Jump to content
SAU Community

R32 Gtr Getrag Conversion

Stixbnr32
 Share

Recommended Posts

Piggaz Grand Master

Piggaz

Posted
Posted

Interested to hear what people think of a 34 box vs standard 32 box strength

When I asked Terry at Award about this he said forget it. It won't last. He fixes "heaps of them"

However, you don't hear many busting. Who knows :/

Link to comment
Share on other sites
  • 4 years later...
GraLin34 Rookie

GraLin34

Posted
Posted
On 2/12/2015 at 3:16 PM, Stixbnr32 said:

Hey ya,

Since my engine is now built i was thinking of upgrading my drivetrain.

I can pickup a brand new Nismo Conversion kit of the R32 to the 6spd R34 Getrag.

This kit includes

1) Getrag 6spd

2) Transfer case

3) Twin plate nismo super coppermix clutch

4) Front prop shaft

5) Cross member

6) Shift knob.

I can get this for about $8000 USD and the thing I like is it will have 0 km's on them.

What is everyones thoughts? Im thinking eventually I will need a new clutch (not required yet) and my transfer case is 25 years old and my gear box as well. So if I rebuild/strengthen these I am looking at not much more for the getrag.

Also I have heard the 4.111 ratios of the r32 and the 6spd make for abit of fun?????

I'm a fair bit late to this topic.. however I would love to know where I can pick up this upgrade package.. 

T.I.A.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 70RTY
      JDM R35 Bought at Japanese Auction

      By 70RTY · Posted

      Hi all,   I have bought a JDM R35 at auction in Japan.  This is my second JDM GTR after owning one back in 2009.  I have made a couple of videos that may interest some forum members.  One is collecting the GTR from the compliance shop (and seeing it for the first time) and another on the process of buying and importing a car from Japan.  I'm new to this and would appreciate your thoughts, as well as a subscribe!    
    • aimre
      RB30 Struggles from idle

      By aimre · Posted

      Sorry, AFM.    Will edit original post
    • GTSBoy
      R32 Gtr Long Term Love, Now Project

      By GTSBoy · Posted

      Oh, yeah, no arguing that the duty cycle is different. And a circuit car will go to those speeds for more distance and longer times. But, I suspect that if a tailshaft has a harmonic problem, that it would cause damage and shit itself maybe even on the first pass. A second or two of running at the resonant/harmonic problem speed is already a couple hundred revolutions.
    • Dose Pipe Sutututu
      R32 Gtr Long Term Love, Now Project

      By Dose Pipe Sutututu · Posted

      Shaft speed would be the same, however it's how long they hold it there for and repeated conditions. FWIW half way down the main straight at SMSP I'm bouncing off 4th with a 8600RPM limiter. That shaft would be spinning at 8600RPM for a few seconds before I need to smash the brakes, by T2 it's getting close to that speed again. Now a drag car/roll race car would see that shaft speed for a 1 to 2 secs then they would coast, hit the brakes and that's it.
    • GTSBoy
      R32 Gtr Long Term Love, Now Project

      By GTSBoy · Posted

      With same diff ratio, tyre diameter and road speed, the tailshaft rpm is the same regardless of the gearbag's ratio. Given that very quick drag cars are probably doing similar road speeds to the fastest circuit cars (circa 300 km/h), and there will be many of either category that can't go that fast and so you'd have inummerable matchups between drag and circuit car speeds at smaller numbers, and given that they are probably using rather similar tyre diameters and probably using similar diff ratios, and...where any of those numbers were different they could quite easily be in opposite directions thus cancelling out.... I think you'd find that there'd be more similarity than difference in tailshaft speed between these two use cases, no?
×
×
  • Create New...