Jump to content
SAU Community

Recommended Posts

Ok i just went today to get my new 17inch 255/45 tyres fitted to my r34gtt rims, on my r33 gtst. i originally had 235/45 17 inch but decided to go bigger for more traction... The guy at the tyre place said that these are 2 big for the guards and i need to get them rolled... he says that the 255's will give me less traction than the 235's cause they will dement and go out of shape when on the roll? What should i do, are the 255's really to big for my r33 or should i go and get 255/40 profile to narrow them down a little?

Link to comment
https://www.sau.com.au/forums/topic/45277-tyre-size-for-r33/
Share on other sites

Sounds like you need to find a new tyre shop. If you have high enough tyre pressures a 255 will always have more grip than a 235 of the same tyre.

With the correct offset in the wheels, people have fitted up to 275s. I had 265s on mine but did need to get the guards rolled. Also, its unlikely he can tell for sure that the tyres are too big unless he has actually fit them.

Link to comment
https://www.sau.com.au/forums/topic/45277-tyre-size-for-r33/#findComment-922618
Share on other sites

I can't really go any wider that 235 on the front, but it probably wouldn't be an issue if my car wasn't so low. I ran 255's on the rear wthout any trouble at all and will soon be going to a 275, which will probably require a bit of guard rolling. You really shouldn't try to go to a 255 on the GT-T rims though as they are not wide enough as blade stated.

Link to comment
https://www.sau.com.au/forums/topic/45277-tyre-size-for-r33/#findComment-922959
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
×
×
  • Create New...