Jump to content
SAU Community

R34 GT-T Compliance in S.A

kralster

By kralster,
in South Australia

 Share

Recommended Posts

SS8_Gohan Grand Master

SS8_Gohan

Posted
Posted

Usually around $5500. I'm not aware of any S.A. places yet, but def 1 in Sydney (Mobility Engineering) and one in Melbourne (Cross-over Car conversions) - I think there is one in Qld coming up soon, Shogun???

also the DOTARS sites has a search function to find RAW's for certain vehicles, just do a R34 search.

cheers

raz0r$harP.UK Grand Master

raz0r$harP.UK

Posted
Posted

Compliancing is anywhere from $4500 to about $7-8000 (if plates are running short).

Basically the compliancer's job is to ensure that a car is at stock condition, which involves 'destroying' all non standard parts that are shipped with the car, as well as satisfying requirements for the ADRS, which may include fitting an unleaded fuel restrictor, new DOT approved tyres, adding a dimmer switch, etc). Oh, and they stick on a shiny purple VIN plate that certifies your car as an import.

Search for compliancing and you'll find more info about the requirements.

http://raws.dotars.gov.au/rawswebpublic/RAWPubMain.asp is the link to the DOTARS site where you can search for a workshop that can currently comply 34s..

kralster Veteran

kralster

Posted
  • Author
Posted

Cheers peeps.

I think i'll just import the car then maybe through Prestigue motorsports, and then get the compliancing done by myself. As in organise it to be done in Adelaide. Or can anyone recommend an importer to go through in Adealaide?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • kevboost7
      Magnetic Drain Plug Snapped in Half

      By kevboost7 · Posted

      Update: I got the magnet out. I bought 3 different flexible magnetic reach tools, but none of them worked. The magnet on the tip was all less than 2lbs of force, so i had to buy a special cylindrical magnet that had a pull force of 9lbs.  The magnet finally came in the mail yesterday, so i got under the car to get to work. The super strong magnet isn't that long, so i only have about 1 finger pinch lengths to hold it. I was so scared when i was going in the hole, that the 9lb magnet would just fly away inside the oil pan never to be seen again, but i had my butt cheeks clenched and finger gripped on that thing so tight, i managed to get it to suck the other magnet out.  It was a victory for me last night.         
    • MBS206
      New fix for low tyre pressure from bmw

      By MBS206 · Posted

      Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • sunsetR33
      Anyone know this frontpipe?

      By sunsetR33 · Posted

      Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • dbm7
      New fix for low tyre pressure from bmw

      By dbm7 · Posted

      Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • joshuaho96
      Anyone know this frontpipe?

      By joshuaho96 · Posted

      You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
×
×
  • Create New...