Jump to content
SAU Community

Recommended Posts

Pro

less restriction , potentially more power

Light weight :)

Cons

Illegal.

Environment hazard

Louder

A straight pipe makes way more sense than a bent one in place of a cat.

Couldn't figure that out yourself?

Edited by Ben C34
Link to comment
https://www.sau.com.au/forums/topic/453860-decat/#findComment-7480023
Share on other sites

Yer i gathered louder and more flow which could mean possible power gains, wasnt sure if it could potentially be harmful to the car in any way, still abit of a newbie so wanna make sure i know what im doing before i do it, i read some where that straight pipes are not good for dailys for some sort of air flow reason which is why i askd any cons about the straight pipe

Link to comment
https://www.sau.com.au/forums/topic/453860-decat/#findComment-7480038
Share on other sites

For a street car just get a good 100cell cat. You should at least make some effort to keep your car legal and not pollute the environment way more than you have to.

Decat will mean you have much blacker exhaust smoke under power (which is a give away to the cops) and your rear bar will be dirty from it.

Link to comment
https://www.sau.com.au/forums/topic/453860-decat/#findComment-7480051
Share on other sites

There is one other thing being missed.

Even a high flow cat is a waste of time if it does not meet EPA standards, there are rules to the standards and if you want to meet them expect some sort of restriction, most 100 cells dont pass emissions you may as well have no cat.

Otherwise a straight pipe through a cat shell is the way, looks like a cat but isnt, get called in for a test bolt on a stock cat.

Exhaust notes dont change much (very little) with or without a cat, a cat is not a muffler which is designed to muffel sound, its a chamber with a cell substrate inside.....

Link to comment
https://www.sau.com.au/forums/topic/453860-decat/#findComment-7480110
Share on other sites

Stock cats, especially on late model cars act as extremely good mufflers. Removing all 4 of them makes a huge difference. A highflow cat on the other hand makes no difference to exhaust noise.

My opinion, run a single 5 inch body 200cpsi euro 3 or 4 cat and enjoy a legal highflow cat that will flow 400+kw. Emissions testing is only going to become more stringent in the future, and a black bar will dob you in instantly.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/453860-decat/#findComment-7480126
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Depends how low and tyre size. Should fit with natural camber, skinny tyres and rolled guards.
    • Hi guys, planning to get 18x9 +25 in fronts and 18x10 +25 in rears been reading the whole thread and cant really find anything   Anyone know if these will fit a r34 gtt with no scrubbing or guard work needed?
    • They usually get made by hand as part of any such swap.
    • Was planning on getting an R35 MAF and the adapter, should this be okay? Also any idea where I could get my hands on an intake pipe?
    • I mean yes, if you're starting from scratch on an unknown engine yes you don't need to be doing all kinds of math in the background but if you're doing relatively minor changes like AFM + injectors + boost up with some aftermarket turbos it takes quite a bit of math if you want to do something like maintain OEM fuel + timing tables but compressed and then a bit more load scale up top. I think I've spent too much time working on big engineering nightmares though so I'm a big fan of trying to constrain the scope of whatever work I'm doing as much as possible and trying to get it right before moving on. For example, a local owner just did the usual E85 + single turbo conversion to his R32 GTR and nearly burned his car to the ground doing some spirited driving up the local mountains. Turbine is unshielded and too close to the hood insulation. It's tough to balance "just get the project done" and "seemingly small details can cause massive setbacks I'm not willing to deal with".
×
×
  • Create New...