Jump to content
SAU Community

Recommended Posts

Hey ya,

Since my engine is now built i was thinking of upgrading my drivetrain.

I can pickup a brand new Nismo Conversion kit of the R32 to the 6spd R34 Getrag.

This kit includes

1) Getrag 6spd

2) Transfer case

3) Twin plate nismo super coppermix clutch

4) Front prop shaft

5) Cross member

6) Shift knob.

I can get this for about $8000 USD and the thing I like is it will have 0 km's on them.

What is everyones thoughts? Im thinking eventually I will need a new clutch (not required yet) and my transfer case is 25 years old and my gear box as well. So if I rebuild/strengthen these I am looking at not much more for the getrag.

Also I have heard the 4.111 ratios of the r32 and the 6spd make for abit of fun?????

Link to comment
https://www.sau.com.au/forums/topic/453782-r32-gtr-getrag-conversion/
Share on other sites

  • 1 month later...

or you could try to get a AG-Y tranny, their strenghtening SS690 box is going for 200k yen. Transfer case from AG-Y is another 80k. Add 2k for anothe rbran dnew clutch if you wish. youre at 5000k yen ( which is about 3.5us I believe right?) Your still paying about 3-4k more for this mod. I believe both box would be of same strenght, so you decide if the ratio/6speed is worh that extra money.

  • 1 month later...

no idea, but you dont hear of many breaking. alot of the Japan wangan warriors i.e. 700hp+ 34 GTRs all appear to run the standard box.

locally mercury Motorsport had one in their R34 GTR until going to a OS88 i am fairly certain they changed this out due to wanting to go to sequential not due to a breakage it at 800+hp

i have personally been running one in my 740whp 32 GTR for 3 months now, doing a few track days, racewars and general driving in that time with no issues.

only issues i have found is a total lack of traction in 1st gear so need to do 2nd gear launches to get the best out of it.

Also due to the gears being closer together it is common to miss a gear i.e. go from 2nd to 5th as oppose to 3rd, But i guess that comes down to getting used to the box and being a better driver.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've watched some vids and the technique seems to be to butt the sheets up to one another and use MIG to spot weld and slowly fill in the spots until its eventually all sealed. No runs as you would normally do, as there's too much heat generated that way. Yeah my stick welds are terrible these days because its been so long since i've done any of it. I expect to be spending many hours practicing
    • I have personally seen a Tomei USA RB26 cam that didn't even fit the head. Kind of nuts to me that it was even possible for that to happen but such is life.  There's two UP Garages in the US. One is a US branch of the Japanese company which sells things they brought over at tremendous markup. The other is University Place Garage/Fairlady Motors which is a shop best known for putting VCAM in RBs and trying to convince people to stop putting in 800hp of turbo on a 2.5L motor.
    • Gasless MIG is not exactly suited to what I would call "delicate" or "attractive" welding. So I would rule it out for sheet metal rust repair type stuff, unless you're only doing it in hidden places. I'm thinking about getting myself a gasless MIG for "hack together" type work. Noting that my welding experience is very very low, and quite a long time ago. So I'm also looking for "simple", but I'm not expecting "excellent". I'm not even sure that proper MIG is the best for sheet metal work. I get the feeling that the degree of control and the minimisation of heat input that you get from TIG is probably what you really want. And then you have to get good at doing it before the welds won't look like a monkey flinging a handful of shit anyway. You're probably SOL for an easy and cheap way to get from where you are to where you want to be. Much like myself.
    • Any recommendations for what would be the easiest welding type to start on, for sheet metal rust repairs and maybe some exhaust piping too? Seems like MIG is the most common. Would gasless MIG be ok to learn on and do some simple jobs? I have a stick welder which has a Lift TIG setting, but i'm more interested in getting whatever's easiest to do, and most suitable, rather than using what i have.
    • Is the UP Garage in the US of Ayyeee even the real UP Garage?
×
×
  • Create New...