Jump to content
SAU Community

Recommended Posts

Found some parts in my shed I never used on my Stagea which is now long gone.

Prefer pickup from Brisbane, Milton, Ashgrove, Camp Hill areas. Parts are in Camp Hill until next week then off to Ashgrove.

Maroon/dark red rear bar with black bump strip, cut in bar for larger exhaust - $100 ono

Maroon/dark red front and rear pods, one has small crack, one scuffed - $50 ono

RB25DET rocker covers, was going to replace my ones with cracked bolt holes, some bolts/washers included - $100 ono

Front strut bar with original RS Four sticker - $100 ono

Set of 6 working (when pulled from engine) RB25DET Neo6 coilpacks - $100 ono

Cover/handle/plastic trim from left side of front passenger seat - $30 ono

Full set (front [DB1696GCT] and rear [DB1399GCT]) of Bendix brakes for WGNC34 - $150 ono

Set of rear seat belts with good condition tensioners - $75 ono

Cup holders, I believe someone has hacked this one a bit - $25 ono

Random oil filter (Bosch ON 052) that might not even be for RB25DET - $5

Photos (if uploads fail): https://www.dropbox.com/sh/zb87qo243etfc6d/AAD0vHQoHjmVVJ6AC4CmzgtMa?dl=0

  • 2 weeks later...

if u still have that cup holder i might be interested. do u have any pics showing where its been "hacked"??

Gidday Ray, I'll grab some closer pictures tonight when I find the box of stuff

These are photos that depict the cup holder screw points seem to have been filed/attacked.

Just seem to be the front screw mount on left and right side. Rearwards screw mounts are intact.

The mechanism to pop the cup holders still works fine too

post-104791-0-83392800-1423570494_thumb.jpg

post-104791-0-49438100-1423570562_thumb.jpg

post-104791-0-01099700-1423570639_thumb.jpg

Edited by wookster
  • 2 weeks later...

Need this stuff out of my shed. Prices reduced (cannot edit original post). Make some offers!



Maroon/dark red rear bar with black bump strip, cut in bar for larger exhaust - $100 $80 ono


RB25DET rocker covers, was going to replace my ones with cracked bolt holes, some bolts/washers included - $100 $80 ono


Genuine adjustable front strut bar with original RS Four sticker-$100 $80 ono


Set of 6 working (when pulled from engine) RB25DET Neo6 coilpacks - $100 $80 ono


Cover/handle/plastic trim from left side of front passenger seat - $30 $20 ono


Full set (front [DB1696GCT] and rear [DB1399GCT]) of Bendix brakes for WGNC34 - $150 $125 ono


Set of rear seat belts with good condition tensioners - $75 $60 ono


Cup holders, I believe someone has hacked this one a bit - $25 $20 ono


Random oil filter (Bosch ON 052) that might not even be for RB25DET - $5


45V4 - standard turbo off my WGNC34 RB25DET NEO6 Stagea worked perfect. No discernable shaft play - $250 $225 ono


  • 3 weeks later...

This stuff is still around; continually reducing until someone gets it.



Maroon/dark red rear bar with black bump strip, cut in bar for larger exhaust - $100 $60 ono


RB25DET rocker covers, was going to replace my ones with cracked bolt holes, some bolts/washers included - $100 $60 ono


Genuine adjustable front strut bar with original RS Four sticker-$100 $70 ono


Set of 6 working (when pulled from engine) RB25DET Neo6 coilpacks - $100 $70 ono


Cover/handle/plastic trim from left side of front passenger seat - $30 $10 ono


Full set (front [DB1696GCT] and rear [DB1399GCT]) of Bendix brakes for WGNC34 - $150 $115 ono


Set of rear seat belts with good condition tensioners - $75 $40 ono


Cup holders, I believe someone has hacked this one a bit - $25 $15 ono


Random oil filter (Bosch ON 052) that might not even be for RB25DET - $5


45V4 - standard turbo off my WGNC34 RB25DET NEO6 Stagea worked perfect. No discernable shaft play - $250 $200 ono


  • 5 months later...

Only these parts left! Prices dropped further



Maroon/dark red rear bar with black bump strip, cut in bar for larger exhaust - $100 $50 ono


Genuine adjustable front strut bar with original RS Four sticker-$100 $70 ono


Set of 6 working (when pulled from engine) RB25DET Neo6 coilpacks - $100 $65 ono


Cover/handle/plastic trim from left side of front passenger seat - $30 $10 ono


Full set (front [DB1696GCT] and rear [DB1399GCT]) of Bendix brakes for WGNC34 - $150 $110 ono


Set of rear seat belts with good condition tensioners - $75 $40 ono


Random oil filter (Bosch ON 052) that might not even be for RB25DET - $5


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • We will review wtf is going on, but if you made any donations let me know and i will follow it up with the admins
    • See, that button sounds like perfection Duncan! My eyes really don't like light shining at them from a dash when I'm driving. Being part red colourblind, I've found for most cars that I can change colours on, I set everything to red, so my eyes see the elast amount of colour! I miss normal gauges in cars
    • bro, knowing the Japanese in  the 90's, i wouldn't be surprised if they shared components across their model lineup.
    • Maaaan so many "little" things  i rly hope my old RB20 would be "ok" and not too bad. I try to learn what and what not do i need. I look at crossmember at it looks different...even parts numbers are different. Wiring and all that i rly do not know...yeah someone mentioned the speedo thing. On that yoke clip. I rly do not know what can and cant be done "custom" so that is why iam asking to know and not be suprised 🙂  I know what it looks like  
    • Oh, there's also the gearbox crossmember which will probably be different between the small box and the big box, and the wiring loom will probably need to be modified, because the plugs for the switches etc, will probably be different. And I think the speedo on the small box R34s is from somwhere stupid, like the diff, possibly, so you'd need to work out what needs to be done about that (assuming it is different). I think the thing you need to realise is that the front end of that yoke is a large hollow tube with splines on the inside that mates with the splines on the box's output shaft. It is a dedicated thing - not available "aftermarket". They were made to suit that box, by the car's OEM.
×
×
  • Create New...