Jump to content
SAU Community

Recommended Posts

Over two years of ownership I thought I'd make a build thread as i don't have enough procrastination in my life as it is.

up until this car I hadn't owned a car more than 6 months before selling it due to being bored of it or finding something else.

Originally bought this car back in November 2012 as a means for a quick profit. The plan being to fix the little problems, swap the wheels and sell it.

However as with most thing in life it did not go to plan...

This is how it was when i bought it

coilovers with chopped springs

1/2 turbo converted

lenso D1r 18x11.5 +12 with 235/40/18
Horrible interior missing parts.

http://i239.photobucket.com/albums/ff130/crskmd/lensoboth_zps38b51943.jpg

First thing to go was the enormous wheels which just were not to my taste and did not suit the car in my opinion. in the mean time i put the lenso on my trike haha

http://i239.photobucket.com/albums/ff130/crskmd/IMG_0062_zps2ba980d1.jpg

Bought some old school work wheels for $70 to roll on while I sold the lensos and bought another set. also put some stock struts with lowered springs in.

http://i239.photobucket.com/albums/ff130/crskmd/IMG_0068_zps4ae40b61.jpg

Swapped the lensos for a few sets of wheels and cash my way. Included in the swapped sets was a set of R32 GTR rims

http://i239.photobucket.com/albums/ff130/crskmd/IMG_0071_zps0975bede.jpg

Due to the excessive guard rolling that had been required to “fit” the 18’s and the ill-fitting +30mm vented fiberglass guards the gtr wheels sat a fair way inside. which is kinda funny on 4 door

http://i239.photobucket.com/albums/ff130/crskmd/IMG_0088_zpsea8bf86a.jpg

here is where i will leave it for the first post and will steadily update to present day over the next weeks

Edited by PranK
Member requested title change

2013

I decided the car was much too quiet and bought a set of drift pipes for it.

IMG_0327_zpse1458c06.jpg

This hung very low and came up underneath the fuel tank. Buuut sounded the business.

Picked up a front lip from a type S R32 and tested it on my Type M bar. It “fit” bar the gap in the middle.

IMG_0126_zpsb82a2cda.jpg

There is a point in which having a front lip is not practical. I found that point…

IMG_0129_zpsf391bfcd.jpg

As I wanted to start modding it and getting it to run right I went and bought used universal FMIC kit. It was fitted to an RB20det R31 so I figured it would fit.

IMG_0286_zps9b26038a.jpg

IMG_0290_zps08d11175.jpg

IMG_0297_zps49a8931e.jpg

I found out why it was running so terrible. The motor had stock RB20DE injectors and ECU with a turbo bolted. Basically as soon as it hit 3psi of boost it would pull timing and drop in to limp mode. So I sourced a set of RB20DET injectors + ‘tuned’ ecu from a cefiro

Edited by CRSKmD
  • Like 1

not sure if anybody cares but im going to keep going with this. :wave:

I got stuck three wheeling and thought the only really solution is a 2way Nismo LSD. while fititng it inoticed my rear sway bar was missing entirely and fitted up a GTR one.

BOY did that make a difference! open diff +no sway bar -> tight 2 way and GTR sway bar.

some spacers where bought to fill out the guards.

13819_10151631393954896_1420058247_n_zps

307592_10151630877614896_922887527_n_zps

I found a Type M 2 door interior for a price that was to good to pass. fitted the seats, dash center console and sold the rest. while i was at it i replaced all the speakers and ran fresh wiring.

AJD 2013

i entered All japan day for the first time which was a fantastic experience which i recommend to anybody who hasn't done anything similar.
Here few pictures from he day below.

577968_4990015422632_12169396_n_zps7a096

181074_451472474921249_917299058_n_zps83

71992_388594297915056_945219255_n_zps672

S13 bootlip (Origin?)

IMG_2294_zps00ee4ff4.jpg


New exhaust. An old AM performance build that solomon had on his 32 years back. this exhaust is a bit of a broad minded person and has been on many R32's

centre varex (cut and shut for ground cleance) stainless 3" then out to Ti tips

1899013_10152661012099896_816189490_n_zp

Cracked headlight so bought a pair of projectors and blacked them out and installed some jaycar HIDs

Also fitted some orange indicators while i was at it.

IMG_1343_zpsc0a23638.jpg

Blew up rb20 turbo and figured that the one thing my untuned NA motor needed was a bigger turbo. so i found an RB25 neo (OP6) and fitted that up. Around the same time i also installed a Front Facing Plenum.

2_zps0e346e4c.jpg

Yes it looks horrible and messy here. Fear not as I cleaned it up down the track but that how it sat for a while.

As awesome as it was having cheap HID's in factory projectors not designed for them. the light output was atrocious and it had some seriously bad defractions going on.

I upgraded the projectors to (morimoto mini) Bi-Xenons from Loudz Creations and I also fitted some “demon eyes” for added wank factor.

Finished product:

920019_10152791850379896_863760709171190

Loose guide: (if anyone is more interested feel free to contact me with any questions)

i picked up another pair of factory projector headlights so my car did no ahve to be off the road for any length of time.

200_zps519bdd48.jpg

remove glass lens. i used a heatgun as death was not worth using the oven.

201_zps9e11e502.jpg

unscrew and pop out shroud

202_zpsd67fb049.jpg

side by side shot of the factory and the new ones. they are smaller but specifically designed for HID's (curvature for focus etc). note the clearer glass

204_zps14141421.jpg

205_zps42383797.jpg

clearly they are not going to just bolt in. i cut the bracket off the factory ones so that i could retain the factory adjustments

208_zps8bb856c0.jpg

209_zps623b7eb9.jpg

i digged the blacked outlook for my car so i did the same again. (light sand, plastic adhesion primer, high temp satin black). test fitted new projector in hole.

217_zps1bfe00c5.jpg

"Demon eyes"

dissassembled the new projectors and stuck some cree LEDs behind in a ring pointing inwards. sequred with high temp copper silicon (gets hot when HIDS running)

220_zps5c48eebb.jpg

221_zps0983410c.jpg

test photo of leds on

218_zps9d610ec5.jpg

re assembled lights: to attach the projector to the OEM bracket i sued some electrical standoffs and some simple brackets bad from scrap alloy

225_zps672eaccb.jpg

  • Like 1

Headlights look awesome.

How much power did you make with the op6?

Cheers mate. Light output is phenomenal as well.

Pre tune I made about 175kw. Post tune I made 206kw.

I still have a ways of updates to go until I'm up to current day

Dropped into Jaustech for a checkup and they told me that my rotors where below minimum thickness and one was infact warped!

I figured if i ahve to replace them i might aswell upgrade. I decided on going to 324mm (R33 Brembo size) rotors and a caliper adapter to run the 4 pots. this plan also means i can drop in the R33 Bremo's down the line if i desire.

As much as i liked the GTR wheels, 16" was not going to be able to clear the new brake setup so i began the hunt for a new set of wheels.

What i decided on was a set of Advan AVS model T7's in a 17x9 +22 all around. i picked these up in...well used...condition from Stewy.

Basically all of the wheels were like this to some extent.

268_zps9e3e2bcf.jpg

269_zps8712675f.jpg

fixed and primed

299_zps34e3ec77.jpg

colour coat. actually really digged the matte look and almost left it there.

308_zps6f735d04.jpg

first coat of clear

315_zps0828a2a6.jpg

clear done

317_zpsb82bdd1f.jpg

close up shot. hard to see here but tis gunmetal with slight blue pearl. finish isnt perfect but i was more than happy with them

316_zps86021761.jpg.

fitted up some scrappies to get me rolling

331_zps0b7318d3.jpg

This depleted my money for a while so brakes had to wait.

All Japan Day 2014

1957950_1429340673973785_212956278_o_zps

1962794_10152023950275945_1234338005_n_z

1932511_537106393069820_1559260216_o_zps

1185428_582857388449794_1617785896_n_zps

1781902_582857418449791_529582016_n_zps1

1655669_644869378916414_137874043_o_zps8

  • Like 1

Brake upgrade time.

finally had to justify changing to 17" rims and follow through with the brakes.

stocks

IMG_3353_zps21cbfb06.jpg

516_zps8fea3018.jpg

upgrade goodies. decided on some DBA T3 "club Spec" rotors and bendix ultimate pads(good balance between performance noise and dust on a daily driven car in my opinion)

470_zpsum0fbfsy.jpg

rotor comparison

IMG_3360_zps21362675.jpg

cleaned up and painted rotors I used metalcast paint. this took forever due to the 25 + years of brake dust!

524_zps1f3b1148.jpg

gently sanded back to basecoat to make the nissan logo pop a bit more.

529_zpsbff997c7.jpg

fitted up with caliper adapter. as you can see not all of the rotor surface is used but the extra leverage it gets and the better cooling made a noticable difference.

530_zps8aafc741.jpg

wheel on

531_zpsd232038e.jpg

side by side comparison

10173486_10152786974654896_759884142_n_z

full car side shot

538_zpsq15ocln9.jpg

Edited by CRSKmD
  • Like 2

As much as I always stood by my Type M bar and said that GTR front bar's only belong on GTR's a good deal came up and it is hard to deny that the GTR bar just looks better.

668_zps7f5163f7.jpg

The bar had some damage and the bar was Bayside Blue (which my car was not).

706_zpsb1d57ef6.jpg

However it matched close enough and look great in my opinion.

side by side with mates 2 door with FiberGross GTR (ish) bar

679_zpscc7e1df1.jpg

Time for my very first trackday.

I remember the first thing my dad said when i told him my intentions " alright, but be prepared to bring it back on a trailer."

I signed up for Drift Techniques out at Tailem Bend.

skidrims fitted. fluro represent!

10321741_321169404706746_894724443299753

_DSC8087_zpsy3rsetqs.jpg

_DSC8284_zps6sgllh2t.jpg

not much ground clearance with the skidrims on...

10321626_321169611373392_881891905481801

checking for tyre wear

_DSC8394_zpsnwt97je7.jpg

with an instructor int he car working on tight cone work

10368818_321169371373416_893030914058683

started too get it

10355466_321169678040052_262785019039447

10718051_669684809767051_1777802758_o_zp

as dad predicted on the trailer to take it home. thankfully i had some awesome mates with even worse luck willing to take my car back for me.
Managed to do some gearbox damage

10329191_10152953945879896_6825765926296

852_zps7g1yiv9g.jpg

Here is what came out of the sump plug when i dropped the gearbox oil. all in all i dont regret the day and the damage even though my day was over my 11am. I learnt a bit and the damnage just meant an excuse for an upgrade...

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
    • Yup but for me its the HR ! Cut my teeth on the old holden 6s in the day ! And here's me thinking in the day it was also the 300ZX and the Mitsubishi GT3000 ! All, as well had good lines, but always seemed to need finishing off, style wise.
×
×
  • Create New...