Jump to content
SAU Community

Recommended Posts

im also interested to see how it stands up to general road shit and more importantly, cleaning afterwards as its still a daily afterall.

bth if the matt look grows on me i will either get it painted or maby look at a cf option.

How has the plastidip lasted on the front lip?

Well for now im still in refurbish mode so lots of little jobs and simple things.
i have an ever growing list which im slowly plugging away at.

Im going to the adelaide hills next week to see Josh @ Forge performance who i met on a cruse a while ago, we got talking about a few things.
but for now were just redoing the 100,000k service which was done on the car prior to me buying. The idler pulley is noisy due to, i assume, being over tightened. i have already done all the other belts and hoses ect so only need to do timing belt, water pumps pulleys ect.
maby even the diff bushes and the likes if we find time.

I still need to have my throttle bodies adjusted properly as i have a 1200rpm idle and no more adjustment left on the idle control valve.
we were supposed to address this when we did the heater hoses but somehow the boys at paul pavlou managed to do them quickly without removing the plenum. black magic....
so im hoping the TBs have just been cleaned incorrectly and we can just use the Tomei re-sealing stuff otherwise yeah its the whole reset and adjust job which i understand i a labor intensive job and something i should not attempt myself.

I also purchased some RE01 tires which should get fitted next week as, well you saw the tires im currently on are totally gone.

Im still cleaning up the interior, tossing up between replacement mint condition gtr seats or going brides, aswell as replacing trims like c pillars and y'know all the usual suspects.

if i find time this weekend i will rewire the stereo and replace the speakers with something half decent until i feel like spending good money for something quality, but i have an amp and a little sub doing nothing.


looking forward to more interesting plans-

new swaybars, maby new coilovers.
new wheels with proper fitment, probably 18X9.5+12 ish
new turbos for more response and reliability
eventually go haltech and maby a simple e85 setup.
still no plans to chase big power numbers, maby 300 ->350atw kw on a conservative tune.

and just kinda go from there, depending on what crops up during daily life and what becomes available along the way.

i did consider trying my hand at a full car vinyl wrap in a crazy colour for funzies... might still give this ago but its just a fun thing i have always felt like doing. i know how far-removed that is from keeping a "clean stockish GTR"

I have done a bit of a search but come up empty, hopefully someone can help.

i want to mount a hydraulic jack in the boot of the gtr.
hopefully right up forward behind the backseat.
i remember seeing a mounting bracket which held the jack and bar with an easy release.

does anyone know where these can be found, or would it be a custom thing?

more maintenance.

FINALLY found time to get the timing belt redone.
it had a gates belt which ws over tightened by the previous owner which, as they do, wined and annoyed the hell out of me.

Josh at Forge performance *champ btw, do recomend* fitted a new genuine belt and all pulleys and water pump.
finaly its quiet. so quiet. love it.

we did however find that one of the locator pins had snapped off but managed to get the timing right so didn't have to remove the camshaft luckily.

10628341_886467111413537_515874847727890

one thing which we did notice was how dirty the cooling system was :/
remember i had the coolant done when i blew the heater hoses 3000km ago, there was quite a bit of shit in the pipes so we did a full flush and replaced with the propper long life spec blue coolant.
the water pump (old and warn) didnt have much of a build up nor did the block from what we could see, but all nice and clean now.

received_1116884935004148_zpsu5nnpmkl.jp

so finally managed to take her out, no noises, no problems, new tires, for a good belt in the hills. even if it was pissing down :)

74c1a82d-8754-480d-a8ba-361f347ca280_zps

  • Like 3

i did buy a set of re01s but the tire size was too small and my speedo reading is already reading to high, i don't want a %15 speedo discrepancy so i moved them on.

for now i am using Khumo KU39s of the correct size until i get new wheels in 18"

spot of weekend drama, came out of work to a flat tire which was annoying as they're obviously brand new, assuming i had a lucky nail.
pulled it off and no nail in site we inspected the wheel and found a 1inch crack on the barrel of one of the enkies.

friend of a friend who is a wheel repairer was nice enough to come down and laid a sweet fat weld to fix her up.
unsure on where it came from as there were no other impact signs or other stress marks.
oh well.

Edited by GH05T

haha, yeah i will be redoing the pipework soon anyway, need to pull it apart soon to do the split intake modification and remove the plenum for repainting and TB reset. will address it then.

  • 2 weeks later...

20150501_193434_zpsg9fz0ki7.jpg

.................... asshole


seems i spoke too soon :P

ok this time it looks like i will have to remove the plenum and do it properly.
i dont know how many hoses are under there but i have replaced quite a few now. going to replace all of them.
f**king heater box better not join this little leak party.

on the plus side we can repaint my plenum :)

Edited by GH05T

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
    • Was that Australia Delivered Duncan? Does it have siren etc?   I used to have remote start on an old 32 two decades ago, it was a cool feature. I used to wake up early in winter for work. Start it and by the time i was out the door a few minutes later the engine was warmed up and the heaters had the car toasty. It was great.    I don’t mine the ambience lighting.  I drive a western star and it has footwell lights and ambient lighting and it’s great! From the pics of seen of them installed in a skyline I think it’s a nice touch 
    • re the security system, my Fuga/Q70 has the factory option where the puddle lights in the mirrors turn on when the prox key is detected, it was clearly dealer fitted and has a switch in the lower dash to disable it....it didn't have remote start but TBH I don't really miss that, I had it in the Stagea originally but never used it....we don't often have to warm the car up in the snow before we get in for Australia. And the Fuga also has the illuminated footwells, sounds like a useless feature but I actually quite like the indirect light within the car, it was a nice addition
    • Ok now I’m extremely jealous 
×
×
  • Create New...