Jump to content
SAU Community

Motorsport Round 1 - Phillip Island


ssxRicho

Recommended Posts

^ ummmm...now is probably not the time to tell you that he didn't even scruntineer my car, look at my helmet, extinguisher or car in general. I literally drove past him (at about 7:15am mind you) got a sticker and continued on my way.

Change of subject, awesome day - Ash, thanks for the delicious BBQ, SAUVIC, thanks for the garage for chill times.

  • Like 2
Link to comment
Share on other sites

I got the steering lock thing too... and that i need to have a key hanging out the boot lid....

just let it slide, if they actually stopped anyone racing then it night have been a different story.

Link to comment
Share on other sites

I just happened to be on PI for a holiday, early Saturday morning walks I bumped into the Heasman's crew and easily got talked into heading to the circuit to check things out.

Managed to meet a couple of SAU members, checked out the R33 GTR, R34 GTR, S13, S14, S15, R33 GTSt, Commodore, and the Ginetta (from a distance).

Today was a travel day to return home, pity I missed a chance to meet more SAU members. The Vic scene looks healthy, and people approachable for a yarn. Club motorsport is where it's at.

And I finally got to see why PI is raved about - I'd like to bring my car there for a run but it's a long drive from Qld. The only negative I found was the weather down in those latitudes is everything it's cracked up to be... :yucky:;)

  • Like 2
Link to comment
Share on other sites

Evo Brake rotors are warped and shuddery when hot, Pads almost done...

And ABS kicking in constantly after I got some heat into the race spec nankang tyres ;)

Either way, got a few sessions in because I decided to call it to preserve my daily, was good to see how it performed out there. Would be a monster on good tyres and some fresh rotors / pads :) Was a lot of fun wrestling with it during a 4 wheel slide :D

I didn't even get out of my car during scruitineering, rolled in... he opened the boot and closed it in 2 seconds, same with the bonnet, stuck a sticker on and off I went. Didn't even look at my fire extinguisher or helmet :P

Really good day and heaps of new people to talk to! Very positive to start to the SAUVic Motorsport Season

Link to comment
Share on other sites

I walked into the office to sign in, and the girl saw my SAU Shirt and said "Damn, another one of you!!"... and the guy said to her in a loud whisper "Shhhhhh, they're funding the day!"

did lol

  • Like 2
Link to comment
Share on other sites

First time at PI and had an awesome day!

Only managed one or two sessions but car should be right for next time

I need to get myself one of those SAU Motorsport shirts!

And thanks to Ash for the BBQ!

Did you end up having enough fuel to get home? I got home with 1/3 of a tank and 30L spare in jerries haha.

Link to comment
Share on other sites

Did you end up having enough fuel to get home? I got home with 1/3 of a tank and 30L spare in jerries haha.

Yeah had enough fuel!

Only becuase i missed 2 sessions and only ran half laps of another 2 sessions .

Had about 1/3 of tank. Used 1/2 a tank and 3 jerry cans for the day still

Saw you beep on the way home :thumbsup:

  • Like 1
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...