R32 Sedan - Grip and Drift (have my cake and eat it too build)

[CRSKmD]

Dropped the 32 off to have a custom Half cage (3/4 cage?) fabricated will update once complete.

Looking into harnesses now. I like the "yashio factory" ones purely because they are pink and look to meet all specs.

But open to opinions

[robbo_rb180]

7 hours ago, CRSKmD said:

Looking into harnesses now. I like the "yashio factory" ones purely because they are pink and look to meet all specs.

But open to opinions

Look at FIA rated/certified ones.

5/6 point, cam lock and good buckles. I've used sparco, MVP/Raceworks, velo.

Also look at Hans specific 2 to 3 inch belts if using a Hans.

Raceworks will do fancy colours too

[CRSKmD]

6 minutes ago, robbo_rb180 said:

Look at FIA rated/certified ones.

5/6 point, cam lock and good buckles. I've used sparco, MVP/Raceworks, velo.

Also look at Hans specific 2 to 3 inch belts if using a Hans.

Raceworks will do fancy colours too

The yashio ones are FIA but I’ll take a look at velo and raceworks too as I have seen they do pink in some options. 
 

only issue is my bride Digo R seat does not have a spot for the 5th point belt to come through the base cushion. Don’t really want to change the seats just yet. How will would a 5point work with that style seat

[Duncan]

13 hours ago, CRSKmD said:

only issue is my bride Digo R seat does not have a spot for the 5th point belt to come through the base cushion. Don’t really want to change the seats just yet. How will would a 5point work with that style seat

Not sure what the purpose is for a harness, but a 4 point harness is basically the same safety-wise as lap sash; you still run the major issue of submarining under the belt in a big one. 5 and/or 6 point belts require a hole in the cushion and seat base and mounts in a specific area under the seat

[CRSKmD]

3 minutes ago, Duncan said:

Not sure what the purpose is for a harness

The Car is still street registered and driven. The main use of the car is still just circuit days (time attack not door to door), Drifting (mild tandem-ing) and the occasional weekend drive. May do the occasional hill climb or road rally in future.

I almost always have passengers in the car at least at some point during a track day. So getting a cage for safety was the primary reason. I also did not want to run harnesses without at least a harness bar and cage. Another reason was that moving up a class for DSA days requires a cage.

I have seen people add a slot in the base cushion to accommodate the 5th/6th belts which i could be willing to do.

Eventually I will probably swap of the Brides for Velo GP90s etc which already suited. But financially wont be able to do that at the same time as the cage/harnesses.

 

[Duncan]

Yeah you should really holesaw a hole into the seat base and cut a slit into the cushion, and buy or 5 or 6 point one. 4 point is really not safe for track use and probably not CAMS rules compliant anyway. For the mountings there are diagrams in the CAMS manual about where the 5th and/or 6th point need to be, and you can buy or make compliant reinforcing plates for the nuts like this:

https://www.vsport.com.au/grayston-eye-bolt-back-plate-fia-approved

[MBS206]

4 hours ago, Duncan said:

Yeah you should really holesaw a hole into the seat base and cut a slit into the cushion, and buy or 5 or 6 point one. 4 point is really not safe for track use and probably not CAMS rules compliant anyway. For the mountings there are diagrams in the CAMS manual about where the 5th and/or 6th point need to be, and you can buy or make compliant reinforcing plates for the nuts like this:

https://www.vsport.com.au/grayston-eye-bolt-back-plate-fia-approved

Depending on the exact Sprints being ran, there may end up being a need for HANS, but from memory MotorSport Australia only need that currently at state level upwards, but I foresee them lowering that in the coming years, may as well plan for HANS capable setup.

[CRSKmD]

I have purchased a pair of FIA certified 6 point harness that is HANs compatible and will look into buying some appropriate seats like a Velo GP90 that already have the sub-belt slot rather than cutting up my genuine Bride Digo R's

Edited August 9 by CRSKmD
typo

[CRSKmD]

Cage is well underway so here is some progress pics

J18 Dual occupant spec with X-brace  through main hoop so i can still stack tools/jerry cans in the back seat area

Removeable door bars

some weld close ups and the fasteners used for the removable bars

All welded up ready for powder coating

[CRSKmD]

Cage has come back from powdercoating. Colour is "Dormant Purple."

Rested the door bars into the car for now just to see how the colour looked. Cutting carpet, install and trimming to come

[DaymoR32]

On 9/4/2024 at 8:59 AM, CRSKmD said:

Cage has come back from powdercoating. Colour is "Dormant Purple."

Rested the door bars into the car for now just to see how the colour looked. Cutting carpet, install and trimming to come

Love the colour, cage looks great mate!

[CRSKmD]

Th 3/4 cage is bolted in with carpet cut. I plan to retrim the back seat area to have it feeling complete/GT3 vibes soon. For the rear door cards I'm using some poor condition factory door cards. I will cut up and make flat cards from to clear the cage.

[CRSKmD]

On 6/28/2024 at 9:34 AM, CRSKmD said:

Unfortunately we ended up not quite getting to where I wanted alignment wise. Ideally I was targeting -3.5 to -3.8 camber as a good compromise for drift/grip/street. But due to the combination of custom configuration custom parts and the relationship between caster and camber (as you reduce camber you also reduce caster) on R32 we ended up at:

Front
Camber -4.5°
Caster +7°
Toe -4mm toe out each side. -8mm total

Rear
Camber -1.5°
Toe 2mm in each side 4mm total in

Perfect for drift but will be a touch too much camber for circuit. Thankfully the arms being modular means a change to one simple bracket will give me the adjustment I need to get to -3.7° camber and keep the caster at 7°.

Acostal came through with a new bracket which should free up some adjustment arm and hit my target of -3.7° camber and 7° caster. (old black, New silver)

fitted up and you can see how much shorter it makes the relative length of the caster rod as well as swinging it slightly to free up some misalignment in the bearing

 

with Caster maxed out short this is how the wheel sits on the car in the air

While I was at it, I pulled the wheels off the car to inspect the suspension and noticed this lovely gash. A pity becasue these tyres, while on wear bars, would have had at least one more dry grip day in them. Have a set of AD09 to try out next which I expect will be slower than the CR-s or AR-1 were but better in the rain with a longer life?

Edited 4 minutes ago by CRSKmD