Jump to content
SAU Community

No More E-flex At Caltex Pendle Hill End Of February 2015


Andrew R33
 Share

Recommended Posts

  • 2 months later...

Couldn't take the price rise, so I got it retuned back onto 98. Just got it back from Jez, still got a sweet 218rwkw. Will be nice having more than one pump to fill up from :)

What a tight kent! Pay $600 - $800 for a tune to lose power and gain what maybe 3 or 4L/100km? Seems like false ecomomy to me. The money spent on tuning back to 98 would still outweigh your fuel bill ;)

Eflex is still 20c cheaper than E10. I dont care how much it costs i will never use petrol again!

Sell your skyline and buy a VW polo 1.2L of turbo fury and you will get 6-7L/100km in Sydney traffic..

  • Like 4
Link to comment
Share on other sites

I was gonna have a Flex Tune done on the Stagea, but that would have meant the expense involved in buying a new computer (it's been running a PFC for about 7 years now) and having it tuned to suit, which was more than it was worth seeing as it's hard to get E-flex fuel on any of the roads that I regularly travel. The Caltex at Girraween would have been closest (and just around the corner from Unigroup too), but I rarely drive through there.

Link to comment
Share on other sites

It was a combination of things. Not just the price rise but the being able to just go and fill up where ever I happen to be at the time, makes my life a lot easier, especially since the E85 pump I was using is not as close to me as it used to be since I moved. Jez mentioned that Nistune can do a flex fuel setup now, and that would have been cool, but with needing a timing belt done as well, didn't have the coin, maybe something for the future since he has both my tunes available for me now.

Also, e-flex might be 20c cheaper than E10, but at the United it's more expensive than E10, it costs the same as their regular unleaded.

@pol1on1 the retune was $880, included draining the fuel tank of the E85 that was left over after the drive up there.
Edited by cherring
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Latest Posts

    • There's probably an underlying issue with the A/C system too. I recently fixed mine, now it's fully control by the Haltech and car's factory HVAC controller  Have a squiz here:    
    • And by the way, I've also checked the ECU diagnostic numerous times and got a bad O2 sensor code and initially an Ignition Primary code, which is why I replaced the O2 sensor and all the ignition components (coil packa, plug and loom). No codes have been coming up lately despite the ongoing issue.
    • Hey pber13, unfortunately still no luck. At this point the following has been done with little or no success: - Spark plugs replaced, gapped to 0.8mm - Splitfire coilpacks installed to replace originals - Replaced Ignition Coil/Coilpack harness with a new genuine nissan one - New fuel filter - Replaced AFM/MAF sensor - Injectors have been thoroughly cleaned with an online flush (without removing) - Upper engine and inlet decarbed - blew tons of black smoke out, cleared the carbon deposits from the top of the engine and exhaust.  - IACV removed and thoroughly cleaned with carburettor cleaner - O2 sensor replaced with new and genuine one -  Smoke test revealed no vacuum leaks - Healthy compression test of 160psi across all 6 cylinders Overall the car does run a lot smoother now, no backfires between gear shifts like it did originally... but the rough idle when warmed up is still there. It may not even be a misfire but simply a rough idle. Seems crazy to me that so many people have had this issue and seemingly no one has gotten to the bottom of it, or at least never bothered to post if they did! Hope you have more luck than I did pber13, I'm at a point now where I'm just going to try to ignore it unless it gets worse. Would love to fix it but I've genuinely run out of ideas of what it could be.
    • I got the full frenchys kit too. Really awesome kit. Easy to install my only complaint was the hardlines I think could be routed differently (I modified mine) but I realise the kit needs to suit multiple applications. This was the hard lines before I modified them. They were touching the wastegate pipe. I ended up reducing the distance between firewall and first bend. The made it so they tucked along the frame rail.
    • Deeve, I don't suppose that you've made any progress on this? My Stagea has the exact same problem, and just like you, I've read through as much as I can online, with no real progress. My car isn't throwing any codes at all, which is a little frustrating. I've changed plugs, checked the wiring and harness. A new MAF gets here next week, but I'm not hopeful it will solve the issue.
×
×
  • Create New...