Jump to content
SAU Community

Wolf3d V4 Basemap For R32/33gtst

haydenrowe

By haydenrowe,
in Engines & Forced Induction

 Share

Recommended Posts

GTSBoy Grand Master

GTSBoy

Posted
Posted

Can't imagine that they are the same tune file. The AFMs have similar capacity, but the injectors are totally different (25 are 370cc, 20 are 270cc) and there are differences in how the TPS works and so on.

So you really want a 20 file. Have you thought about asking AEMS or (whoever they are)?

haydenrowe Newbie

haydenrowe

Posted
  • Author
Posted

I have emailed them and they have indicated they will get back To me. Just thought I'd see if anyone had one that could work ad I'd like to get it running.

From what I can see the p&p units come with the same base setup for the two models.

Scott Black Rising Star

Scott Black

Posted
Posted

is it ve based or still pulsewidth ms for fuel tables,

if its ve based, enter all the crap you need into the settings, then just put 100 across the entire map and 15degrees timing and it should be able to make it start from that.

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • niZmO_Man
      forum.r31skylineclub.com down or gone?

      By niZmO_Man · Posted

      We will review wtf is going on, but if you made any donations let me know and i will follow it up with the admins
    • MBS206
      Pillar gauges

      By MBS206 · Posted

      See, that button sounds like perfection Duncan! My eyes really don't like light shining at them from a dash when I'm driving. Being part red colourblind, I've found for most cars that I can change colours on, I set everything to red, so my eyes see the elast amount of colour! I miss normal gauges in cars
    • niZmO_Man
      R33 rear seatbelts

      By niZmO_Man · Posted

      bro, knowing the Japanese in  the 90's, i wouldn't be surprised if they shared components across their model lineup.
    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr · Posted

      Maaaan so many "little" things  i rly hope my old RB20 would be "ok" and not too bad. I try to learn what and what not do i need. I look at crossmember at it looks different...even parts numbers are different. Wiring and all that i rly do not know...yeah someone mentioned the speedo thing. On that yoke clip. I rly do not know what can and cant be done "custom" so that is why iam asking to know and not be suprised 🙂  I know what it looks like  
    • GTSBoy
      Possible swap on R34 RB20DE NEO?

      By GTSBoy · Posted

      Oh, there's also the gearbox crossmember which will probably be different between the small box and the big box, and the wiring loom will probably need to be modified, because the plugs for the switches etc, will probably be different. And I think the speedo on the small box R34s is from somwhere stupid, like the diff, possibly, so you'd need to work out what needs to be done about that (assuming it is different). I think the thing you need to realise is that the front end of that yoke is a large hollow tube with splines on the inside that mates with the splines on the box's output shaft. It is a dedicated thing - not available "aftermarket". They were made to suit that box, by the car's OEM.
×
×
  • Create New...