Jump to content
SAU Community

Recommended Posts

E85. I thought it would of made more but oh well have to ask Trent why it couldn't. It is a unopened 170k s1 engine. I'm thinking I should of went with the sat45 turbo now.

The boost curve is what surprises me because my other ss2 internal gate is full 21psi boost by 3750rpm and the curve looks a lot better than that and then goes completely flat.

post-84279-14333240028034_thumb.jpg

I'd replace the gasket between the runners and the plenumn. Some S1 are metal, later ones are rubber. Mines an S2 and was rubber, it started leaking and we didnt pick it up for a long time.

I used a cometic gasket from kudos ms.

Did u end up getting a front splitter made up?

im looking for ideas, want to make one soon.

Hey mate nah not yet but it will be getting sent back in to get one made up at havoc fab. Looking at something like this.post-84279-14343233710606_thumb.jpg

Yeh I looked through his build thread and found it there. Also speaking to top stage composites atm as well and might just bite the bullet and get there v3 package since tax times coming up.

  • 2 weeks later...

post-84279-14353199119936_thumb.jpg

post-84279-14353199777109_thumb.jpg

New wheels finally fitted. Had to raise the rear 50mm so they could fit. ROH Modena 18x10 +15 with 295 semis. Next I will have get the arches flared out because they sit a bit outside the guard. Don't no if I should keep them white or get them sprayed black.

Haha yeh I think some over fenders will have to be used. My panel beater is gunn try pump the guards out as much as he can first. They sit about 30mm outside the guards. As for ride height I will be coming down just have to wait until the guard are flared as the rear guard sits on the tyre if a go any lower. Haven't really had a chance to play around with my bc cooler era yet.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...