Wtb R32 R33 Gts-t Stock Waste Gate Actuator

[Missileman]

Wanting a waste gate actuator and bracket, condition unimportant as I'm actually after the mounting bracket so I can mount a adjustable actuator and retain the stock heat shield.

Cheers Mike.

[hardsteppa]

The bracket is part of the assembly so you would need to cut it off anyway. Some plate steel or alum would do the job...?

[Missileman]

Correct, but who wouldn't rather cut off the 33 actuator from the bracket, then drill two holes for the new actuator to bolt up to, and retain the stock heat shield

[Missileman]

someone might want a 32 actuator,(10psi) but no one wants a 33 ?

[Missileman]

this is the actuator I want to fit to the the stock bracket.... forget about the kando bracket and just concentrate on the black housing and two bolts http://www.ebay.com.au/itm/271715007774?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649

[hardsteppa]

Correct, but who wouldn't rather cut off the 33 actuator from the bracket, then drill two holes for the new actuator to bolt up to, and retain the stock heat shield

Ahhh....me actually, cos i looked at that option and decided it was a shit idea, easier to just make something new up. The kinugawa bracket can be fitted to stock turbo btw...

I'll leave it with u...