Jump to content
SAU Community

Problem With R34 Engine Light Come On Under Load P1320 Ign Signal Primary Help :)


Recommended Posts

code P1320 IGN signal primary

having problems with r34 non turbo engine light keeps coming on mainly when cold or when revs over 5000rpm and starts to miss sometimes is also running rich

so far have changed coil packs (spit fires) plugs , ecu, airflow meter, cas

and has not really made much difference

has anyone had similar problem

next thing to try is tps or get injectors cleaned or fuel pressure reg

and info would be a great help thanks

Is it causing an actual problem with the car?

Seen as you can read the code, can you also monitor/log data?

I would be doing that with anything ignition related that you could think of. RPM, Ignition angle and anything else that looks related. See if anything drops off all of a sudden.

Did you replace the coils with brand new ones? Try checking the wiring for problems. You can use a multimeter to check for resistance between the coilpacks and ECU etc. But multimeter wont always show a problem, as it may need some electrical load before it loses continuity. Still worth a look

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't do it if your gearbox box has already having syncro issues. The short hifter will put a greater load on them. If you must I remember Nismo did a shorter shifter, with the top part being physically shorter and the part that went into the gearbox was the same as stock. In saying that I've had a C's short shifter (I think) in mine for many years, which was given to me as the previous owner was not sympathetic to the gearbox. Thus forwarned I was careful and had to modify my normal changing style. You have to be super accurate with your clutch and shifts
    • Well, after a week of daily driving and having to crawl out between the wheel and the side intrusion bars. I got myself a quick release setup. I went with an NRG short hub and Quick Release with some cute heart cutouts on the pull tabs. Nice and matchy matchy with the rest of the interior accents I have going on.  The only downside is the total stack height even with the short adapter is longer than the old HKB boss kit. Luckily I had some adjustment left on the column so move the wheel away.
    • stock shifter with new bushes, springs and cup will improve it. Gktech do all the bits. The opinion as the years have gone on is the redline is not great in old gearboxes.
    • Hi all   what short shifter do you use on your skykine r34?   my synchronous does have a problem and i was getting huge delay and grinding sound between 2nd and 3rd, did put shockproof red heavy stuff and it is great now/ no issues   would in your view short shifter screw this up?   people seems to suggest/ use cube short shifter and there is standard and premium. Seen review of premium as much better and less play. Thoughts?
    • Yeah, there's a bit of a density and friability difference between pebbles and any of those other things. Silicone will definitely float in oil and so will be mobile enough to move around. Although, again, if it is upstream of the filter it really shouldn't go any further. I would only ever worry about silicone when it is in places downstream of the filter. Upstream of the pickup is a whole 'nother matter. We've all seen what that does. I have seen the most abominable crap settled out in industrial gearboxes, trunnion lube systems and the like, without any sign that any of it has touched anything in the machine. Just chilling in the bottom, waiting for the inevitable operator error that causes the whole machine to need to be dismantled for repairs.
×
×
  • Create New...