Jump to content
SAU Community

Recommended Posts

Hey guys I just bought a R33 GTS-T and it's a great car but the tyres on it are on there way out. I've been driving it around a bit and in the dry they seem ok but in the wet and not even on a hill there is no way I can take off without losing traction. Basically what I'm looking for is a set of tyres that have good grip in the wet and don't make too much noise.

What do you guys recommend? I am thinking of going with the Bridgestone Potenza Adrenalin RE002.

By the way I did look at the sticky post but there is too many pages and different ratings on tyres. My price range is flexible, obviously cheaper the better but if I have to fork out for a good set I do not mind - probably keep it under $1000 for a set though.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/452541-r33-gts-t-best-tyres-for-in-the-wet/
Share on other sites

KU31. Cheap, cheerful and they work.

KU36. Cheap, cheerful, stick like shit to a blanket, noisy as buggery, but worth it.

There are many other options, even some very cheap ones, such as the Federals, Achilles, etc.

Most serious brand (Goodyear, Dunlop, Bridgestone, Pirelli, Yokohama, Toyo, etc) tyres that are not really OLD (like the FK452) are going to cost more than $1k per set.

Perhaps I should confess that the 36s are not the BEST in the wet. They work fine in the wet, but they won't handle standing water. Not enough tread on them to pump a LOT of water. But I've never had low confidence with them in winter. Just don't lean on them cold, and don't try to tow skiers.

I'm a big fan of Maxxis tyres and they are more than reasonably priced. I have a pair of terrible tyres on the back of my GTST at the moment that came with the wheels I bought, they do the same thing in the wet as you describe. After a good research session the other day I settled on getting a couple of Maxxis MA-511 to replace them. They seem to be a newer version of the Maxxis MA-V1 which I have had a set on the front for years and can't say enough good things about.

A good tyre review and opinion site to check out and see how a potential purchase is going to stack up is http://www.tyrereviews.co.uk/

Edited by Malakai

Nitto INVO tyres aren't too bad in the wet either and provide decent dry weather grip.. Great daily tyres IMO and not too noisy.

At the same time, perhaps look at lightly shimming up the diff OR just going with a new mechanical diff. I find the stock VLSD likes to single peg on days, it's very temperamental like a female.

I'm running Goodyear Eagle Asymmetric 2 in 17" and they are really quite good in both dry and wet. Paid about $900 new for a set online. Always check the date of manufacture before buying though.

I'm running Goodyear Eagle Asymmetric 2 in 17" and they are really quite good in both dry and wet. Paid about $900 new for a set online. Always check the date of manufacture before buying though.

I just took a set of those off my car. Totally underwhelming tyre. Not awful. Just.....not great. Only lasted 12000km.

I just took a set of those off my car. Totally underwhelming tyre. Not awful. Just.....not great. Only lasted 12000km.

Interesting, what did you have prior and what are you running now, out of curiosity?

KU36 before. And oddly enough, KU36 again. I was actually intending to get RS-3s, but they're unavailable for the next 3 months.

The Goodyears had this horrible tendency to judder as I turned out of my driveway (like......really really low speed understeer!). I spent ages trying to work out if it was a tyre issue or an alignment issue, including spending on 2 extra alignments that the car wouldn't have gotten. So, on the Tuesday morning with Goodyears on it judders on the way out. On the Wednesday morning with the KUs on, no judder. I think that answered that question. That sort of crap pretty much explains my experience with the Goodyears.

I've used KU36 probably 7/8 years ago - wasn't a total fan of them to be honest..

But then again, they were never taken on the track. I found they did like to understeer until it had some decent heat through them

Maybe. Dunno about that pricing here in Adelaide though (as in, getting Nitto for pricing that's competitive with the KU36 price). The Tyrepower store I use are good blokes who are aware that I have previously bought in tyres from the eastern states and from the US to get good stuff at good pricing, and so they tend to offer me the best pricing that they can. They handle Nitto also, and the pricing on them was not attractive last week.

I'm up for new tyres soon too, not sure I want to put NT01s at the rear.. that might result in a broken gearbox :(

I'm running NT01 at the front, surprisingly they're not too bad in the wet!

Ive got Hankook Ventus 452s on the mrs car and also on my XR6 work ute which has an alloy tray and even in the wet in 1st gear the traction control light doesn't come on! Pretty impressive all rounders actually. They are quiet with very good grip wet and dry are reasonably priced.

I also am not a fan of the KU36. The RS-3s shit all over them in all conditions and are also probably a bees dick quieter. But they aren't what you'd call quiet lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can you enlighten me on your best practice regarding these hoses? I don't wanna make the same mistake if you already got a better solution.
    • I have some silicon hoses already, for example engine to watercooler. But yeah, I get the sentiment. The lower intercooler silicon hose is drippy too, despite not being very old. Does anyone except Nismo make these same lines out of rubber? Long term I think they'd be the better replacement, especially since the car won't live as hard a life anymore as in the past nor be driven as often.
    • I know most issues are just age related. But for example the turbo oil drains, there is dash adapters for these and you can just make a braided teflon line for them and (probably) never have them leak again. Also not terribly expensive. Can you even get the factory hardlines from new? Or are they repairable if they break?
    • I know it'd be much much easier with the tool. I hope I can find one that won't take 3 weeks to get to me an isn't a "Asian models kit" that has tons of (to me) useless adapters for a load of cash.   It's a summer project/fun car. I do wanna enjoy it, without endless downtime over and over. So yeah I would even go and buy an engine crane + stand to save myself the trouble of hard to reach or unreachable places going bad later on. Would also be a good opportunity to put on a Fluidamper, renew the mains seals and stuff like that. I have some money on the side that I can use for that, what I wouldn't want to or be able to do is let everything be done by a shop or have my engine completely rebuild right now. I intend to do most of the "doable" jobs myself. Pulling an engine can't be that hard, can it?
    • Evening all. Got this odd issue with my R34 GTT. If I let the car idle for around 15 seconds or more (even when cold) and I jab the throttle a bit, a decently sized plume of blue/grey smoke comes out the exhaust. Doesn't smoke when idling alone, just when giving it some gas after idling. No smoke on cold start or from what I know, normal driving. Not 100% sure about smoke on decel but I don't think there's any. Any pointers on what I should start doing to troubleshoot it? Or if anyone has experienced the same I'd love to get some insight. Cheers.
×
×
  • Create New...