Jump to content
SAU Community

Recommended Posts

Hey guys I just bought a R33 GTS-T and it's a great car but the tyres on it are on there way out. I've been driving it around a bit and in the dry they seem ok but in the wet and not even on a hill there is no way I can take off without losing traction. Basically what I'm looking for is a set of tyres that have good grip in the wet and don't make too much noise.

What do you guys recommend? I am thinking of going with the Bridgestone Potenza Adrenalin RE002.

By the way I did look at the sticky post but there is too many pages and different ratings on tyres. My price range is flexible, obviously cheaper the better but if I have to fork out for a good set I do not mind - probably keep it under $1000 for a set though.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/452541-r33-gts-t-best-tyres-for-in-the-wet/
Share on other sites

KU31. Cheap, cheerful and they work.

KU36. Cheap, cheerful, stick like shit to a blanket, noisy as buggery, but worth it.

There are many other options, even some very cheap ones, such as the Federals, Achilles, etc.

Most serious brand (Goodyear, Dunlop, Bridgestone, Pirelli, Yokohama, Toyo, etc) tyres that are not really OLD (like the FK452) are going to cost more than $1k per set.

Perhaps I should confess that the 36s are not the BEST in the wet. They work fine in the wet, but they won't handle standing water. Not enough tread on them to pump a LOT of water. But I've never had low confidence with them in winter. Just don't lean on them cold, and don't try to tow skiers.

I'm a big fan of Maxxis tyres and they are more than reasonably priced. I have a pair of terrible tyres on the back of my GTST at the moment that came with the wheels I bought, they do the same thing in the wet as you describe. After a good research session the other day I settled on getting a couple of Maxxis MA-511 to replace them. They seem to be a newer version of the Maxxis MA-V1 which I have had a set on the front for years and can't say enough good things about.

A good tyre review and opinion site to check out and see how a potential purchase is going to stack up is http://www.tyrereviews.co.uk/

Edited by Malakai

Nitto INVO tyres aren't too bad in the wet either and provide decent dry weather grip.. Great daily tyres IMO and not too noisy.

At the same time, perhaps look at lightly shimming up the diff OR just going with a new mechanical diff. I find the stock VLSD likes to single peg on days, it's very temperamental like a female.

I'm running Goodyear Eagle Asymmetric 2 in 17" and they are really quite good in both dry and wet. Paid about $900 new for a set online. Always check the date of manufacture before buying though.

I'm running Goodyear Eagle Asymmetric 2 in 17" and they are really quite good in both dry and wet. Paid about $900 new for a set online. Always check the date of manufacture before buying though.

I just took a set of those off my car. Totally underwhelming tyre. Not awful. Just.....not great. Only lasted 12000km.

I just took a set of those off my car. Totally underwhelming tyre. Not awful. Just.....not great. Only lasted 12000km.

Interesting, what did you have prior and what are you running now, out of curiosity?

KU36 before. And oddly enough, KU36 again. I was actually intending to get RS-3s, but they're unavailable for the next 3 months.

The Goodyears had this horrible tendency to judder as I turned out of my driveway (like......really really low speed understeer!). I spent ages trying to work out if it was a tyre issue or an alignment issue, including spending on 2 extra alignments that the car wouldn't have gotten. So, on the Tuesday morning with Goodyears on it judders on the way out. On the Wednesday morning with the KUs on, no judder. I think that answered that question. That sort of crap pretty much explains my experience with the Goodyears.

I've used KU36 probably 7/8 years ago - wasn't a total fan of them to be honest..

But then again, they were never taken on the track. I found they did like to understeer until it had some decent heat through them

Maybe. Dunno about that pricing here in Adelaide though (as in, getting Nitto for pricing that's competitive with the KU36 price). The Tyrepower store I use are good blokes who are aware that I have previously bought in tyres from the eastern states and from the US to get good stuff at good pricing, and so they tend to offer me the best pricing that they can. They handle Nitto also, and the pricing on them was not attractive last week.

I'm up for new tyres soon too, not sure I want to put NT01s at the rear.. that might result in a broken gearbox :(

I'm running NT01 at the front, surprisingly they're not too bad in the wet!

Ive got Hankook Ventus 452s on the mrs car and also on my XR6 work ute which has an alloy tray and even in the wet in 1st gear the traction control light doesn't come on! Pretty impressive all rounders actually. They are quiet with very good grip wet and dry are reasonably priced.

I also am not a fan of the KU36. The RS-3s shit all over them in all conditions and are also probably a bees dick quieter. But they aren't what you'd call quiet lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The max they would go for me is 50.
    • That cannot have been a fun set of drilling. The stock "baffle" looks identical to rb26, I just cut fuel cell foam to fit the full length under the baffle.
    • I understand your sarcastic exasperation. But to be fair - the baffles do indeed fit OEM cam covers. They did omit to say that you need to do a bunch of stuff. But they do fit them.
    • Got started on the modification to make these splash plates fit over the long weekend. First the surprisingly time consuming task of swapping all the cam cap bolts to Tomei cam cap studs. I did the method of removing one bolt at a time, applying loctite to the stud, double nutting to torque as the manual described. Then carefully unlocking the nuts without disrupting the torque of the stud (and going back to re-torque a few times when it slipped). Finally applying the nut and torquing to spec. Repeat x28 Next up I went about removing the stock cam cover baffle so I could ensure it was fully clean after drilling for stud clearance.  As the blind rivets holding the baffle on were domed I used a punch to mark the center then used 4mm drill bit to carefully drill out the rivet without going too far part the baffle. As seen in other thread here is what is inside the stock baffles I decided on M4x6mm bolts to bolt the baffle plate back on with. I used a 3.3mm drill bit with some tape to mark the depth at ~8mm. Next was to tap the threads using a cheap bunnings kit M4x0.7. With the baffle removed I also drilled out the spot welds holding in the baffle plate oil returns. Unsure whether this was the best option or if I should have cut holes in the Hypertune splash plates to allow the oil drains to still function... time will tell. I then removed the the Hypertune splash plates so I could rest the cam cover on top and use a dab of grease to mark where the studs impacted the oem cam cover baffle. The most obvious spot was on the hump from the stock mesh is held. Using this hole as an anchor I bolted the oem baffle plate back into the cam cover and lined up the Hypertune splash plate. Marked the rest of the holes for the studs and drill those out too. Total 32 holes drilled and 12 threads tapped on the passenger side cam cover alone for this bolt on part that totally clears all OEM cam covers.. Drivers side next as well as some E85 safe fuel foam to fill the space behind the behind cam cover baffle plates. oh and some lock nuts for the splash plates of course.
×
×
  • Create New...