Stripped Out Torx Screw While Trying To Remove Gtt Steering Wheel Airbag, Need Help Fast

[YYC34GTT]

I have follow the instruction that i found here which is great, but I can not get pass a problem that occur.

here is the link of the instruction of how to remove steering wheel/airbag

http://www.sau.com.au/forums/topic/369146-skyline-r34-remove-replace-steering-wheel-airbag-resetting-airbag-alarm/

My problem is that the Torx Screw thats holding the airbag frame is on pretty tight, and I was trying really hard to remove the screw that I ended up stripping it. Now I have that problem, any advise on how I can solve this problem?before I start hacking/drilling. I was thinking using a screw extractor, but the screw it self on really tight

Help please

Reason I am doing this I am planning on swaping the airbag with S15 airbag.

[Mick_o]

Know how to tig weld?

[r32-25t]

Drill the head off of the bolt

[GTRPSI]

Get in there with a dremel and make a flat blade cut out.

Get a impart driver and whack it with a hammer while twisting it into the undo direction.

[YYC34GTT]

I am thinking all of these idea, but my main concern is that I do not want to damage the airbag or anything else,