130 - will also throw in a generic fuel pressure reg for free. Been using this on a 280rwkw setup with no issues.

Stock Fuel Pressure Regulator adapter for external mounting- Good for RB25 top feed conversions without having to buy another reg
Suits: Nissan RB SR fuel regulator - maybe other cars too like subaru wrx but I'm not 100% sure

Also Inculded: Dash 6 male fitting
Does not come with the fuel pressure regulator
Price: $40

post-27668-14208458034646_thumb.jpgpost-27668-14220567738421_thumb.jpg
chiksluvit Experienced

chiksluvit

Posted
  • Author
Posted (edited)

Just gone through my box of parts and found an unused fuel rail for GReddy plenum- will throw this in the sale with the other fuel rail

Bilstein shocks rears only- Car handled really well with them, great for street cars and occasional track days.

Suits: Skyline / stagea models with eye mount at the rear. eg GTST, GTS, GT, GTS4, GT4

Condition: No leaks, one of the shock shaft is rounded at the top, top nut is loosened however. has with circlip groove machined for height adjustment.

Also Included: Suspension top mount, stock R33 GTR rear springs (slightly higher spring rate than GTST).

Price: $50 for the pair

Top Feed Billet Fuel Rail for R33 GTS-t- 2 rails included- one for Direct bolt on to the stock plenum, makes top feed conversion a walk in the park; the other is one that works with GReddy plenum, brand new never used so you can choose the right rail for your application

You will only need to get the injectors and some fuel hose if you use this kit for the conversion- will save you a lot of pain and headaches

Follow this link for installation instructions, the bolt on rail is the same kit as Johnny's http://www.sau.com.au/forums/index.php?/topic/403711-Top-Feed-Rail-In-R33-With-Stock-Plenum..yes-It-Can-Be-Done/page__view__findpost__p__7421431

Suits: Bolt-on fuel rail for R33 RB25 stock plenum, using 1/2 height top feed Bosch EV14s or Siemens Deka injectors,

Also Inculded: Cap and fitting for the top fuel exit and fittings on both ends, plenum spacers for the rail, spacer for 14mm injectors, 14mm to 11mm injector top hats

Price: $130 - will also throw in a generic fuel pressure reg for free. Been using this on a 280rwkw setup with no issues.

Stock Fuel Pressure Regulator adapter for external mounting- Good for RB25 top feed conversions without having to buy another reg
Suits: Nissan RB SR fuel regulator - maybe other cars too like subaru wrx but I'm not 100% sure

Also Inculded: Dash 6 male fitting
Does not come with the fuel pressure regulator
Price: $40

Edited by chiksluvit

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • drifter17a
      R34 power steering

      By drifter17a · Posted

      Thanks, plan is to drain all fluid tomorrow and do smoke test to find out the leak.   Appreciate your help and want to understand how the system work. So cooling is achieved by the long loop not any rad? The diagram seems to suggest it connects to somewhere inside the cabin and I thought that is a cooler inside firewall. If you look at the diagram it seems to show it connects to something inside firewall. I tried chasing it but not easy unless I take loads off   i am confident pump is good as fluid goes in and it gets soft( steering) but as soon as I turn engine off , loads of bubble come to surface and overflow. When engine is on , fluid level is below minimum but when off it shoots off and thinking it is sucking air in. I suspect aluminium pipe may have a crack line or whole   smoke test with no fluid should be a good start and if needed will remove the pump   In addition, the one going under the engine bay is high pressure line and one directly connecting from pump to resorvoir is return/ low pressure?   finally I searched and suggestion is to use dexron 2 but that is discontinued so bought dexron 3 as all research suggest it is compatible and shouldn’t cause any issues/ blow seals. I bought two liter of dexron 3 motul atf
    • GTSBoy
      RB25 S2 Idles but doesn't want to rev

      By GTSBoy · Posted

      Don't worry about. Just don't try to drive hard enough to make boost and you'll be fine.
    • GTSBoy
      R34 power steering

      By GTSBoy · Posted

      Yes. This has already been said. It is a loop of hardline in front of the radiator. Because.... the pump is on the LHS and the steering rack hydraulic connections are where they always are on a RHD steering rack....on the RHS. The high pressure line goes down under the engine, along the crossmember, like it does on all Skylines. Don't just throw expensive braided hoses/other kits at it. Work out what is wrong and fix that.
    • Trilbyte
      RB25 S2 Idles but doesn't want to rev

      By Trilbyte · Posted

      Still got the afm on the intake, clamps are shut tight, only loose hose is the one that goes from the j pipe towards the IACV, since it's next to impossible to find a factory hose and the barbs are different sizes (I'm still using clamps on this hose to try and help it seal on the iacv side) I've ordered parts to make up the hotside of the intercooler pipes, I'll plumb it in and see what happens in a few days I suppose The turbo's internally gated, can I just unscrew the tension rod to let the gate open?
    • McGarryR32
      T56 In Gtr

      By McGarryR32 · Posted

      Did this ever go further ? Would love some updated info 
×
×
  • Create New...