Rb25 Slave Cylinder Travel

[WrenchesInTheGears]

Hi there.

Have got an r32 with rb25 engine and gearbox.

have got about 18-19mm of travel at the slave cylinder but it is not enough to properly release the clutch.

Have changed the master to a 33 one but made no difference.

have adjusted the master cylinder pushrod completely but max get about 19mm travel

Can anyone confirm the correct amount of travel for the slave cylinder on an r33 gtst?

have also tried longer rod in the slave but makes no difference and also tried a different, larger thrust bearing carrier.

[Dobz]

Has all the air been bled from the line?

[WrenchesInTheGears]

Yes

[iruvyouskyrine]

18-19mm is more then enough travel. Your problem lies elsewhere.

[KiwiRS4T]

New clutch time?

[WrenchesInTheGears]

Can anyone actually confirm the travel?

as in get under there car and measure it for me as I want to confirm 100% Would be much appreciated

Car already has a new clutch and I still suspect a hydraulic issue but want to make sure.

[iruvyouskyrine]

Around 20mm. Travel is fine.