Jump to content
SAU Community

Motorsport Round 1 - Phillip Island


ssxRicho

Recommended Posts

Hey guys,

I've entered for the Sunday now as well and looking forward to getting back out at PI and competing in the championship this year.

For those who don't know me yet I've got a VX SS Commodore with an N/A LS1 putting out around 310rwkw and I ran a 1:54.9 last time at PI. :)

  • Like 1
Link to comment
Share on other sites

Haven't entered yet but I will at some point.

Anyone else going for the first time?

At the briefing they usually ask if there are any first timers. Just let them know and they'll either do a parade lap at low speed or get an experienced driver to passenger with you on the first session.

Yep PIARC days they group you on times and shuffle groups during the day on times

Didn't think they did at the last one, might depend on how many entries and the time spread?

They might factor in the car class for groupings along with specified time. Both are on the My Car page on www.meecamsau.com. Most people would be E-H?

Motorsport Information

Group 5 Sprint Class 

STANDARD CAR CLASS
Class A - Up to 1600 cc
Class B - 1601 to 2000 cc
Class C - 2001 to 3000 cc
Class D - over 3000 cc

MODIFIED CAR CLASS
Class E - Up to 1600 cc
Class F - 1601 to 2000 cc
Class G - 2001 to 3000 cc
Class H - over 3000 cc

RACING CAR CLASS/SPECIALS
Class I - Closed Racing Cars up to 2500cc 
Class J - Closed Racing Cars 2501cc over
Class K - Open Racing Cars. All Capacities
Link to comment
Share on other sites

actually most of entrants would be in A-D

E-H are those with engine swaps, stripped down with aero work...think richo's skyline.

http://www.piarc.com.au/files/Feb%202015%20Sprint%20Regs.pdf

Classes A, B, C & D are for road-registered cars using generally road-going equipment only. All cars using racing
tyres, or slicks, will be classified as specials, as will be excessively modified road cars. The organisers reserve the
right to re-classify cars, following vehicle scrutiny. For full details of modifications allowed in each class see Group 5
Speed Event regulations. The organisers reserve the right to amalgamate classes if in their opinion entries are
insufficient to warrant a separate class.
Link to comment
Share on other sites

actually most of entrants would be in A-D

E-H are those with engine swaps, stripped down with aero work...think richo's skyline.

http://www.piarc.com.au/files/Feb%202015%20Sprint%20Regs.pdf

Classes A, B, C & D are for road-registered cars using generally road-going equipment only. All cars using racing
tyres, or slicks, will be classified as specials, as will be excessively modified road cars. The organisers reserve the
right to re-classify cars, following vehicle scrutiny. For full details of modifications allowed in each class see Group 5
Speed Event regulations. The organisers reserve the right to amalgamate classes if in their opinion entries are
insufficient to warrant a separate class.

I'm in Class H with my car when I compete at PIARC events...

Link to comment
Share on other sites

Anyone that is entered and/or spectating - Please post up to confirm you are coming.

Also if you are doing a single day OR the two days (there is Prac on Sat some are attending).

I need to know for catering purposes for lunch of Steaks/Skewers and the like over the two days.

Thanks in advance!

Link to comment
Share on other sites

Anyone that is entered and/or spectating - Please post up to confirm you are coming.

Also if you are doing a single day OR the two days (there is Prac on Sat some are attending).

I need to know for catering purposes for lunch of Steaks/Skewers and the like over the two days.

Thanks in advance!

In for proteins

Just racing on Sunday

Link to comment
Share on other sites

Anyone that is entered and/or spectating - Please post up to confirm you are coming.

Also if you are doing a single day OR the two days (there is Prac on Sat some are attending).

I need to know for catering purposes for lunch of Steaks/Skewers and the like over the two days.

Thanks in advance!

Robyn and I will be there on Sunday for sure, steak will be needed :P

Link to comment
Share on other sites

Haven't entered yet but I will at some point.

At the briefing they usually ask if there are any first timers. Just let them know and they'll either do a parade lap at low speed or get an experienced driver to passenger with you on the first session.

Didn't think they did at the last one, might depend on how many entries and the time spread?

They might factor in the car class for groupings along with specified time. Both are on the My Car page on www.meecamsau.com. Most people would be E-H?

Motorsport Information

Group 5 Sprint Class 

STANDARD CAR CLASS
Class A - Up to 1600 cc
Class B - 1601 to 2000 cc
Class C - 2001 to 3000 cc
Class D - over 3000 cc

MODIFIED CAR CLASS
Class E - Up to 1600 cc
Class F - 1601 to 2000 cc
Class G - 2001 to 3000 cc
Class H - over 3000 cc

RACING CAR CLASS/SPECIALS
Class I - Closed Racing Cars up to 2500cc 
Class J - Closed Racing Cars 2501cc over
Class K - Open Racing Cars. All Capacities

I just put down Modern 2WD for the meeca site lol.

f**ked if I know TBH... I just put down the laptimes section though, I think that would hold far more relevance.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...